Export symbol of the function wq_worker_comm() in kernel/workqueue.c for dlkm to get the description of the kworker process. It is used to get the description when kworker thread happened abnormal situation.
Bug: 208394207
Signed-off-by: zhengding chen <chenzhengding@oppo.com>
Change-Id: I2e7ddd52a15e22e99e6596f16be08243af1bb473
(cherry picked from commit 28de74186185e339123c86984729818d0d2d7f43)
(cherry picked from commit 87e0e98c25ba8e121975708943335e3abad651d9)
(cherry picked from commit 38a713dc80959bd855580a51b75654fb6fe9a5dd)
Changes in 6.1.16
HID: asus: use spinlock to protect concurrent accesses
HID: asus: use spinlock to safely schedule workers
powerpc/mm: Rearrange if-else block to avoid clang warning
ata: ahci: Revert "ata: ahci: Add Tiger Lake UP{3,4} AHCI controller"
ARM: OMAP2+: Fix memory leak in realtime_counter_init()
arm64: dts: qcom: qcs404: use symbol names for PCIe resets
arm64: dts: qcom: msm8996-tone: Fix USB taking 6 minutes to wake up
arm64: dts: qcom: sm8150-kumano: Panel framebuffer is 2.5k instead of 4k
arm64: dts: qcom: sm6350: Fix up the ramoops node
arm64: dts: qcom: sm6125: Reorder HSUSB PHY clocks to match bindings
arm64: dts: qcom: sm6125-seine: Clean up gpio-keys (volume down)
arm64: dts: imx8m: Align SoC unique ID node unit address
ARM: zynq: Fix refcount leak in zynq_early_slcr_init
arm64: dts: mediatek: mt8195: Add power domain to U3PHY1 T-PHY
arm64: dts: mediatek: mt8183: Fix systimer 13 MHz clock description
arm64: dts: mediatek: mt8192: Fix systimer 13 MHz clock description
arm64: dts: mediatek: mt8195: Fix systimer 13 MHz clock description
arm64: dts: mediatek: mt8186: Fix systimer 13 MHz clock description
arm64: dts: qcom: sdm845-db845c: fix audio codec interrupt pin name
x86/acpi/boot: Do not register processors that cannot be onlined for x2APIC
arm64: dts: qcom: sc7180: correct SPMI bus address cells
arm64: dts: qcom: sc7280: correct SPMI bus address cells
arm64: dts: qcom: sc8280xp: correct SPMI bus address cells
arm64: dts: qcom: sc8280xp: Vote for CX in USB controllers
arm64: dts: meson-gxl: jethub-j80: Fix WiFi MAC address node
arm64: dts: meson-gxl: jethub-j80: Fix Bluetooth MAC node name
arm64: dts: meson-axg: jethub-j1xx: Fix MAC address node names
arm64: dts: meson-gx: Fix Ethernet MAC address unit name
arm64: dts: meson-g12a: Fix internal Ethernet PHY unit name
arm64: dts: meson-gx: Fix the SCPI DVFS node name and unit address
cpuidle, intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE *again*
arm64: dts: ti: k3-am62: Enable SPI nodes at the board level
arm64: dts: ti: k3-am62-main: Fix clocks for McSPI
arm64: tegra: Fix duplicate regulator on Jetson TX1
arm64: dts: msm8992-bullhead: add memory hole region
arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem size
arm64: dts: qcom: msm8992-bullhead: Disable dfps_data_mem
arm64: dts: qcom: ipq8074: correct USB3 QMP PHY-s clock output names
arm64: dts: qcom: ipq8074: fix Gen2 PCIe QMP PHY
arm64: dts: qcom: ipq8074: fix Gen3 PCIe QMP PHY
arm64: dts: qcom: ipq8074: correct Gen2 PCIe ranges
arm64: dts: qcom: ipq8074: fix Gen3 PCIe node
arm64: dts: qcom: ipq8074: correct PCIe QMP PHY output clock names
arm64: dts: meson: remove CPU opps below 1GHz for G12A boards
ARM: OMAP1: call platform_device_put() in error case in omap1_dm_timer_init()
arm64: dts: mediatek: mt8192: Mark scp_adsp clock as broken
ARM: bcm2835_defconfig: Enable the framebuffer
ARM: s3c: fix s3c64xx_set_timer_source prototype
arm64: dts: ti: k3-j7200: Fix wakeup pinmux range
ARM: dts: exynos: correct wr-active property in Exynos3250 Rinato
ARM: imx: Call ida_simple_remove() for ida_simple_get
arm64: dts: amlogic: meson-gx: fix SCPI clock dvfs node name
arm64: dts: amlogic: meson-axg: fix SCPI clock dvfs node name
arm64: dts: amlogic: meson-gx: add missing SCPI sensors compatible
arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix supply name of USB controller node
arm64: dts: amlogic: meson-gxl-s905d-sml5442tw: drop invalid clock-names property
arm64: dts: amlogic: meson-gx: add missing unit address to rng node name
arm64: dts: amlogic: meson-gxl-s905w-jethome-jethub-j80: fix invalid rtc node name
arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix invalid rtc node name
arm64: dts: amlogic: meson-gxl: add missing unit address to eth-phy-mux node name
arm64: dts: amlogic: meson-gx-libretech-pc: fix update button name
arm64: dts: amlogic: meson-sm1-bananapi-m5: fix adc keys node names
arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name
arm64: dts: amlogic: meson-gxbb-kii-pro: fix led node name
arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip
locking/rwsem: Disable preemption in all down_read*() and up_read() code paths
arm64: dts: renesas: beacon-renesom: Fix gpio expander reference
arm64: dts: meson: radxa-zero: allow usb otg mode
arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN
ARM: dts: sun8i: nanopi-duo2: Fix regulator GPIO reference
ublk_drv: remove nr_aborted_queues from ublk_device
ublk_drv: don't probe partitions if the ubq daemon isn't trusted
ARM: dts: imx7s: correct iomuxc gpr mux controller cells
sbitmap: remove redundant check in __sbitmap_queue_get_batch
sbitmap: Use single per-bitmap counting to wake up queued tags
sbitmap: correct wake_batch recalculation to avoid potential IO hung
arm64: dts: mt8195: Fix CPU map for single-cluster SoC
arm64: dts: mt8192: Fix CPU map for single-cluster SoC
arm64: dts: mt8186: Fix CPU map for single-cluster SoC
arm64: dts: mediatek: mt7622: Add missing pwm-cells to pwm node
arm64: dts: mediatek: mt8186: Fix watchdog compatible
arm64: dts: mediatek: mt8195: Fix watchdog compatible
arm64: dts: mediatek: mt7986: Fix watchdog compatible
ARM: dts: stm32: Update part number NVMEM description on stm32mp131
blk-mq: avoid sleep in blk_mq_alloc_request_hctx
blk-mq: remove stale comment for blk_mq_sched_mark_restart_hctx
blk-mq: wait on correct sbitmap_queue in blk_mq_mark_tag_wait
blk-mq: Fix potential io hung for shared sbitmap per tagset
blk-mq: correct stale comment of .get_budget
arm64: dts: qcom: msm8996: support using GPLL0 as kryocc input
arm64: dts: qcom: msm8996 switch from RPM_SMD_BB_CLK1 to RPM_SMD_XO_CLK_SRC
arm64: dts: qcom: sm8350: drop incorrect cells from serial
arm64: dts: qcom: sm8450: drop incorrect cells from serial
arm64: dts: qcom: msm8992-lg-bullhead: Correct memory overlaps with the SMEM and MPSS memory regions
arm64: dts: qcom: msm8953: correct TLMM gpio-ranges
arm64: dts: qcom: msm8992-*: Fix up comments
arm64: dts: qcom: msm8992-lg-bullhead: Enable regulators
s390/dasd: Fix potential memleak in dasd_eckd_init()
sched/rt: pick_next_rt_entity(): check list_entry
perf/x86/intel/ds: Fix the conversion from TSC to perf time
x86/perf/zhaoxin: Add stepping check for ZXC
KEYS: asymmetric: Fix ECDSA use via keyctl uapi
block: ublk: check IO buffer based on flag need_get_data
arm64: dts: qcom: pmk8350: Specify PBS register for PON
arm64: dts: qcom: pmk8350: Use the correct PON compatible
erofs: relinquish volume with mutex held
block: sync mixed merged request's failfast with 1st bio's
block: Fix io statistics for cgroup in throttle path
block: bio-integrity: Copy flags when bio_integrity_payload is cloned
block: use proper return value from bio_failfast()
wifi: mt76: mt7915: add missing of_node_put()
wifi: mt76: mt7921s: fix slab-out-of-bounds access in sdio host
wifi: mt76: mt7915: check return value before accessing free_block_num
wifi: mt76: mt7915: drop always true condition of __mt7915_reg_addr()
wifi: mt76: mt7915: fix unintended sign extension of mt7915_hw_queue_read()
wifi: mt76: fix coverity uninit_use_in_call in mt76_connac2_reverse_frag0_hdr_trans()
wifi: rsi: Fix memory leak in rsi_coex_attach()
wifi: rtlwifi: rtl8821ae: don't call kfree_skb() under spin_lock_irqsave()
wifi: rtlwifi: rtl8188ee: don't call kfree_skb() under spin_lock_irqsave()
wifi: rtlwifi: rtl8723be: don't call kfree_skb() under spin_lock_irqsave()
wifi: iwlegacy: common: don't call dev_kfree_skb() under spin_lock_irqsave()
wifi: libertas: fix memory leak in lbs_init_adapter()
wifi: rtl8xxxu: don't call dev_kfree_skb() under spin_lock_irqsave()
wifi: rtw89: 8852c: rfk: correct DACK setting
wifi: rtw89: 8852c: rfk: correct DPK settings
wifi: rtlwifi: Fix global-out-of-bounds bug in _rtl8812ae_phy_set_txpower_limit()
libbpf: Fix btf__align_of() by taking into account field offsets
wifi: ipw2x00: don't call dev_kfree_skb() under spin_lock_irqsave()
wifi: ipw2200: fix memory leak in ipw_wdev_init()
wifi: wilc1000: fix potential memory leak in wilc_mac_xmit()
wifi: wilc1000: add missing unregister_netdev() in wilc_netdev_ifc_init()
wifi: brcmfmac: fix potential memory leak in brcmf_netdev_start_xmit()
wifi: brcmfmac: unmap dma buffer in brcmf_msgbuf_alloc_pktid()
wifi: libertas_tf: don't call kfree_skb() under spin_lock_irqsave()
wifi: libertas: if_usb: don't call kfree_skb() under spin_lock_irqsave()
wifi: libertas: main: don't call kfree_skb() under spin_lock_irqsave()
wifi: libertas: cmdresp: don't call kfree_skb() under spin_lock_irqsave()
wifi: wl3501_cs: don't call kfree_skb() under spin_lock_irqsave()
libbpf: Fix invalid return address register in s390
crypto: x86/ghash - fix unaligned access in ghash_setkey()
ACPICA: Drop port I/O validation for some regions
genirq: Fix the return type of kstat_cpu_irqs_sum()
rcu-tasks: Improve comments explaining tasks_rcu_exit_srcu purpose
rcu-tasks: Remove preemption disablement around srcu_read_[un]lock() calls
