Patch series "memory tiering: hot page selection", v4.
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory nodes need to be identified.
Essentially, the original NUMA balancing implementation selects the mostly
recently accessed (MRU) pages to promote. But this isn't a perfect
algorithm to identify the hot pages. Because the pages with quite low
access frequency may be accessed eventually given the NUMA balancing page
table scanning period could be quite long (e.g. 60 seconds). So in this
patchset, we implement a new hot page identification algorithm based on
the latency between NUMA balancing page table scanning and hint page
fault. Which is a kind of mostly frequently accessed (MFU) algorithm.
In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.
A choice is to promote/demote as fast as possible. But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.
A way to resolve this issue is to restrict the max promoting/demoting
throughput. It will take longer to finish the promoting/demoting. But
the workload latency will be better. This is implemented in this patchset
as the page promotion rate limit mechanism.
The promotion hot threshold is workload and system configuration
dependent. So in this patchset, a method to adjust the hot threshold
automatically is implemented. The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit.
We used the pmbench memory accessing benchmark tested the patchset on a
2-socket server system with DRAM and PMEM installed. The test results are
as follows,
pmbench score promote rate
(accesses/s) MB/s
------------- ------------
base 146887704.1 725.6
hot selection 165695601.2 544.0
rate limit 162814569.8 165.2
auto adjustment 170495294.0 136.9
From the results above,
With hot page selection patch [1/3], the pmbench score increases about
12.8%, and promote rate (overhead) decreases about 25.0%, compared with
base kernel.
With rate limit patch [2/3], pmbench score decreases about 1.7%, and
promote rate decreases about 69.6%, compared with hot page selection
patch.
With threshold auto adjustment patch [3/3], pmbench score increases about
4.7%, and promote rate decrease about 17.1%, compared with rate limit
patch.
Baolin helped to test the patchset with MySQL on a machine which contains
1 DRAM node (30G) and 1 PMEM node (126G).
sysbench /usr/share/sysbench/oltp_read_write.lua \
......
--tables=200 \
--table-size=1000000 \
--report-interval=10 \
--threads=16 \
--time=120
The tps can be improved about 5%.
This patch (of 3):
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory node need to be identified. Essentially,
the original NUMA balancing implementation selects the mostly recently
accessed (MRU) pages to promote. But this isn't a perfect algorithm to
identify the hot pages. Because the pages with quite low access frequency
may be accessed eventually given the NUMA balancing page table scanning
period could be quite long (e.g. 60 seconds). The most frequently
accessed (MFU) algorithm is better.
So, in this patch we implemented a better hot page selection algorithm.
Which is based on NUMA balancing page table scanning and hint page fault
as follows,
- When the page tables of the processes are scanned to change PTE/PMD
to be PROT_NONE, the current time is recorded in struct page as scan
time.
- When the page is accessed, hint page fault will occur. The scan
time is gotten from the struct page. And The hint page fault
latency is defined as
hint page fault time - scan time
The shorter the hint page fault latency of a page is, the higher the
probability of their access frequency to be higher. So the hint page
fault latency is a better estimation of the page hot/cold.
It's hard to find some extra space in struct page to hold the scan time.
Fortunately, we can reuse some bits used by the original NUMA balancing.
NUMA balancing uses some bits in struct page to store the page accessing
CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the
multi-stage node selection algorithm to avoid to migrate pages shared
accessed by the NUMA nodes back and forth. But for pages in the slow
memory node, even if they are shared accessed by multiple NUMA nodes, as
long as the pages are hot, they need to be promoted to the fast memory
node. So the accessing CPU and PID information are unnecessary for the
slow memory pages. We can reuse these bits in struct page to record the
scan time. For the fast memory pages, these bits are used as before.
For the hot threshold, the default value is 1 second, which works well in
our performance test. All pages with hint page fault latency < hot
threshold will be considered hot.
It's hard for users to determine the hot threshold. So we don't provide a
kernel ABI to set it, just provide a debugfs interface for advanced users
to experiment. We will continue to work on a hot threshold automatic
adjustment mechanism.
The downside of the above method is that the response time to the workload
hot spot changing may be much longer. For example,
- A previous cold memory area becomes hot
- The hint page fault will be triggered. But the hint page fault
latency isn't shorter than the hot threshold. So the pages will
not be promoted.
