NothingOSS/android_kernel_msm-6.1_nothing_sm7635
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

serial: sc16is7xx: remove global regmap from struct sc16is7xx_port

Browse source 
commit f6959c5217bd799bcb770b95d3c09b3244e175c6 upstream.

Remove global struct regmap so that it is more obvious that this
regmap is to be used only in the probe function.

Also add a comment to that effect in probe function.

Fixes: 3837a0379533 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port")
Cc:  <stable@vger.kernel.org>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231211171353.2901416-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Hugo Villeneuve 2023-12-11 12:13:49 -05:00 • committed by Greg Kroah-Hartman
parent 9bcb019aee
commit 6dca71e6e1
1 changed files with 9 additions and 6 deletions
Download patch file Download diff file Expand all files Collapse all files

15
drivers/tty/serial/sc16is7xx.c
View file

@ -335,7 +335,6 @@ struct sc16is7xx_one {
struct sc16is7xx_port {
const struct sc16is7xx_devtype *devtype;
struct regmap *regmap;
struct clk *clk;
#ifdef CONFIG_GPIOLIB
struct gpio_chip gpio;
@ -1415,7 +1414,8 @@ static int sc16is7xx_setup_gpio_chip(struct sc16is7xx_port *s)
/*
* Configure ports designated to operate as modem control lines.
*/
static int sc16is7xx_setup_mctrl_ports(struct sc16is7xx_port *s)
static int sc16is7xx_setup_mctrl_ports(struct sc16is7xx_port *s,
struct regmap *regmap)
{
int i;
int ret;
@ -1444,7 +1444,7 @@ static int sc16is7xx_setup_mctrl_ports(struct sc16is7xx_port *s)
if (s->mctrl_mask)
regmap_update_bits(
s->regmap,
regmap,
SC16IS7XX_IOCONTROL_REG,
SC16IS7XX_IOCONTROL_MODEM_A_BIT |
SC16IS7XX_IOCONTROL_MODEM_B_BIT, s->mctrl_mask);
@ -1476,6 +1476,10 @@ static int sc16is7xx_probe(struct device *dev,
* This device does not have an identification register that would
* tell us if we are really connected to the correct device.
* The best we can do is to check if communication is at all possible.
*
* Note: regmap[0] is used in the probe function to access registers
* common to all channels/ports, as it is guaranteed to be present on
* all variants.
*/
ret = regmap_read(regmaps[0], SC16IS7XX_LSR_REG, &val);
if (ret < 0)
@ -1511,7 +1515,6 @@ static int sc16is7xx_probe(struct device *dev,
return -EINVAL;
}
s->regmap = regmaps[0];
s->devtype = devtype;
dev_set_drvdata(dev, s);
mutex_init(&s->efr_lock);
@ -1526,7 +1529,7 @@ static int sc16is7xx_probe(struct device *dev,
sched_set_fifo(s->kworker_task);
/* reset device, purging any pending irq / data */
regmap_write(s->regmap, SC16IS7XX_IOCONTROL_REG,
regmap_write(regmaps[0], SC16IS7XX_IOCONTROL_REG,
SC16IS7XX_IOCONTROL_SRESET_BIT);
for (i = 0; i < devtype->nr_uart; ++i) {
@ -1606,7 +1609,7 @@ static int sc16is7xx_probe(struct device *dev,
s->p[u].irda_mode = true;
}
ret = sc16is7xx_setup_mctrl_ports(s);
ret = sc16is7xx_setup_mctrl_ports(s, regmaps[0]);
if (ret)
goto out_ports;