rcu-tasks: Fix synchronize_rcu_tasks() VS zap_pid_ns_processes()
lib/mpi: Fix buffer overrun when SG is too long
crypto: ccp - Avoid page allocation failure warning for SEV_GET_ID2
platform/chrome: cros_ec_typec: Update port DP VDO
ACPICA: nsrepair: handle cases without a return value correctly
selftests/xsk: print correct payload for packet dump
selftests/xsk: print correct error codes when exiting
arm64/cpufeature: Fix field sign for DIT hwcap detection
kselftest/arm64: Fix syscall-abi for systems without 128 bit SME
workqueue: Protects wq_unbound_cpumask with wq_pool_attach_mutex
s390/early: fix sclp_early_sccb variable lifetime
s390/vfio-ap: fix an error handling path in vfio_ap_mdev_probe_queue()
x86/signal: Fix the value returned by strict_sas_size()
thermal/drivers/tsens: Drop msm8976-specific defines
thermal/drivers/tsens: Sort out msm8976 vs msm8956 data
thermal/drivers/tsens: fix slope values for msm8939
thermal/drivers/tsens: limit num_sensors to 9 for msm8939
wifi: rtw89: fix potential leak in rtw89_append_probe_req_ie()
wifi: rtw89: Add missing check for alloc_workqueue
wifi: rtl8xxxu: Fix memory leaks with RTL8723BU, RTL8192EU
wifi: orinoco: check return value of hermes_write_wordrec()
thermal/drivers/imx_sc_thermal: Drop empty platform remove function
thermal/drivers/imx_sc_thermal: Fix the loop condition
wifi: ath9k: htc_hst: free skb in ath9k_htc_rx_msg() if there is no callback function
wifi: ath9k: hif_usb: clean up skbs if ath9k_hif_usb_rx_stream() fails
wifi: ath9k: Fix potential stack-out-of-bounds write in ath9k_wmi_rsp_callback()
wifi: ath11k: Fix memory leak in ath11k_peer_rx_frag_setup
wifi: cfg80211: Fix extended KCK key length check in nl80211_set_rekey_data()
ACPI: battery: Fix missing NUL-termination with large strings
selftests/bpf: Fix build errors if CONFIG_NF_CONNTRACK=m
crypto: ccp - Failure on re-initialization due to duplicate sysfs filename
crypto: essiv - Handle EBUSY correctly
crypto: seqiv - Handle EBUSY correctly
powercap: fix possible name leak in powercap_register_zone()
x86/microcode: Add a parameter to microcode_check() to store CPU capabilities
x86/microcode: Check CPU capabilities after late microcode update correctly
x86/microcode: Adjust late loading result reporting message
selftests/bpf: Use consistent build-id type for liburandom_read.so
selftests/bpf: Fix vmtest static compilation error
crypto: xts - Handle EBUSY correctly
leds: led-class: Add missing put_device() to led_put()
s390/bpf: Add expoline to tail calls
wifi: iwlwifi: mei: fix compilation errors in rfkill()
kselftest/arm64: Fix enumeration of systems without 128 bit SME
can: rcar_canfd: Fix R-Car V3U GAFLCFG field accesses
selftests/bpf: Initialize tc in xdp_synproxy
crypto: ccp - Flush the SEV-ES TMR memory before giving it to firmware
bpftool: profile online CPUs instead of possible
wifi: mt76: mt7915: call mt7915_mcu_set_thermal_throttling() only after init_work
wifi: mt76: mt7915: fix memory leak in mt7915_mcu_exit
wifi: mt76: mt7915: fix WED TxS reporting
wifi: mt76: add memory barrier to SDIO queue kick
wifi: mt76: mt7921: fix error code of return in mt7921_acpi_read
net/mlx5: Enhance debug print in page allocation failure
irqchip: Fix refcount leak in platform_irqchip_probe
irqchip/alpine-msi: Fix refcount leak in alpine_msix_init_domains
irqchip/irq-mvebu-gicp: Fix refcount leak in mvebu_gicp_probe
irqchip/ti-sci: Fix refcount leak in ti_sci_intr_irq_domain_probe
s390/mem_detect: fix detect_memory() error handling
s390/vmem: fix empty page tables cleanup under KASAN
s390/boot: cleanup decompressor header files
s390/mem_detect: rely on diag260() if sclp_early_get_memsize() fails
s390/boot: fix mem_detect extended area allocation
net: add sock_init_data_uid()
tun: tun_chr_open(): correctly initialize socket uid
tap: tap_open(): correctly initialize socket uid
OPP: fix error checking in opp_migrate_dentry()
cpufreq: davinci: Fix clk use after free
Bluetooth: hci_conn: Refactor hci_bind_bis() since it always succeeds
Bluetooth: L2CAP: Fix potential user-after-free
Bluetooth: hci_qca: get wakeup status from serdev device handle
net: ipa: generic command param fix
s390: vfio-ap: tighten the NIB validity check
s390/ap: fix status returned by ap_aqic()
s390/ap: fix status returned by ap_qact()
libbpf: Fix alen calculation in libbpf_nla_dump_errormsg()
xen/grant-dma-iommu: Implement a dummy probe_device() callback
rds: rds_rm_zerocopy_callback() correct order for list_add_tail()
crypto: rsa-pkcs1pad - Use akcipher_request_complete
m68k: /proc/hardware should depend on PROC_FS
RISC-V: time: initialize hrtimer based broadcast clock event device
clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use
wifi: iwl3945: Add missing check for create_singlethread_workqueue
wifi: iwl4965: Add missing check for create_singlethread_workqueue()
wifi: mwifiex: fix loop iterator in mwifiex_update_ampdu_txwinsize()
selftests/bpf: Fix out-of-srctree build
ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models
ACPI: resource: Do IRQ override on all TongFang GMxRGxx
crypto: octeontx2 - Fix objects shared between several modules
crypto: crypto4xx - Call dma_unmap_page when done
wifi: mac80211: move color collision detection report in a delayed work
wifi: mac80211: make rate u32 in sta_set_rate_info_rx()
wifi: mac80211: fix non-MLO station association
wifi: mac80211: Don't translate MLD addresses for multicast
wifi: mac80211: avoid u32_encode_bits() warning
wifi: mac80211: fix off-by-one link setting
tools/lib/thermal: Fix thermal_sampling_exit()
thermal/drivers/hisi: Drop second sensor hi3660
selftests/bpf: Fix map_kptr test.
wifi: mac80211: pass 'sta' to ieee80211_rx_data_set_sta()
bpf: Zeroing allocated object from slab in bpf memory allocator
selftests/bpf: Fix xdp_do_redirect on s390x
can: esd_usb: Move mislocated storage of SJA1000_ECC_SEG bits in case of a bus error
can: esd_usb: Make use of can_change_state() and relocate checking skb for NULL
xsk: check IFF_UP earlier in Tx path
LoongArch, bpf: Use 4 instructions for function address in JIT
bpf: Fix global subprog context argument resolution logic
irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts
irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts
net/smc: fix potential panic dues to unprotected smc_llc_srv_add_link()
net/smc: fix application data exception
selftests/net: Interpret UDP_GRO cmsg data as an int value
l2tp: Avoid possible recursive deadlock in l2tp_tunnel_register()
net: bcmgenet: fix MoCA LED control
net: lan966x: Fix possible deadlock inside PTP
net/mlx4_en: Introduce flexible array to silence overflow warning
selftest: fib_tests: Always cleanup before exit
sefltests: netdevsim: wait for devlink instance after netns removal
drm: Fix potential null-ptr-deref due to drmm_mode_config_init()
drm/fourcc: Add missing big-endian XRGB1555 and RGB565 formats
drm/bridge: ti-sn65dsi83: Fix delay after reset deassert to match spec
drm: mxsfb: DRM_IMX_LCDIF should depend on ARCH_MXC
drm: mxsfb: DRM_MXSFB should depend on ARCH_MXS || ARCH_MXC
drm/bridge: megachips: Fix error handling in i2c_register_driver()
drm/vkms: Fix memory leak in vkms_init()
drm/vkms: Fix null-ptr-deref in vkms_release()
drm/vc4: dpi: Fix format mapping for RGB565
drm: tidss: Fix pixel format definition
gpu: ipu-v3: common: Add of_node_put() for reference returned by of_graph_get_port_by_id()
drm/vc4: drop all currently held locks if deadlock happens
hwmon: (ftsteutates) Fix scaling of measurements
drm/msm/dpu: check for null return of devm_kzalloc() in dpu_writeback_init()
drm/msm/hdmi: Add missing check for alloc_ordered_workqueue
pinctrl: qcom: pinctrl-msm8976: Correct function names for wcss pins
pinctrl: stm32: Fix refcount leak in stm32_pctrl_get_irq_domain
pinctrl: rockchip: Fix refcount leak in rockchip_pinctrl_parse_groups
drm/vc4: hvs: Set AXI panic modes
drm/vc4: hvs: SCALER_DISPBKGND_AUTOHS is only valid on HVS4
drm/vc4: hvs: Correct interrupt masking bit assignment for HVS5
drm/vc4: hvs: Fix colour order for xRGB1555 on HVS5
drm/vc4: hdmi: Correct interlaced timings again
drm/msm: clean event_thread->worker in case of an error
drm/panel-edp: fix name for IVO product id 854b
scsi: qla2xxx: Fix exchange oversubscription
scsi: qla2xxx: Fix exchange oversubscription for management commands
scsi: qla2xxx: edif: Fix clang warning
ASoC: fsl_sai: initialize is_dsp_mode flag
drm/bridge: tc358767: Set default CLRSIPO count
drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup()
ALSA: hda/ca0132: minor fix for allocation size
drm/amdgpu: Use the sched from entity for amdgpu_cs trace
drm/msm/gem: Add check for kmalloc
drm/msm/dpu: Disallow unallocated resources to be returned
drm/bridge: lt9611: fix sleep mode setup
drm/bridge: lt9611: fix HPD reenablement
drm/bridge: lt9611: fix polarity programming
drm/bridge: lt9611: fix programming of video modes
drm/bridge: lt9611: fix clock calculation
drm/bridge: lt9611: pass a pointer to the of node
regulator: tps65219: use IS_ERR() to detect an error pointer
drm/mipi-dsi: Fix byte order of 16-bit DCS set/get brightness
drm: exynos: dsi: Fix MIPI_DSI*_NO_* mode flags
drm/msm/dsi: Allow 2 CTRLs on v2.5.0
scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096
drm/msm/dpu: sc7180: add missing WB2 clock control
drm/msm: use strscpy instead of strncpy
drm/msm/dpu: Add check for cstate
drm/msm/dpu: Add check for pstates
drm/msm/mdp5: Add check for kzalloc
habanalabs: bugs fixes in timestamps buff alloc
pinctrl: bcm2835: Remove of_node_put() in bcm2835_of_gpio_ranges_fallback()