- When the memory area is scanned again, maybe after a scan period,
the hint page fault latency measured will be shorter than the hot
threshold and the pages will be promoted.
To mitigate this, if there are enough free space in the fast memory node,
the hot threshold will not be used, all pages will be promoted upon the
hint page fault for fast response.
Thanks Zhong Jiang reported and tested the fix for a bug when disabling
memory tiering mode dynamically.
Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: osalvador <osalvador@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kuyo reports that the pattern of using debugfs_remove(debugfs_lookup())
leaks a dentry and with a hotplug stress test, the machine eventually
runs out of memory.
Fix this up by using the newly created debugfs_lookup_and_remove() call
instead which properly handles the dentry reference counting logic.
Cc: Major Chen <major.chen@samsung.com>
Cc: stable <stable@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Reported-by: Kuyo Chang <kuyo.chang@mediatek.com>
Tested-by: Kuyo Chang <kuyo.chang@mediatek.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220902123107.109274-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steps on the way to 5.18-rc1
Resolves merge conflicts in:
kernel/sched/core.c
kernel/sched/cputime.c
kernel/sched/sched.h
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I5a1cc7ebbaf5f2fda5adf50a0bc7df9783633160
Collect all utility functionality source code files into a single kernel/sched/build_utility.c file,
via #include-ing the .c files:
kernel/sched/clock.c
kernel/sched/completion.c
kernel/sched/loadavg.c
kernel/sched/swait.c
kernel/sched/wait_bit.c
kernel/sched/wait.c
CONFIG_CPU_FREQ:
kernel/sched/cpufreq.c
CONFIG_CPU_FREQ_GOV_SCHEDUTIL:
kernel/sched/cpufreq_schedutil.c
CONFIG_CGROUP_CPUACCT:
kernel/sched/cpuacct.c
CONFIG_SCHED_DEBUG:
kernel/sched/debug.c
CONFIG_SCHEDSTATS:
kernel/sched/stats.c
CONFIG_SMP:
kernel/sched/cpupri.c
kernel/sched/stop_task.c
kernel/sched/topology.c
CONFIG_SCHED_CORE:
kernel/sched/core_sched.c
CONFIG_PSI:
kernel/sched/psi.c
CONFIG_MEMBARRIER:
kernel/sched/membarrier.c
CONFIG_CPU_ISOLATION:
kernel/sched/isolation.c
CONFIG_SCHED_AUTOGROUP:
kernel/sched/autogroup.c
The goal is to amortize the 60+ KLOC header bloat from over a dozen build units into
a single build unit.
The build time of build_utility.c also roughly matches the build time of core.c and
fair.c - allowing better load-balancing of scheduler-only rebuilds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
The older format of /proc/pid/sched printed home node info which
required the mempolicy and task lock around mpol_get(). However
the format has changed since then and there is no need for
sched_show_numa() any more to have mempolicy argument,
asssociated mpol_get/put and task_lock/unlock. Remove them.
Fixes: 397f2378f1 ("sched/numa: Fix numa balancing stats in /proc/pid/sched")
Signed-off-by: Bharata B Rao <bharata@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20220118050515.2973-1-bharata@amd.com
Adds accounting for "forced idle" time, which is time where a cookie'd
task forces its SMT sibling to idle, despite the presence of runnable
tasks.
Forced idle time is one means to measure the cost of enabling core
scheduling (ie. the capacity lost due to the need to force idle).
Forced idle time is attributed to the thread responsible for causing
the forced idle.
A few details:
- Forced idle time is displayed via /proc/PID/sched. It also requires
that schedstats is enabled.
- Forced idle is only accounted when a sibling hyperthread is held
idle despite the presence of runnable tasks. No time is charged if
a sibling is idle but has no runnable tasks.
- Tasks with 0 cookie are never charged forced idle.
- For SMT > 2, we scale the amount of forced idle charged based on the
number of forced idle siblings. Additionally, we split the time up and
evenly charge it to all running tasks, as each is equally responsible
for the forced idle.
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211018203428.2025792-1-joshdon@google.com
Steps on the way to 5.16-rc1.