pinctrl: mediatek: Initialize variable pullen and pullup to zero
pinctrl: mediatek: Initialize variable *buf to zero
gpu: host1x: Fix mask for syncpoint increment register
gpu: host1x: Don't skip assigning syncpoints to channels
drm/tegra: firewall: Check for is_addr_reg existence in IMM check
pinctrl: renesas: rzg2l: Fix configuring the GPIO pins as interrupts
drm/msm/dpu: set pdpu->is_rt_pipe early in dpu_plane_sspp_atomic_update()
drm/mediatek: dsi: Reduce the time of dsi from LP11 to sending cmd
drm/mediatek: Use NULL instead of 0 for NULL pointer
drm/mediatek: Drop unbalanced obj unref
drm/mediatek: mtk_drm_crtc: Add checks for devm_kcalloc
drm/mediatek: Clean dangling pointer on bind error path
ASoC: soc-compress.c: fixup private_data on snd_soc_new_compress()
dt-bindings: display: mediatek: Fix the fallback for mediatek,mt8186-disp-ccorr
gpio: vf610: connect GPIO label to dev name
ASoC: topology: Properly access value coming from topology file
spi: dw_bt1: fix MUX_MMIO dependencies
ASoC: mchp-spdifrx: fix controls which rely on rsr register
ASoC: mchp-spdifrx: fix return value in case completion times out
ASoC: mchp-spdifrx: fix controls that works with completion mechanism
ASoC: mchp-spdifrx: disable all interrupts in mchp_spdifrx_dai_remove()
dm: improve shrinker debug names
regmap: apply reg_base and reg_downshift for single register ops
ASoC: rsnd: fixup #endif position
ASoC: mchp-spdifrx: Fix uninitialized use of mr in mchp_spdifrx_hw_params()
ASoC: dt-bindings: meson: fix gx-card codec node regex
regulator: tps65219: use generic set_bypass()
hwmon: (asus-ec-sensors) add missing mutex path
hwmon: (ltc2945) Handle error case in ltc2945_value_store
ALSA: hda: Fix the control element identification for multiple codecs
drm/amdgpu: fix enum odm_combine_mode mismatch
scsi: mpt3sas: Fix a memory leak
scsi: aic94xx: Add missing check for dma_map_single()
HID: multitouch: Add quirks for flipped axes
HID: retain initial quirks set up when creating HID devices
ASoC: qcom: q6apm-lpass-dai: unprepare stream if its already prepared
ASoC: qcom: q6apm-dai: fix race condition while updating the position pointer
ASoC: qcom: q6apm-dai: Add SNDRV_PCM_INFO_BATCH flag
ASoC: codecs: lpass: register mclk after runtime pm
ASoC: codecs: lpass: fix incorrect mclk rate
drm/amd/display: don't call dc_interrupt_set() for disabled crtcs
HID: logitech-hidpp: Hard-code HID++ 1.0 fast scroll support
spi: bcm63xx-hsspi: Fix multi-bit mode setting
hwmon: (mlxreg-fan) Return zero speed for broken fan
ASoC: tlv320adcx140: fix 'ti,gpio-config' DT property init
dm: remove flush_scheduled_work() during local_exit()
nfs4trace: fix state manager flag printing
NFS: fix disabling of swap
spi: synquacer: Fix timeout handling in synquacer_spi_transfer_one()
ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared
HID: bigben: use spinlock to protect concurrent accesses
HID: bigben_worker() remove unneeded check on report_field
HID: bigben: use spinlock to safely schedule workers
hid: bigben_probe(): validate report count
ALSA: hda/hdmi: Register with vga_switcheroo on Dual GPU Macbooks
drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()
NFSD: enhance inter-server copy cleanup
NFSD: fix leaked reference count of nfsd4_ssc_umount_item
nfsd: fix race to check ls_layouts
nfsd: clean up potential nfsd_file refcount leaks in COPY codepath
NFSD: fix problems with cleanup on errors in nfsd4_copy
nfsd: fix courtesy client with deny mode handling in nfs4_upgrade_open
nfsd: don't fsync nfsd_files on last close
NFSD: copy the whole verifier in nfsd_copy_write_verifier
cifs: Fix lost destroy smbd connection when MR allocate failed
cifs: Fix warning and UAF when destroy the MR list
cifs: use tcon allocation functions even for dummy tcon
gfs2: jdata writepage fix
perf llvm: Fix inadvertent file creation
leds: led-core: Fix refcount leak in of_led_get()
leds: is31fl319x: Wrap mutex_destroy() for devm_add_action_or_rest()
leds: simatic-ipc-leds-gpio: Make sure we have the GPIO providing driver
tools/tracing/rtla: osnoise_hist: use total duration for average calculation
perf inject: Use perf_data__read() for auxtrace
perf intel-pt: Do not try to queue auxtrace data on pipe
perf test bpf: Skip test if kernel-debuginfo is not present
perf tools: Fix auto-complete on aarch64
sparc: allow PM configs for sparc32 COMPILE_TEST
selftests: find echo binary to use -ne options
selftests/ftrace: Fix bash specific "==" operator
selftests: use printf instead of echo -ne
perf record: Fix segfault with --overwrite and --max-size
printf: fix errname.c list
perf tests stat_all_metrics: Change true workload to sleep workload for system wide check
objtool: add UACCESS exceptions for __tsan_volatile_read/write
mfd: cs5535: Don't build on UML
mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()
dmaengine: idxd: Set traffic class values in GRPCFG on DSA 2.0
RDMA/erdma: Fix refcount leak in erdma_mmap
dmaengine: HISI_DMA should depend on ARCH_HISI
RDMA/hns: Fix refcount leak in hns_roce_mmap
iio: light: tsl2563: Do not hardcode interrupt trigger type
usb: gadget: fusb300_udc: free irq on the error path in fusb300_probe()
i2c: designware: fix i2c_dw_clk_rate() return size to be u32
soundwire: cadence: Don't overflow the command FIFOs
driver core: fix potential null-ptr-deref in device_add()
kobject: modify kobject_get_path() to take a const *
kobject: Fix slab-out-of-bounds in fill_kobj_path()
alpha/boot/tools/objstrip: fix the check for ELF header
media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()
media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENU
media: uvcvideo: Refactor uvc_ctrl_mappings_uvcXX
media: uvcvideo: Refactor power_line_frequency_controls_limited
coresight: etm4x: Fix accesses to TRCSEQRSTEVR and TRCSEQSTR
coresight: cti: Prevent negative values of enable count
coresight: cti: Add PM runtime call in enable_store
usb: typec: intel_pmc_mux: Don't leak the ACPI device reference count
PCI/IOV: Enlarge virtfn sysfs name buffer
PCI: switchtec: Return -EFAULT for copy_to_user() errors
PCI: endpoint: pci-epf-vntb: Clean up kernel_doc warning
PCI: endpoint: pci-epf-vntb: Add epf_ntb_mw_bar_clear() num_mws kernel-doc
hwtracing: hisi_ptt: Only add the supported devices to the filters list
tty: serial: fsl_lpuart: disable Rx/Tx DMA in lpuart32_shutdown()
tty: serial: fsl_lpuart: clear LPUART Status Register in lpuart32_shutdown()
serial: tegra: Add missing clk_disable_unprepare() in tegra_uart_hw_init()
Revert "char: pcmcia: cm4000_cs: Replace mdelay with usleep_range in set_protocol"
eeprom: idt_89hpesx: Fix error handling in idt_init()
applicom: Fix PCI device refcount leak in applicom_init()
firmware: stratix10-svc: add missing gen_pool_destroy() in stratix10_svc_drv_probe()
firmware: stratix10-svc: fix error handle while alloc/add device failed
VMCI: check context->notify_page after call to get_user_pages_fast() to avoid GPF
mei: pxp: Use correct macros to initialize uuid_le
misc/mei/hdcp: Use correct macros to initialize uuid_le
misc: fastrpc: Fix an error handling path in fastrpc_rpmsg_probe()
driver core: fix resource leak in device_add()
driver core: location: Free struct acpi_pld_info *pld before return false
drivers: base: transport_class: fix possible memory leak
drivers: base: transport_class: fix resource leak when transport_add_device() fails
firmware: dmi-sysfs: Fix null-ptr-deref in dmi_sysfs_register_handle
fotg210-udc: Add missing completion handler
dmaengine: dw-edma: Fix missing src/dst address of interleaved xfers
fpga: microchip-spi: move SPI I/O buffers out of stack
fpga: microchip-spi: rewrite status polling in a time measurable way
usb: early: xhci-dbc: Fix a potential out-of-bound memory access
tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma case
RDMA/cxgb4: add null-ptr-check after ip_dev_find()
usb: musb: mediatek: don't unregister something that wasn't registered
usb: gadget: configfs: Restrict symlink creation is UDC already binded
phy: mediatek: remove temporary variable @mask_
PCI: mt7621: Delay phy ports initialization
iommu: dart: Add suspend/resume support
iommu: dart: Support >64 stream IDs
iommu/dart: Fix apple_dart_device_group for PCI groups
iommu/vt-d: Set No Execute Enable bit in PASID table entry
power: supply: remove faulty cooling logic
RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish()
usb: max-3421: Fix setting of I/O pins
RDMA/irdma: Cap MSIX used to online CPUs + 1
serial: fsl_lpuart: fix RS485 RTS polariy inverse issue
tty: serial: imx: Handle RS485 DE signal active high
tty: serial: imx: disable Ageing Timer interrupt request irq
driver core: fw_devlink: Add DL_FLAG_CYCLE support to device links
driver core: fw_devlink: Don't purge child fwnode's consumer links
driver core: fw_devlink: Allow marking a fwnode link as being part of a cycle
driver core: fw_devlink: Consolidate device link flag computation
driver core: fw_devlink: Improve check for fwnode with no device/driver
driver core: fw_devlink: Make cycle detection more robust
mtd: mtdpart: Don't create platform device that'll never probe
usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
dmaengine: dw-edma: Fix readq_ch() return value truncation
PCI: Fix dropping valid root bus resources with .end = zero
phy: rockchip-typec: fix tcphy_get_mode error case
PCI: qcom: Fix host-init error handling
iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry()
iommu: Fix error unwind in iommu_group_alloc()
iommu/amd: Do not identity map v2 capable device when snp is enabled
dmaengine: sf-pdma: pdma_desc memory leak fix
dmaengine: dw-axi-dmac: Do not dereference NULL structure
dmaengine: ptdma: check for null desc before calling pt_cmd_callback
iommu/vt-d: Fix error handling in sva enable/disable paths
iommu/vt-d: Allow to use flush-queue when first level is default
RDMA/rxe: cleanup some error handling in rxe_verbs.c
RDMA/rxe: Fix missing memory barriers in rxe_queue.h
IB/hfi1: Fix math bugs in hfi1_can_pin_pages()
IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors
Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use"
remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers
media: ti: cal: fix possible memory leak in cal_ctx_create()
media: platform: ti: Add missing check for devm_regulator_get
media: imx: imx7-media-csi: fix missing clk_disable_unprepare() in imx7_csi_init()
powerpc: Remove linker flag from KBUILD_AFLAGS
s390/vdso: Drop '-shared' from KBUILD_CFLAGS_64
builddeb: clean generated package content
media: max9286: Fix memleak in max9286_v4l2_register()
media: ov2740: Fix memleak in ov2740_init_controls()
media: ov5675: Fix memleak in ov5675_init_controls()
media: ov5640: Fix soft reset sequence and timings
media: ov5640: Handle delays when no reset_gpio set
media: mc: Get media_device directly from pad
media: i2c: ov772x: Fix memleak in ov772x_probe()
media: i2c: imx219: Split common registers from mode tables
media: i2c: imx219: Fix binning for RAW8 capture
media: platform: mtk-mdp3: Fix return value check in mdp_probe()
media: camss: csiphy-3ph: avoid undefined behavior
media: platform: mtk-mdp3: remove unused VIDEO_MEDIATEK_VPU config
media: platform: mtk-mdp3: fix Kconfig dependencies
media: v4l2-jpeg: correct the skip count in jpeg_parse_app14_data
media: v4l2-jpeg: ignore the unknown APP14 marker
media: hantro: Fix JPEG encoder ENUM_FRMSIZE on RK3399
media: imx-jpeg: Apply clk_bulk api instead of operating specific clk
media: amphion: correct the unspecified color space
media: drivers/media/v4l2-core/v4l2-h264 : add detection of null pointers
media: rc: Fix use-after-free bugs caused by ene_tx_irqsim()
media: atomisp: Only set default_run_mode on first open of a stream/asd
media: i2c: ov7670: 0 instead of -EINVAL was returned
media: usb: siano: Fix use after free bugs caused by do_submit_urb
media: saa7134: Use video_unregister_device for radio_dev
rpmsg: glink: Avoid infinite loop on intent for missing channel
rpmsg: glink: Release driver_override
ARM: OMAP2+: omap4-common: Fix refcount leak bug
arm64: dts: qcom: msm8996: Add additional A2NoC clocks
udf: Define EFSCORRUPTED error code
context_tracking: Fix noinstr vs KASAN
exit: Detect and fix irq disabled state in oops
ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy
fs: Use CHECK_DATA_CORRUPTION() when kernel bugs are detected
blk-iocost: fix divide by 0 error in calc_lcoefs()
blk-cgroup: dropping parent refcount after pd_free_fn() is done
blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()
trace/blktrace: fix memory leak with using debugfs_lookup()
btrfs: scrub: improve tree block error reporting
arm64: zynqmp: Enable hs termination flag for USB dwc3 controller
cpuidle, intel_idle: Fix CPUIDLE_FLAG_INIT_XSTATE
x86/fpu: Don't set TIF_NEED_FPU_LOAD for PF_IO_WORKER threads
cpuidle: drivers: firmware: psci: Dont instrument suspend code
cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
perf/x86/intel/uncore: Add Meteor Lake support
wifi: ath9k: Fix use-after-free in ath9k_hif_usb_disconnect()
wifi: ath11k: fix monitor mode bringup crash
wifi: brcmfmac: Fix potential stack-out-of-bounds in brcmf_c_preinit_dcmds()
rcu: Make RCU_LOCKDEP_WARN() avoid early lockdep checks
rcu: Suppress smp_processor_id() complaint in synchronize_rcu_expedited_wait()
srcu: Delegate work to the boot cpu if using SRCU_SIZE_SMALL
rcu-tasks: Make rude RCU-Tasks work well with CPU hotplug
rcu-tasks: Handle queue-shrink/callback-enqueue race condition
wifi: ath11k: debugfs: fix to work with multiple PCI devices
thermal: intel: Fix unsigned comparison with less than zero
timers: Prevent union confusion from unexpected restart_syscall()
x86/bugs: Reset speculation control settings on init
bpftool: Always disable stack protection for BPF objects
wifi: brcmfmac: ensure CLM version is null-terminated to prevent stack-out-of-bounds
wifi: mt7601u: fix an integer underflow
inet: fix fast path in __inet_hash_connect()
ice: restrict PTP HW clock freq adjustments to 100, 000, 000 PPB
ice: add missing checks for PF vsi type
ACPI: Don't build ACPICA with '-Os'
bpf, docs: Fix modulo zero, division by zero, overflow, and underflow
thermal: intel: intel_pch: Add support for Wellsburg PCH
clocksource: Suspend the watchdog temporarily when high read latency detected
crypto: hisilicon: Wipe entire pool on error
net: bcmgenet: Add a check for oversized packets
m68k: Check syscall_trace_enter() return code
s390/mm,ptdump: avoid Kasan vs Memcpy Real markers swapping
netfilter: nf_tables: NULL pointer dereference in nf_tables_updobj()
can: isotp: check CAN address family in isotp_bind()
gcc-plugins: drop -std=gnu++11 to fix GCC 13 build
tools/power/x86/intel-speed-select: Add Emerald Rapid quirk
wifi: mt76: dma: free rx_head in mt76_dma_rx_cleanup
ACPI: video: Fix Lenovo Ideapad Z570 DMI match
net/mlx5: fw_tracer: Fix debug print
coda: Avoid partial allocation of sig_inputArgs
uaccess: Add minimum bounds check on kernel buffer size
s390/idle: mark arch_cpu_idle() noinstr
time/debug: Fix memory leak with using debugfs_lookup()
PM: domains: fix memory leak with using debugfs_lookup()
PM: EM: fix memory leak with using debugfs_lookup()
Bluetooth: Fix issue with Actions Semi ATS2851 based devices
Bluetooth: btusb: Add new PID/VID 0489:e0f2 for MT7921
Bluetooth: btusb: Add VID:PID 13d3:3529 for Realtek RTL8821CE
wifi: rtw89: debug: avoid invalid access on RTW89_DBG_SEL_MAC_30
hv_netvsc: Check status in SEND_RNDIS_PKT completion message
s390/kfence: fix page fault reporting
devlink: Fix TP_STRUCT_entry in trace of devlink health report
scm: add user copy checks to put_cmsg()
drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Tab 3 X90F
drm: panel-orientation-quirks: Add quirk for DynaBook K50
drm/amd/display: Reduce expected sdp bandwidth for dcn321
drm/amd/display: Revert Reduce delay when sink device not able to ACK 00340h write
drm/amd/display: Fix potential null-deref in dm_resume
drm/omap: dsi: Fix excessive stack usage
HID: Add Mapping for System Microphone Mute
drm/tiny: ili9486: Do not assume 8-bit only SPI controllers
drm/amd/display: Defer DIG FIFO disable after VID stream enable
drm/radeon: free iio for atombios when driver shutdown
drm/amd: Avoid BUG() for case of SRIOV missing IP version
drm/amdkfd: Page aligned memory reserve size
scsi: lpfc: Fix use-after-free KFENCE violation during sysfs firmware write
Revert "fbcon: don't lose the console font across generic->chip driver switch"
drm/amd: Avoid ASSERT for some message failures
drm: amd: display: Fix memory leakage
drm/amd/display: fix mapping to non-allocated address
HID: uclogic: Add frame type quirk
HID: uclogic: Add battery quirk
HID: uclogic: Add support for XP-PEN Deco Pro SW
HID: uclogic: Add support for XP-PEN Deco Pro MW
drm/msm/dsi: Add missing check for alloc_ordered_workqueue
drm: rcar-du: Add quirk for H3 ES1.x pclk workaround
drm: rcar-du: Fix setting a reserved bit in DPLLCR
drm/drm_print: correct format problem
drm/amd/display: Set hvm_enabled flag for S/G mode
habanalabs: extend fatal messages to contain PCI info
habanalabs: fix bug in timestamps registration code
docs/scripts/gdb: add necessary make scripts_gdb step
drm/msm/dpu: Add DSC hardware blocks to register snapshot
ASoC: soc-compress: Reposition and add pcm_mutex
ASoC: kirkwood: Iterate over array indexes instead of using pointer math
regulator: max77802: Bounds check regulator id against opmode
regulator: s5m8767: Bounds check id indexing into arrays
Revert "drm/amdgpu: TA unload messages are not actually sent to psp when amdgpu is uninstalled"
drm/amd/display: fix FCLK pstate change underflow
gfs2: Improve gfs2_make_fs_rw error handling
hwmon: (coretemp) Simplify platform device handling
hwmon: (nct6775) Directly call ASUS ACPI WMI method
hwmon: (nct6775) B650/B660/X670 ASUS boards support
pinctrl: at91: use devm_kasprintf() to avoid potential leaks
drm/amd/display: Do not commit pipe when updating DRR
scsi: snic: Fix memory leak with using debugfs_lookup()
scsi: ufs: core: Fix device management cmd timeout flow
HID: logitech-hidpp: Don't restart communication if not necessary
drm/amd/display: Enable P-state validation checks for DCN314
drm: panel-orientation-quirks: Add quirk for Lenovo IdeaPad Duet 3 10IGL5
drm/amd/display: Disable HUBP/DPP PG on DCN314 for now
dm thin: add cond_resched() to various workqueue loops
dm cache: add cond_resched() to various workqueue loops
nfsd: zero out pointers after putting nfsd_files on COPY setup error
nfsd: don't hand out delegation on setuid files being opened for write
cifs: prevent data race in smb2_reconnect()
drm/shmem-helper: Revert accidental non-GPL export
driver core: fw_devlink: Avoid spurious error message
wifi: rtl8xxxu: fixing transmisison failure for rtl8192eu
scsi: mpt3sas: Remove usage of dma_get_required_mask() API
firmware: coreboot: framebuffer: Ignore reserved pixel color bits
block: don't allow multiple bios for IOCB_NOWAIT issue
block: clear bio->bi_bdev when putting a bio back in the cache