Resolves merge conflicts in:
kernel/irq_work.c
kernel/sched/core.c
kernel/sched/fair.c
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I4b144ffba858a38a417e9d71d76c23d015b7aa9b
Export symbols needed to implement vendor scheduler value-adds to modify
sched features dynamically at runtime, such as disabling TTWU_QUEUE.
Bug: 177050087
Change-Id: Ibe14d2019403be68b7ceeee47425b2473ccb51fe
Signed-off-by: Shaleen Agrawal <shalagra@codeaurora.org>
When !SCHEDSTATS schedstat_enabled() is an unconditional 0 and the
whole block doesn't exist, however GCC figures the scoped variable
'stats' is unused and complains about it.
Upgrade the warning from -Wunused-variable to -Wunused-but-set-variable
by writing it in two statements. This fixes the build because the new
warning is in W=1.
Given that whole if(0) {} thing, I don't feel motivated to change
things overly much and quite strongly feel this is the compiler being
daft.
Fixes: cb3e971c435d ("sched: Make struct sched_statistics independent of fair sched class")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Currently in schedstats we have sum_sleep_runtime and iowait_sum, but
there's no metric to show how long the task is in D state. Once a task in
D state, it means the task is blocked in the kernel, for example the
task may be waiting for a mutex. The D state is more frequent than
iowait, and it is more critital than S state. So it is worth to add a
metric to measure it.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210905143547.4668-5-laoar.shao@gmail.com
If we want to use the schedstats facility to trace other sched classes, we
should make it independent of fair sched class. The struct sched_statistics
is the schedular statistics of a task_struct or a task_group. So we can
move it into struct task_struct and struct task_group to achieve the goal.
After the patch, schestats are orgnized as follows,
struct task_struct {
...
struct sched_entity se;
struct sched_rt_entity rt;
struct sched_dl_entity dl;
...
struct sched_statistics stats;
...
};
Regarding the task group, schedstats is only supported for fair group
sched, and a new struct sched_entity_stats is introduced, suggested by
Peter -
struct sched_entity_stats {
struct sched_entity se;
struct sched_statistics stats;
} __no_randomize_layout;
Then with the se in a task_group, we can easily get the stats.
The sched_statistics members may be frequently modified when schedstats is
enabled, in order to avoid impacting on random data which may in the same
cacheline with them, the struct sched_statistics is defined as cacheline
aligned.
As this patch changes the core struct of scheduler, so I verified the
performance it may impact on the scheduler with 'perf bench sched
pipe', suggested by Mel. Below is the result, in which all the values
are in usecs/op.
Before After
kernel.sched_schedstats=0 5.2~5.4 5.2~5.4
kernel.sched_schedstats=1 5.3~5.5 5.3~5.5
[These data is a little difference with the earlier version, that is
because my old test machine is destroyed so I have to use a new
different test machine.]
Almost no impact on the sched performance.
No functional change.
[lkp@intel.com: reported build failure in earlier version]
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20210905143547.4668-3-laoar.shao@gmail.com
Use a small, non-scaled min granularity for SCHED_IDLE entities, when
competing with normal entities. This reduces the latency of getting
a normal entity back on cpu, at the expense of increased context
switch frequency of SCHED_IDLE entities.
The benefit of this change is to reduce the round-robin latency for
normal entities when competing with a SCHED_IDLE entity.
Example: on a machine with HZ=1000, spawned two threads, one of which is
SCHED_IDLE, and affined to one cpu. Without this patch, the SCHED_IDLE
thread runs for 4ms then waits for 1.4s. With this patch, it runs for
1ms and waits 340ms (as it round-robins with the other thread).
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20210820010403.946838-4-joshdon@google.com
Adds cfs_rq->idle_nr_running, which accounts the number of idle entities
directly enqueued on the cfs_rq.
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20210820010403.946838-3-joshdon@google.com
Steps on the way to 5.15-rc1.
Resolves merge conflicts with:
kernel/fork.c
kernel/sched/core.c
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I73e7bfc310639dae4ca5df7b63d47fa32a171760
This extends SCHED_IDLE to cgroups.
Interface: cgroup/cpu.idle.
0: default behavior
1: SCHED_IDLE
Extending SCHED_IDLE to cgroups means that we incorporate the existing
aspects of SCHED_IDLE; a SCHED_IDLE cgroup will count all of its
descendant threads towards the idle_h_nr_running count of all of its
ancestor cgroups. Thus, sched_idle_rq() will work properly.