block: be a bit more careful in checking for NULL bdev while polling
rtc: pm8xxx: fix set-alarm race
ipmi: ipmb: Fix the MODULE_PARM_DESC associated to 'retry_time_ms'
ipmi:ssif: resend_msg() cannot fail
ipmi_ssif: Rename idle state and check
io_uring: Replace 0-length array with flexible array
io_uring: use user visible tail in io_uring_poll()
io_uring: handle TIF_NOTIFY_RESUME when checking for task_work
io_uring: add a conditional reschedule to the IOPOLL cancelation loop
io_uring: add reschedule point to handle_tw_list()
io_uring/rsrc: disallow multi-source reg buffers
io_uring: remove MSG_NOSIGNAL from recvmsg
io_uring: fix fget leak when fs don't support nowait buffered read
s390/extmem: return correct segment type in __segment_load()
s390: discard .interp section
s390/kprobes: fix irq mask clobbering on kprobe reenter from post_handler
s390/kprobes: fix current_kprobe never cleared after kprobes reenter
KVM: s390: disable migration mode when dirty tracking is disabled
cifs: Fix uninitialized memory read in smb3_qfs_tcon()
cifs: Fix uninitialized memory reads for oparms.mode
cifs: fix mount on old smb servers
cifs: introduce cifs_io_parms in smb2_async_writev()
cifs: split out smb3_use_rdma_offload() helper
cifs: don't try to use rdma offload on encrypted connections
cifs: Check the lease context if we actually got a lease
cifs: return a single-use cfid if we did not get a lease
scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization
scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info()
scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi
btrfs: hold block group refcount during async discard
locking/rwsem: Prevent non-first waiter from spinning in down_write() slowpath
ksmbd: fix wrong data area length for smb2 lock request
ksmbd: do not allow the actual frame length to be smaller than the rfc1002 length
ksmbd: fix possible memory leak in smb2_lock()
torture: Fix hang during kthread shutdown phase
ARM: dts: exynos: correct HDMI phy compatible in Exynos4
io_uring: mark task TASK_RUNNING before handling resume/task work
hfs: fix missing hfs_bnode_get() in __hfs_bnode_create
fs: hfsplus: fix UAF issue in hfsplus_put_super
exfat: fix reporting fs error when reading dir beyond EOF
exfat: fix unexpected EOF while reading dir
exfat: redefine DIR_DELETED as the bad cluster number
exfat: fix inode->i_blocks for non-512 byte sector size device
fs: dlm: don't set stop rx flag after node reset
fs: dlm: move sending fin message into state change handling
fs: dlm: send FIN ack back in right cases
f2fs: fix information leak in f2fs_move_inline_dirents()
f2fs: retry to update the inode page given data corruption
f2fs: fix cgroup writeback accounting with fs-layer encryption
f2fs: fix kernel crash due to null io->bio
ocfs2: fix defrag path triggering jbd2 ASSERT
ocfs2: fix non-auto defrag path not working issue
fs/cramfs/inode.c: initialize file_ra_state
selftests/landlock: Skip overlayfs tests when not supported
selftests/landlock: Test ptrace as much as possible with Yama
udf: Truncate added extents on failed expansion
udf: Do not bother merging very long extents
udf: Do not update file length for failed writes to inline files
udf: Preserve link count of system files
udf: Detect system inodes linked into directory hierarchy
udf: Fix file corruption when appending just after end of preallocated extent
md: don't update recovery_cp when curr_resync is ACTIVE
RDMA/siw: Fix user page pinning accounting
KVM: Destroy target device if coalesced MMIO unregistration fails
KVM: VMX: Fix crash due to uninitialized current_vmcs
KVM: Register /dev/kvm as the _very_ last thing during initialization
KVM: x86: Purge "highest ISR" cache when updating APICv state
KVM: x86: Blindly get current x2APIC reg value on "nodecode write" traps
KVM: x86: Don't inhibit APICv/AVIC on xAPIC ID "change" if APIC is disabled
KVM: x86: Don't inhibit APICv/AVIC if xAPIC ID mismatch is due to 32-bit ID
KVM: SVM: Flush the "current" TLB when activating AVIC
KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target
KVM: SVM: Don't put/load AVIC when setting virtual APIC mode
KVM: x86: Inject #GP if WRMSR sets reserved bits in APIC Self-IPI
KVM: x86: Inject #GP on x2APIC WRMSR that sets reserved bits 63:32
KVM: SVM: Fix potential overflow in SEV's send|receive_update_data()
KVM: SVM: hyper-v: placate modpost section mismatch error
selftests: x86: Fix incorrect kernel headers search path
x86/virt: Force GIF=1 prior to disabling SVM (for reboot flows)
x86/crash: Disable virt in core NMI crash handler to avoid double shootdown
x86/reboot: Disable virtualization in an emergency if SVM is supported
x86/reboot: Disable SVM, not just VMX, when stopping CPUs
x86/kprobes: Fix __recover_optprobed_insn check optimizing logic
x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe range
x86/microcode/amd: Remove load_microcode_amd()'s bsp parameter
x86/microcode/AMD: Add a @cpu parameter to the reloading functions
x86/microcode/AMD: Fix mixed steppings support
x86/speculation: Allow enabling STIBP with legacy IBRS
Documentation/hw-vuln: Document the interaction between IBRS and STIBP
virt/sev-guest: Return -EIO if certificate buffer is not large enough
brd: mark as nowait compatible
brd: return 0/-error from brd_insert_page()
brd: check for REQ_NOWAIT and set correct page allocation mask
ima: fix error handling logic when file measurement failed
ima: Align ima_file_mmap() parameters with mmap_file LSM hook
selftests/powerpc: Fix incorrect kernel headers search path
selftests/ftrace: Fix eprobe syntax test case to check filter support
selftests: sched: Fix incorrect kernel headers search path
selftests: core: Fix incorrect kernel headers search path
selftests: pid_namespace: Fix incorrect kernel headers search path
selftests: arm64: Fix incorrect kernel headers search path
selftests: clone3: Fix incorrect kernel headers search path
selftests: pidfd: Fix incorrect kernel headers search path
selftests: membarrier: Fix incorrect kernel headers search path
selftests: kcmp: Fix incorrect kernel headers search path
selftests: media_tests: Fix incorrect kernel headers search path
selftests: gpio: Fix incorrect kernel headers search path
selftests: filesystems: Fix incorrect kernel headers search path
selftests: user_events: Fix incorrect kernel headers search path
selftests: ptp: Fix incorrect kernel headers search path
selftests: sync: Fix incorrect kernel headers search path
selftests: rseq: Fix incorrect kernel headers search path
selftests: move_mount_set_group: Fix incorrect kernel headers search path
selftests: mount_setattr: Fix incorrect kernel headers search path
selftests: perf_events: Fix incorrect kernel headers search path
selftests: ipc: Fix incorrect kernel headers search path
selftests: futex: Fix incorrect kernel headers search path
selftests: drivers: Fix incorrect kernel headers search path
selftests: dmabuf-heaps: Fix incorrect kernel headers search path
selftests: vm: Fix incorrect kernel headers search path
selftests: seccomp: Fix incorrect kernel headers search path
irqdomain: Fix association race
irqdomain: Fix disassociation race
irqdomain: Look for existing mapping only once
irqdomain: Drop bogus fwspec-mapping error handling
irqdomain: Refactor __irq_domain_alloc_irqs()
irqdomain: Fix mapping-creation race
irqdomain: Fix domain registration race
crypto: qat - fix out-of-bounds read
mm/damon/paddr: fix missing folio_put()
ALSA: ice1712: Do not left ice->gpio_mutex locked in aureon_add_controls()
ALSA: hda/realtek: Add quirk for HP EliteDesk 800 G6 Tower PC
jbd2: fix data missing when reusing bh which is ready to be checkpointed
ext4: optimize ea_inode block expansion
ext4: refuse to create ea block when umounted
cxl/pmem: Fix nvdimm registration races
mtd: spi-nor: sfdp: Fix index value for SCCR dwords
mtd: spi-nor: spansion: Consider reserved bits in CFR5 register
mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type
dm: send just one event on resize, not two
dm: add cond_resched() to dm_wq_work()
dm: add cond_resched() to dm_wq_requeue_work()
wifi: rtw88: use RTW_FLAG_POWERON flag to prevent to power on/off twice
wifi: rtl8xxxu: Use a longer retry limit of 48
wifi: ath11k: allow system suspend to survive ath11k
wifi: cfg80211: Fix use after free for wext
wifi: cfg80211: Set SSID if it is not already set
cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies
qede: fix interrupt coalescing configuration
thermal: intel: powerclamp: Fix cur_state for multi package system
dm flakey: fix logic when corrupting a bio
dm cache: free background tracker's queued work in btracker_destroy
dm flakey: don't corrupt the zero page
dm flakey: fix a bug with 32-bit highmem systems
hwmon: (peci/cputemp) Fix off-by-one in coretemp_label allocation
hwmon: (nct6775) Fix incorrect parenthesization in nct6775_write_fan_div()
ARM: dts: qcom: sdx65: Add Qcom SMMU-500 as the fallback for IOMMU node
ARM: dts: qcom: sdx55: Add Qcom SMMU-500 as the fallback for IOMMU node
ARM: dts: exynos: correct TMU phandle in Exynos4210
ARM: dts: exynos: correct TMU phandle in Exynos4
ARM: dts: exynos: correct TMU phandle in Odroid XU3 family
ARM: dts: exynos: correct TMU phandle in Exynos5250
ARM: dts: exynos: correct TMU phandle in Odroid XU
ARM: dts: exynos: correct TMU phandle in Odroid HC1
arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP
fuse: add inode/permission checks to fileattr_get/fileattr_set
rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails
ceph: update the time stamps and try to drop the suid/sgid
regulator: core: Use ktime_get_boottime() to determine how long a regulator was off
panic: fix the panic_print NMI backtrace setting
mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON
alpha: fix FEN fault handling
dax/kmem: Fix leak of memory-hotplug resources
mips: fix syscall_get_nr
media: ipu3-cio2: Fix PM runtime usage_count in driver unbind
remoteproc/mtk_scp: Move clk ops outside send_lock
docs: gdbmacros: print newest record
mm: memcontrol: deprecate charge moving
mm/thp: check and bail out if page in deferred queue already
ktest.pl: Give back console on Ctrt^C on monitor
kprobes: Fix to handle forcibly unoptimized kprobes on freeing_list
ktest.pl: Fix missing "end_monitor" when machine check fails
ktest.pl: Add RUN_TIMEOUT option with default unlimited
memory tier: release the new_memtier in find_create_memory_tier()
ring-buffer: Handle race between rb_move_tail and rb_check_pages
tools/bootconfig: fix single & used for logical condition
tracing/eprobe: Fix to add filter on eprobe description in README file
iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter
iommu/amd: Improve page fault error reporting
scsi: aacraid: Allocate cmd_priv with scsicmd
scsi: qla2xxx: Fix link failure in NPIV environment
scsi: qla2xxx: Check if port is online before sending ELS
scsi: qla2xxx: Fix DMA-API call trace on NVMe LS requests
scsi: qla2xxx: Remove unintended flag clearing
scsi: qla2xxx: Fix erroneous link down
scsi: qla2xxx: Remove increment of interface err cnt
scsi: ses: Don't attach if enclosure has no components
scsi: ses: Fix slab-out-of-bounds in ses_enclosure_data_process()
scsi: ses: Fix possible addl_desc_ptr out-of-bounds accesses
scsi: ses: Fix possible desc_ptr out-of-bounds accesses
scsi: ses: Fix slab-out-of-bounds in ses_intf_remove()
RISC-V: add a spin_shadow_stack declaration
riscv: Avoid enabling interrupts in die()
riscv: mm: fix regression due to update_mmu_cache change
riscv: jump_label: Fixup unaligned arch_static_branch function
riscv, mm: Perform BPF exhandler fixup on page fault
riscv: ftrace: Remove wasted nops for !RISCV_ISA_C
riscv: ftrace: Reduce the detour code size to half
MIPS: DTS: CI20: fix otg power gpio
PCI/PM: Observe reset delay irrespective of bridge_d3
PCI: Unify delay handling for reset and resume
PCI: hotplug: Allow marking devices as disconnected during bind/unbind
PCI: Avoid FLR for AMD FCH AHCI adapters
PCI/DPC: Await readiness of secondary bus after reset
bus: mhi: ep: Only send -ENOTCONN status if client driver is available
bus: mhi: ep: Move chan->lock to the start of processing queued ch ring
bus: mhi: ep: Save channel state locally during suspend and resume
iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode
iommu/vt-d: Fix PASID directory pointer coherency
vfio/type1: exclude mdevs from VFIO_UPDATE_VADDR
vfio/type1: prevent underflow of locked_vm via exec()
vfio/type1: track locked_vm per dma
vfio/type1: restore locked_vm
drm/amd: Fix initialization for nbio 7.5.1
drm/i915/quirks: Add inverted backlight quirk for HP 14-r206nv
drm/radeon: Fix eDP for single-display iMac11,2
drm/i915: Don't use stolen memory for ring buffers with LLC
drm/i915: Don't use BAR mappings for ring buffers with LLC
drm/gud: Fix UBSAN warning
drm/edid: fix AVI infoframe aspect ratio handling
drm/edid: fix parsing of 3D modes from HDMI VSDB
qede: avoid uninitialized entries in coal_entry array
brd: use radix_tree_maybe_preload instead of radix_tree_preload
sbitmap: Advance the queue index before waking up a queue
wait: Return number of exclusive waiters awaken
sbitmap: Try each queue to wake up at least one waiter
kbuild: Port silent mode detection to future gnu make.
net: avoid double iput when sock_alloc_file fails
Linux 6.1.16
Change-Id: I705caf70ee547e6d55f38d133bdcd50713aed745
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 99c621ef243bda726fb8d982a274ded96570b410 ]
When unbind_workers() reads wq_unbound_cpumask to set the affinity of
freshly-unbound kworkers, it only holds wq_pool_attach_mutex. This isn't
sufficient as wq_unbound_cpumask is only protected by wq_pool_mutex.
Make wq_unbound_cpumask protected with wq_pool_attach_mutex and also
remove the need of temporary saved_cpumask.
Fixes: 10a5a651e3 ("workqueue: Restrict kworker in the offline CPU pool running on housekeeping CPUs")
Reported-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Export workqueue_execute_start/end tracepoints, so that vendor modules
can register probes for these tracepoints.
To debug workqueue-related issue, workqueue_execute_start/end infos must be necessary
to find whether workqueue start and exit normally or not.
And workqueue_execute_start/end also check that workqueue is operated normally or not.
Bug: 205928005
Change-Id: Ib4c8f39ff8305a1d52fbca9d06b5e792396a3a2d
Signed-off-by: Changki Kim <changki.kim@samsung.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
This replaces the prior support for Clang's standard Control Flow
Integrity (CFI) instrumentation, which has required a lot of special
conditions (e.g. LTO) and work-arounds. The current implementation
("Kernel CFI") is specific to C, directly designed for the Linux kernel,
and takes advantage of architectural features like x86's IBT. This
series retains arm64 support and adds x86 support. Additional "generic"
architectural support is expected soon:
https://github.com/samitolvanen/llvm-project/commits/kcfi_generic
- treewide: Remove old CFI support details
- arm64: Replace Clang CFI support with Clang KCFI support
- x86: Introduce Clang KCFI support
-----BEGIN PGP SIGNATURE-----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=Li4D
-----END PGP SIGNATURE-----
Merge tag 'kcfi-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kcfi updates from Kees Cook:
"This replaces the prior support for Clang's standard Control Flow
Integrity (CFI) instrumentation, which has required a lot of special
conditions (e.g. LTO) and work-arounds.
The new implementation ("Kernel CFI") is specific to C, directly
designed for the Linux kernel, and takes advantage of architectural
features like x86's IBT. This series retains arm64 support and adds
x86 support.
GCC support is expected in the future[1], and additional "generic"
architectural support is expected soon[2].
Summary:
- treewide: Remove old CFI support details
- arm64: Replace Clang CFI support with Clang KCFI support
- x86: Introduce Clang KCFI support"
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107048 [1]
Link: https://github.com/samitolvanen/llvm-project/commits/kcfi_generic [2]
* tag 'kcfi-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits)
x86: Add support for CONFIG_CFI_CLANG
x86/purgatory: Disable CFI
x86: Add types to indirectly called assembly functions
x86/tools/relocs: Ignore __kcfi_typeid_ relocations
kallsyms: Drop CONFIG_CFI_CLANG workarounds
objtool: Disable CFI warnings
objtool: Preserve special st_shndx indexes in elf_update_symbol
treewide: Drop __cficanonical
treewide: Drop WARN_ON_FUNCTION_MISMATCH
treewide: Drop function_nocfi
init: Drop __nocfi from __init
arm64: Drop unneeded __nocfi attributes
arm64: Add CFI error handling
arm64: Add types to indirect called assembly functions
psci: Fix the function type for psci_initcall_t
lkdtm: Emit an indirect call for CFI tests
cfi: Add type helper macros
cfi: Switch to -fsanitize=kcfi
cfi: Drop __CFI_ADDRESSABLE
cfi: Remove CONFIG_CFI_CLANG_SHADOW
...
CONFIG_CFI_CLANG no longer breaks cross-module function address
equality, which makes WARN_ON_FUNCTION_MISMATCH unnecessary. Remove
the definition and switch back to WARN_ON_ONCE.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220908215504.3686827-15-samitolvanen@google.com
Like Hillf Danton mentioned
syzbot should have been able to catch cancel_work_sync() in work context
by checking lockdep_map in __flush_work() for both flush and cancel.
in [1], being unable to report an obvious deadlock scenario shown below is
broken. From locking dependency perspective, sync version of cancel request
should behave as if flush request, for it waits for completion of work if
that work has already started execution.
----------
#include <linux/module.h>
#include <linux/sched.h>
static DEFINE_MUTEX(mutex);
static void work_fn(struct work_struct *work)
{
schedule_timeout_uninterruptible(HZ / 5);
mutex_lock(&mutex);
mutex_unlock(&mutex);
}
static DECLARE_WORK(work, work_fn);
static int __init test_init(void)
{
schedule_work(&work);
schedule_timeout_uninterruptible(HZ / 10);
mutex_lock(&mutex);
cancel_work_sync(&work);
mutex_unlock(&mutex);
return -EINVAL;
}
module_init(test_init);
MODULE_LICENSE("GPL");
----------
The check this patch restores was added by commit 0976dfc1d0
("workqueue: Catch more locking problems with flush_work()").
Then, lockdep's crossrelease feature was added by commit b09be676e0
("locking/lockdep: Implement the 'crossrelease' feature"). As a result,
this check was once removed by commit fd1a5b04df ("workqueue: Remove
now redundant lock acquisitions wrt. workqueue flushes").
But lockdep's crossrelease feature was removed by commit e966eaeeb6
("locking/lockdep: Remove the cross-release locking checks"). At this
point, this check should have been restored.
Then, commit d6e89786be ("workqueue: skip lockdep wq dependency in
cancel_work_sync()") introduced a boolean flag in order to distinguish
flush_work() and cancel_work_sync(), for checking "struct workqueue_struct"
dependency when called from cancel_work_sync() was causing false positives.