Additionally, SCHED_IDLE cgroups are configured with minimum weight.
There are two key differences between the per-task and per-cgroup
SCHED_IDLE interface:
- The cgroup interface allows tasks within a SCHED_IDLE hierarchy to
maintain their relative weights. The entity that is "idle" is the
cgroup, not the tasks themselves.
- Since the idle entity is the cgroup, our SCHED_IDLE wakeup preemption
decision is not made by comparing the current task with the woken
task, but rather by comparing their matching sched_entity.
A typical use-case for this is a user that creates an idle and a
non-idle subtree. The non-idle subtree will dominate competition vs
the idle subtree, but the idle subtree will still be high priority vs
other users on the system. The latter is accomplished via comparing
matching sched_entity in the waken preemption path (this could also be
improved by making the sched_idle_rq() decision dependent on the
perspective of a specific task).
For now, we maintain the existing SCHED_IDLE semantics. Future patches
may make improvements that extend how we treat SCHED_IDLE entities.
The per-task_group idle field is an integer that currently only holds
either a 0 or a 1. This is explicitly typed as an integer to allow for
further extensions to this API. For example, a negative value may
indicate a highly latency-sensitive cgroup that should be preferred
for preemption/placement/etc.
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20210730020019.1487127-2-joshdon@google.com
Since CPU capacity asymmetry can stem purely from maximum frequency
differences (e.g. Pixel 1), a rebuild of the scheduler topology can be
issued upon loading cpufreq, see:
arch_topology.c::init_cpu_capacity_callback()
Turns out that if this rebuild happens *before* sched_debug_init() is
run (which is a late initcall), we end up messing up the sched_domain debug
directory: passing a NULL parent to debugfs_create_dir() ends up creating
the directory at the debugfs root, which in this case creates
/sys/kernel/debug/domains (instead of /sys/kernel/debug/sched/domains).
This currently doesn't happen on asymmetric systems which use cpufreq-scpi
or cpufreq-dt drivers, as those are loaded via
deferred_probe_initcall() (it is also a late initcall, but appears to be
ordered *after* sched_debug_init()).
Ionela has been working on detecting maximum frequency asymmetry via ACPI,
and that actually happens via a *device* initcall, thus before
sched_debug_init(), and causes the aforementionned debugfs mayhem.
One option would be to punt sched_debug_init() down to
fs_initcall_sync(). Preventing update_sched_domain_debugfs() from running
before sched_debug_init() appears to be the safer option.
Fixes: 3b87f136f8 ("sched,debug: Convert sysctl sched_domains to debugfs")
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lore.kernel.org/r/20210514095339.12979-1-ionela.voinescu@arm.com
This commit in sched/urgent moved the cfs_rq_is_decayed() function:
a7b359fc6a: ("sched/fair: Correctly insert cfs_rq's to list on unthrottle")
and this fresh commit in sched/core modified it in the old location:
9e077b52d8: ("sched/pelt: Check that *_avg are null when *_sum are")
Merge the two variants.
Conflicts:
kernel/sched/fair.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The util_est internal UTIL_AVG_UNCHANGED flag which is used to prevent
unnecessary util_est updates uses the LSB of util_est.enqueued. It is
exposed via _task_util_est() (and task_util_est()).
Commit 92a801e5d5 ("sched/fair: Mask UTIL_AVG_UNCHANGED usages")
mentions that the LSB is lost for util_est resolution but
find_energy_efficient_cpu() checks if task_util_est() returns 0 to
return prev_cpu early.
_task_util_est() returns the max value of util_est.ewma and
util_est.enqueued or'ed w/ UTIL_AVG_UNCHANGED.
So task_util_est() returning the max of task_util() and
_task_util_est() will never return 0 under the default
SCHED_FEAT(UTIL_EST, true).
To fix this use the MSB of util_est.enqueued instead and keep the flag
util_est internal, i.e. don't export it via _task_util_est().
The maximal possible util_avg value for a task is 1024 so the MSB of
'unsigned int util_est.enqueued' isn't used to store a util value.
As a caveat the code behind the util_est_se trace point has to filter
UTIL_AVG_UNCHANGED to see the real util_est.enqueued value which should
be easy to do.