Then, commit 87915adc3f ("workqueue: re-add lockdep dependencies for
flushing") tried to restore "struct work_struct" dependency check, but by
error checked this boolean flag. Like an example shown above indicates,
"struct work_struct" dependency needs to be checked for both flush_work()
and cancel_work_sync().
Link: https://lkml.kernel.org/r/20220504044800.4966-1-hdanton@sina.com [1]
Reported-by: Hillf Danton <hdanton@sina.com>
Suggested-by: Lai Jiangshan <jiangshanlai@gmail.com>
Fixes: 87915adc3f ("workqueue: re-add lockdep dependencies for flushing")
Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Tejun Heo <tj@kernel.org>
New driver:
- logicvc
vfio:
- use aperture API
core:
- of: Add data-lane helpers and convert drivers
- connector: Remove deprecated ida_simple_get()
media:
- Add various RGB666 and RGB888 format constants
panel:
- Add HannStar HSD101PWW
- Add ETML0700Y5DHA
dma-buf:
- add sync-file API
- set dma mask for udmabuf devices
fbcon:
- Improve scrolling performance
- Sanitize input
fbdev:
- device unregistering fixes
- vesa: Support COMPILE_TEST
- Disable firmware-device registration when first native driver loads
aperture:
- fix segfault during hot-unplug
- export for use with other subsystems
client:
- use driver validated modes
dp:
- aux: make probing more reliable
- mst: Read extended DPCD capabilities during system resume
- Support waiting for HDP signal
- Port-validation fixes
edid:
- CEA data-block iterators
- struct drm_edid introduction
- implement HF-EEODB extension
gem:
- don't use fb format non-existing planes
probe-helper:
- use 640x480 as displayport fallback
scheduler:
- don't kill jobs in interrupt context
bridge:
- Add support for i.MX8qxp and i.MX8qm
- lots of fixes/cleanups
- Add TI-DLPC3433
- fy07024di26a30d: Optional GPIO reset
- ldb: Add reg and reg-name properties to bindings, Kconfig fixes
- lt9611: Fix display sensing;
- tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling
- tc358775: Fix clock settings
- ti-sn65dsi83: Allow GPIO to sleep
- adv7511: I2C fixes
- anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback
- fsl-ldb: Drop DE flip
- ti-sn65dsi86: Convert to atomic modesetting
amdgpu:
- use atomic fence helpers in DM
- fix VRAM address calculations
- export CRTC bpc via debugfs
- Initial devcoredump support
- Enable high priority gfx queue on asics which support it
- Adjust GART size on newer APUs for S/G display
- Soft reset for GFX 11 / SDMA 6
- Add gfxoff status query for vangogh
- Fix timestamps for cursor only commits
- Adjust GART size on newer APUs for S/G display
- fix buddy memory corruption
amdkfd:
- MMU notifier fixes
- P2P DMA support using dma-buf
- Add available memory IOCTL
- HMM profiler support
- Simplify GPUVM validation
- Unified memory for CWSR save/restore area
i915:
- General driver clean-up
- DG2 enabling (still under force probe)
- DG2 small BAR memory support
- HuC loading support
- DG2 workarounds
- DG2/ATS-M device IDs added
- Ponte Vecchio prep work and new blitter engines
- add Meteorlake support
- Fix sparse warnings
- DMC MMIO range checks
- Audio related fixes
- Runtime PM fixes
- PSR fixes
- Media freq factor and per-gt enhancements
- DSI fixes for ICL+
- Disable DMC flip queue handlers
- ADL_P voltage swing updates
- Use more the VBT for panel information
- Fix on Type-C ports with TBT mode
- Improve fastset and allow seamless M/N changes
- Accept more fixed modes with VRR/DMRRS panels
- Disable connector polling for a headless SKU
- ADL-S display PLL w/a
- Enable THP on Icelake and beyond
- Fix i915_gem_object_ggtt_pin_ww regression on old platforms
- Expose per tile media freq factor in sysfs
- Fix dma_resv fence handling in multi-batch execbuf
- Improve on suspend / resume time with VT-d enabled
- export CRTC bpc settings via debugfs
msm:
- gpu: a619 support
- gpu: Fix for unclocked GMU register access
- gpu: Devcore dump enhancements
- client utilization via fdinfo support
- fix fence rollover issue
- gem: Lockdep false-positive warning fix
- gem: Switch to pfn mappings
- WB support on sc7180
- dp: dropped custom bulk clock implementation
- fix link retraining on resolution change
- hdmi: dropped obsolete GPIO support
tegra:
- context isolation for host1x engines
- tegra234 soc support
mediatek:
- add vdosys0/1 for mt8195
- add MT8195 dp_intf driver
exynos:
- Fix resume function issue of exynos decon driver by calling
clk_disable_unprepare() properly if clk_prepare_enable() failed.
nouveau:
- set of misc fixes/cleanups
- display cleanups
gma500:
- Cleanup connector I2C handling
hyperv:
- Unify VRAM allocation of Gen1 and Gen2
meson:
- Support YUV422 output; Refcount fixes
mgag200:
- Support damage clipping
- Support gamma handling
- Protect concurrent HW access
- Fixes to connector
- Store model-specific limits in device-info structure
- fix PCI register init
panfrost:
- Valhall support
r128:
- Fix bit-shift overflow
rockchip:
- Locking fixes in error path
ssd130x:
- Fix built-in linkage
udl:
- Always advertize VGA connector
ast:
- Support multiple outputs
- fix black screen on resume
sun4i:
- HDMI PHY cleanups
vc4:
- Add support for BCM2711
vkms:
- Allocate output buffer with vmalloc()
mcde:
- Fix ref-count leak
mxsfb/lcdif:
- Support i.MX8MP LCD controller
stm/ltdc:
- Support dynamic Z order
- Support mirroring
ingenic:
- Fix display at maximum resolution
-----BEGIN PGP SIGNATURE-----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=HQ9U
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights:
- New driver for logicvc - which is a display IP core.
- EDID parser rework to add new extensions
- fbcon scrolling improvements
- i915 has some more DG2 work but not enabled by default, but should
have enough features for userspace to work now.
Otherwise it's lots of work all over the place. Detailed summary:
New driver:
- logicvc
vfio:
- use aperture API
core:
- of: Add data-lane helpers and convert drivers
- connector: Remove deprecated ida_simple_get()
media:
- Add various RGB666 and RGB888 format constants
panel:
- Add HannStar HSD101PWW
- Add ETML0700Y5DHA
dma-buf:
- add sync-file API
- set dma mask for udmabuf devices
fbcon:
- Improve scrolling performance
- Sanitize input
fbdev:
- device unregistering fixes
- vesa: Support COMPILE_TEST
- Disable firmware-device registration when first native driver loads
aperture:
- fix segfault during hot-unplug
- export for use with other subsystems
client:
- use driver validated modes
dp:
- aux: make probing more reliable
- mst: Read extended DPCD capabilities during system resume
- Support waiting for HDP signal
- Port-validation fixes
edid:
- CEA data-block iterators
- struct drm_edid introduction
- implement HF-EEODB extension
gem:
- don't use fb format non-existing planes
probe-helper:
- use 640x480 as displayport fallback
scheduler:
- don't kill jobs in interrupt context
bridge:
- Add support for i.MX8qxp and i.MX8qm
- lots of fixes/cleanups
- Add TI-DLPC3433
- fy07024di26a30d: Optional GPIO reset
- ldb: Add reg and reg-name properties to bindings, Kconfig fixes
- lt9611: Fix display sensing;
- tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling
- tc358775: Fix clock settings
- ti-sn65dsi83: Allow GPIO to sleep
- adv7511: I2C fixes
- anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback
- fsl-ldb: Drop DE flip
- ti-sn65dsi86: Convert to atomic modesetting
amdgpu:
- use atomic fence helpers in DM
- fix VRAM address calculations
- export CRTC bpc via debugfs
- Initial devcoredump support
- Enable high priority gfx queue on asics which support it
- Adjust GART size on newer APUs for S/G display
- Soft reset for GFX 11 / SDMA 6
- Add gfxoff status query for vangogh
- Fix timestamps for cursor only commits
- Adjust GART size on newer APUs for S/G display
- fix buddy memory corruption
amdkfd:
- MMU notifier fixes
- P2P DMA support using dma-buf
- Add available memory IOCTL
- HMM profiler support
- Simplify GPUVM validation
- Unified memory for CWSR save/restore area
i915:
- General driver clean-up
- DG2 enabling (still under force probe)
- DG2 small BAR memory support
- HuC loading support
- DG2 workarounds
- DG2/ATS-M device IDs added
- Ponte Vecchio prep work and new blitter engines
- add Meteorlake support
- Fix sparse warnings
- DMC MMIO range checks
- Audio related fixes
- Runtime PM fixes
- PSR fixes
- Media freq factor and per-gt enhancements
- DSI fixes for ICL+
- Disable DMC flip queue handlers
- ADL_P voltage swing updates
- Use more the VBT for panel information
- Fix on Type-C ports with TBT mode
- Improve fastset and allow seamless M/N changes
- Accept more fixed modes with VRR/DMRRS panels
- Disable connector polling for a headless SKU
- ADL-S display PLL w/a
- Enable THP on Icelake and beyond
- Fix i915_gem_object_ggtt_pin_ww regression on old platforms
- Expose per tile media freq factor in sysfs
- Fix dma_resv fence handling in multi-batch execbuf
- Improve on suspend / resume time with VT-d enabled
- export CRTC bpc settings via debugfs
msm:
- gpu: a619 support
- gpu: Fix for unclocked GMU register access
- gpu: Devcore dump enhancements
- client utilization via fdinfo support
- fix fence rollover issue
- gem: Lockdep false-positive warning fix
- gem: Switch to pfn mappings
- WB support on sc7180
- dp: dropped custom bulk clock implementation
- fix link retraining on resolution change
- hdmi: dropped obsolete GPIO support
tegra:
- context isolation for host1x engines
- tegra234 soc support
mediatek:
- add vdosys0/1 for mt8195
- add MT8195 dp_intf driver
exynos:
- Fix resume function issue of exynos decon driver by calling
clk_disable_unprepare() properly if clk_prepare_enable() failed.