This also fixes an issue report by Xuewen Yan that util_est_update()
only used UTIL_AVG_UNCHANGED for the subtrahend of the equation:
last_enqueued_diff = ue.enqueued - (task_util() | UTIL_AVG_UNCHANGED)
Fixes: b89997aa88 sched/pelt: Fix task util_est update filtering
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Xuewen Yan <xuewen.yan@unisoc.com>
Reviewed-by: Vincent Donnefort <vincent.donnefort@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20210602145808.1562603-1-dietmar.eggemann@arm.com
In preparation of playing games with rq->lock, abstract the thing
using an accessor.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Don Hiatt <dhiatt@digitalocean.com>
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210422123308.136465446@infradead.org
The handling of sysrq key can be activated by echoing the key to
/proc/sysrq-trigger or via the magic key sequence typed into a terminal
that is connected to the system in some way (serial, USB or other mean).
In the former case, the handling is done in a user context. In the
latter case, it is likely to be in an interrupt context.
Currently in print_cpu() of kernel/sched/debug.c, sched_debug_lock is
taken with interrupt disabled for the whole duration of the calls to
print_*_stats() and print_rq() which could last for the quite some time
if the information dump happens on the serial console.
If the system has many cpus and the sched_debug_lock is somehow busy
(e.g. parallel sysrq-t), the system may hit a hard lockup panic
depending on the actually serial console implementation of the
system.
The purpose of sched_debug_lock is to serialize the use of the global
cgroup_path[] buffer in print_cpu(). The rests of the printk calls don't
need serialization from sched_debug_lock.
Calling printk() with interrupt disabled can still be problematic if
multiple instances are running. Allocating a stack buffer of PATH_MAX
bytes is not feasible because of the limited size of the kernel stack.
The solution implemented in this patch is to allow only one caller at a
time to use the full size group_path[], while other simultaneous callers
will have to use shorter stack buffers with the possibility of path
name truncation. A "..." suffix will be printed if truncation may have
happened. The cgroup path name is provided for informational purpose
only, so occasional path name truncation should not be a big problem.
Fixes: efe25c2c7b ("sched: Reinstate group names in /proc/sched_debug")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210415195426.6677-1-longman@redhat.com
CPU scheduler marks need_resched flag to signal a schedule() on a
particular CPU. But, schedule() may not happen immediately in cases
where the current task is executing in the kernel mode (no
preemption state) for extended periods of time.
This patch adds a warn_on if need_resched is pending for more than the
time specified in sysctl resched_latency_warn_ms. If it goes off, it is
likely that there is a missing cond_resched() somewhere. Monitoring is
done via the tick and the accuracy is hence limited to jiffy scale. This
also means that we won't trigger the warning if the tick is disabled.
This feature (LATENCY_WARN) is default disabled.
Signed-off-by: Paul Turner <pjt@google.com>
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210416212936.390566-1-joshdon@google.com
CONFIG_SCHED_DEBUG is the build-time Kconfig knob, the boot param
sched_debug and the /debug/sched/debug_enabled knobs control the
sched_debug_enabled variable, but what they really do is make
SCHED_DEBUG more verbose, so rename the lot.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Move the #ifdef SCHED_DEBUG bits to kernel/sched/debug.c in order to
collect all the debugfs bits.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210412102001.353833279@infradead.org
Stop polluting sysctl with undocumented knobs that really are debug
only, move them all to /debug/sched/ along with the existing
/debug/sched_* files that already exist.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210412102001.287610138@infradead.org
Fix ~42 single-word typos in scheduler code comments.
We have accumulated a few fun ones over the years. :-)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: linux-kernel@vger.kernel.org
Steps on the way to 5.12-rc1
Resolves conflicts in:
kernel/sched/cpufreq_schedutil.c
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I06d90f919467f3e7e8970aaedbb872a10eb699ff
Use the task_current() function where appropriate.
No functional change.
Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/20201030173223.GA52339@rlk
Export sched_feat_keys to check Sched feature is enabled or not
from vendor modules.
Bug: 173559623
Change-Id: Id03483149f39bfc3e3a18ea56736a84d824a53f7
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
Reading /proc/sys/kernel/sched_domain/cpu*/domain0/flags mutliple times
with small reads causes oopses with slub corruption issues because the kfree is
free'ing an offset from a previous allocation. Fix this by adding in a new
pointer 'buf' for the allocation and kfree and use the temporary pointer tmp
to handle memory copies of the buf offsets.
Fixes: 5b9f8ff7b3 ("sched/debug: Output SD flag names rather than their values")
Reported-by: Jeff Bastian <jbastian@redhat.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20201029151103.373410-1-colin.king@canonical.com
The last sd_flag_debug shuffle inadvertently moved its definition within
an #ifdef CONFIG_SYSCTL region. While CONFIG_SYSCTL is indeed required to
produce the sched domain ctl interface (which uses sd_flag_debug to output
flag names), it isn't required to run any assertion on the sched_domain
hierarchy itself.
Move the definition of sd_flag_debug to a CONFIG_SCHED_DEBUG region of
topology.c.
Now at long last we have:
- sd_flag_debug declared in include/linux/sched/topology.h iff
CONFIG_SCHED_DEBUG=y
- sd_flag_debug defined in kernel/sched/topology.c, conditioned by:
- CONFIG_SCHED_DEBUG, with an explicit #ifdef block
- CONFIG_SMP, as a requirement to compile topology.c
With this change, all symbols pertaining to SD flag metadata (with the
exception of __SD_FLAG_CNT) are now defined exclusively within topology.c
Fixes: 8fca9494d4 ("sched/topology: Move sd_flag_debug out of linux/sched/topology.h")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200908184956.23369-1-valentin.schneider@arm.com
Defining an array in a header imported all over the place clearly is a daft
idea, that still didn't stop me from doing it.
Leave a declaration of sd_flag_debug in topology.h and move its definition
to sched/debug.c.
Fixes: b6e862f386 ("sched/topology: Define and assign sched_domain flag metadata")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200825133216.9163-1-valentin.schneider@arm.com
Decoding the output of /proc/sys/kernel/sched_domain/cpu*/domain*/flags has
always been somewhat annoying, as one needs to go fetch the bit -> name
mapping from the source code itself. This encoding can be saved in a script
somewhere, but that isn't safe from flags being added, removed or even
shuffled around.
What matters for debugging purposes is to get *which* flags are set in a
given domain, their associated value is pretty much meaningless.
Make the sd flags debug file output flag names.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20200817113003.20802-7-valentin.schneider@arm.com
In preparation of removing rq->wake_list, replace the
!list_empty(rq->wake_list) with rq->ttwu_pending. This is not fully
equivalent as this new variable is racy.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200526161908.070399698@infradead.org
The intention of commit 96e74ebf8d ("sched/debug: Add task uclamp
values to SCHED_DEBUG procfs") was to print requested and effective
task uclamp values. The requested values printed are read from p->uclamp,
which holds the last effective values. Fix this by printing the values
from p->uclamp_req.
Fixes: 96e74ebf8d ("sched/debug: Add task uclamp values to SCHED_DEBUG procfs")
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/1589115401-26391-1-git-send-email-pkondeti@codeaurora.org
Writing to the sysctl of a sched_domain->flags directly updates the value of
the field, and goes nowhere near update_top_cache_domain(). This means that
the cached domain pointers can end up containing stale data (e.g. the
domain pointed to doesn't have the relevant flag set anymore).
Explicit domain walks that check for flags will be affected by
the write, but this won't be in sync with the cached pointers which will
still point to the domains that were cached at the last sched_domain
build.
In other words, writing to this interface is playing a dangerous game. It
could be made to trigger an update of the cached sched_domain pointers when
written to, but this does not seem to be worth the trouble. Make it
read-only.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200415210512.805-3-valentin.schneider@arm.com
Requested and effective uclamp values can be a bit tricky to decipher when
playing with cgroup hierarchies. Add them to a task's procfs when
SCHED_DEBUG is enabled.
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200226124543.31986-4-valentin.schneider@arm.com
The printing macros in debug.c keep redefining the same output
format. Collect each output format in a single definition, and reuse that
definition in the other macros. While at it, add a layer of parentheses and
replace printf's with the newly introduced macros.
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200226124543.31986-3-valentin.schneider@arm.com
Most printing macros for procfs are defined globally in debug.c, and they
are re-defined (to the exact same thing) within proc_sched_show_task().
Get rid of the duplicate defines.
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200226124543.31986-2-valentin.schneider@arm.com