nouveau:
- set of misc fixes/cleanups
- display cleanups
gma500:
- Cleanup connector I2C handling
hyperv:
- Unify VRAM allocation of Gen1 and Gen2
meson:
- Support YUV422 output; Refcount fixes
mgag200:
- Support damage clipping
- Support gamma handling
- Protect concurrent HW access
- Fixes to connector
- Store model-specific limits in device-info structure
- fix PCI register init
panfrost:
- Valhall support
r128:
- Fix bit-shift overflow
rockchip:
- Locking fixes in error path
ssd130x:
- Fix built-in linkage
udl:
- Always advertize VGA connector
ast:
- Support multiple outputs
- fix black screen on resume
sun4i:
- HDMI PHY cleanups
vc4:
- Add support for BCM2711
vkms:
- Allocate output buffer with vmalloc()
mcde:
- Fix ref-count leak
mxsfb/lcdif:
- Support i.MX8MP LCD controller
stm/ltdc:
- Support dynamic Z order
- Support mirroring
ingenic:
- Fix display at maximum resolution"
* tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm: (1480 commits)
drm/amd/display: Fix a compilation failure on PowerPC caused by FPU code
drm/amdgpu: enable support for psp 13.0.4 block
drm/amdgpu: add files for PSP 13.0.4
drm/amdgpu: add header files for MP 13.0.4
drm/amdgpu: correct RLC_RLCS_BOOTLOAD_STATUS offset and index
drm/amdgpu: send msg to IMU for the front-door loading
drm/amdkfd: use time_is_before_jiffies(a + b) to replace "jiffies - a > b"
drm/amdgpu: fix hive reference leak when reflecting psp topology info
drm/amd/pm: enable GFX ULV feature support for SMU13.0.0
drm/amd/pm: update driver if header for SMU 13.0.0
drm/amdgpu: move mes self test after drm sched re-started
drm/amdgpu: drop non-necessary call trace dump
drm/amdgpu: enable VCN cg and JPEG cg/pg
drm/amdgpu: vcn_4_0_2 video codec query
drm/amdgpu: add VCN_4_0_2 firmware support
drm/amdgpu: add VCN function in NBIO v7.7
drm/amdgpu: fix a vcn4 boot poll bug in emulation mode
drm/amd/amdgpu: add memory training support for PSP_V13
drm/amdkfd: remove an unnecessary amdgpu_bo_ref
drm/amd/pm: Add get_gfx_off_status interface for yellow carp
...
Doing set_cpus_allowed_ptr() with wq_unbound_cpumask can be possible
fails and trigger the false warning.
Use cpu_possible_mask instead when wq_unbound_cpumask has no active CPUs.
It is very easy to trigger the warning:
Set wq_unbound_cpumask to a small set of CPUs.
Offline all the CPUs of wq_unbound_cpumask.
Offline an extra CPU and trigger the warning.
Fixes: 10a5a651e3 ("workqueue: Restrict kworker in the offline CPU pool running on housekeeping CPUs")
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This reverts commit 6417250d3f.
amdpgu need this function in order to prematurly stop pending
reset works when another reset work already in progress.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Lai Jiangshan<jiangshanlai@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since flush operation synchronously waits for completion, flushing
system-wide WQs (e.g. system_wq) might introduce possibility of deadlock
due to unexpected locking dependency. Tejun Heo commented at [1] that it
makes no sense at all to call flush_workqueue() on the shared WQs as the
caller has no idea what it's gonna end up waiting for.
Although there is flush_scheduled_work() which flushes system_wq WQ with
"Think twice before calling this function! It's very easy to get into
trouble if you don't take great care." warning message, syzbot found a
circular locking dependency caused by flushing system_wq WQ [2].
Therefore, let's change the direction to that developers had better use
their local WQs if flush_scheduled_work()/flush_workqueue(system_*_wq) is
inevitable.
Steps for converting system-wide WQs into local WQs are explained at [3],
and a conversion to stop flushing system-wide WQs is in progress. Now we
want some mechanism for preventing developers who are not aware of this
conversion from again start flushing system-wide WQs.
Since I found that WARN_ON() is complete but awkward approach for teaching
developers about this problem, let's use __compiletime_warning() for
incomplete but handy approach. For completeness, we will also insert
WARN_ON() into __flush_workqueue() after all in-tree users stopped calling
flush_scheduled_work().
Link: https://lore.kernel.org/all/YgnQGZWT%2Fn3VAITX@slm.duckdns.org/ [1]
Link: https://syzkaller.appspot.com/bug?extid=bde0f89deacca7c765b8 [2]
Link: https://lkml.kernel.org/r/49925af7-78a8-a3dd-bce6-cfc02e1a9236@I-love.SAKURA.ne.jp [3]
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Tejun Heo <tj@kernel.org>
When a CPU is going offline, all workers on the CPU's pool will have their
cpus_allowed cleared to cpu_possible_mask and can run on any CPUs including
the isolated ones. Instead, set cpus_allowed to wq_unbound_cpumask so that
the can avoid isolated CPUs.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Steps on the way to 5.18-rc1
Resolves merge conflicts in:
kernel/sched/core.c
kernel/sched/cputime.c
kernel/sched/sched.h
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I5a1cc7ebbaf5f2fda5adf50a0bc7df9783633160
Pull workqueue updates from Tejun Heo:
"Nothing major. Just follow-up cleanups from Lai after the earlier
synchronization simplification"
* 'for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Convert the type of pool->nr_running to int
workqueue: Use wake_up_worker() in wq_worker_sleeping() instead of open code
workqueue: Change the comments of the synchronization about the idle_list
workqueue: Remove the mb() pair between wq_worker_sleeping() and insert_work()
Refer to housekeeping APIs using single feature types instead of flags.
This prevents from passing multiple isolation features at once to
housekeeping interfaces, which soon won't be possible anymore as each
isolation features will have their own cpumask.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Link: https://lore.kernel.org/r/20220207155910.527133-5-frederic@kernel.org
To prepare for supporting each feature of the housekeeping cpumask
toward cpuset, prepare each of the HK_FLAG_* entries to move to their
own cpumask with enforcing to fetch them individually. The new
constraint is that multiple HK_FLAG_* entries can't be mixed together
anymore in a single call to housekeeping cpumask().
This will later allow, for example, to runtime modify the cpulist passed
through "isolcpus=", "nohz_full=" and "rcu_nocbs=" kernel boot
parameters.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220207155910.527133-3-frederic@kernel.org
It is only modified in associated CPU, so it doesn't need to be atomic.
tj: Comment updated.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The wakeup code in wq_worker_sleeping() is the same as wake_up_worker().
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The access to idle_list in wq_worker_sleeping() is changed to be
protected by pool->lock, so the comments above idle_list can be changed
to "L:" which is the meaning of "access with pool->lock held".
And the outdated comments in wq_worker_sleeping() is removed since
the function is not called with rq lock held any more, idle_list is
dereferenced with pool lock now.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In wq_worker_sleeping(), the access to worklist is protected by the
pool->lock, so the memory barrier is unneeded.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
for-5.16-fixes contains two subtle race conditions which were introduced by
scheduler side code cleanups. The branch didn't get pushed out, so merge
into for-5.17.
nr_running is never modified remotely after the schedule callback in
wakeup path is removed.
Rather nr_running is often accessed with other fields in the pool
together, so the cacheline_aligned for nr_running isn't needed.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In unbind_workers(), there are two pool->lock held sections separated
by the code of zapping nr_running. wake_up_worker() needs to be in
pool->lock held section and after zapping nr_running. And zapping
nr_running had to be after schedule() when the local wake up
functionality was in use. Now, the call to schedule() has been removed
along with the local wake up functionality, so the code can be merged
into the same pool->lock held section.
The diffstat shows that it is other code moved down because the diff
tools can not know the meaning of merging lock sections by swapping
two code blocks.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The commit 6d25be5782 ("sched/core, workqueues: Distangle worker
accounting from rq lock") changed the schedule callbacks for workqueue
and moved the schedule callback from the wakeup code to at end of
schedule() in the worker's process context.
It means that the callback wq_worker_running() is guaranteed that
it sees the %WORKER_UNBOUND flag after scheduled since unbind_workers()
is running on the same CPU that all the pool's workers bound to.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Long time before, workers are not ALL bound after CPU_ONLINE, they can
still be running in other CPUs before self rebinding.
But the commit a9ab775bca ("workqueue: directly restore CPU affinity
of workers from CPU_ONLINE") makes rebind_workers() bind them all.
So all workers are on the CPU before the CPU is down.
And the comment in unbind_workers() refers to the workers "which are
still executing works from before the last CPU down" is outdated.
Just removed it.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The commit 6d25be5782 ("sched/core, workqueues: Distangle worker
accounting from rq lock") changed the schedule callbacks for workqueue
and removed the local-wake-up functionality.
Now the wakingup of workers is done by normal fashion and workers not
yet migrated to the specific CPU in concurrency managed pool can also
be woken up by workers that already bound to the specific cpu now.
So this advanced kicking of the idle workers to migrate them to the
associated CPU is unneeded now.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
At CPU-hotplug time, unbind_workers() may preempt a worker while it is
going to sleep. In that case the following scenario can happen:
unbind_workers() wq_worker_sleeping()
-------------- -------------------
if (worker->flags & WORKER_NOT_RUNNING)
return;
//PREEMPTED by unbind_workers
worker->flags |= WORKER_UNBOUND;
[...]
atomic_set(&pool->nr_running, 0);
//resume to worker
atomic_dec_and_test(&pool->nr_running);
After unbind_worker() resets pool->nr_running, the value is expected to
remain 0 until the pool ever gets rebound in case cpu_up() is called on
the target CPU in the future. But here the race leaves pool->nr_running
with a value of -1, triggering the following warning when the worker goes
idle:
WARNING: CPU: 3 PID: 34 at kernel/workqueue.c:1823 worker_enter_idle+0x95/0xc0
Modules linked in:
CPU: 3 PID: 34 Comm: kworker/3:0 Not tainted 5.16.0-rc1+ #34
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
Workqueue: 0x0 (rcu_par_gp)
RIP: 0010:worker_enter_idle+0x95/0xc0
Code: 04 85 f8 ff ff ff 39 c1 7f 09 48 8b 43 50 48 85 c0 74 1b 83 e2 04 75 99 8b 43 34 39 43 30 75 91 8b 83 00 03 00 00 85 c0 74 87 <0f> 0b 5b c3 48 8b 35 70 f1 37 01 48 8d 7b 48 48 81 c6 e0 93 0
RSP: 0000:ffff9b7680277ed0 EFLAGS: 00010086
RAX: 00000000ffffffff RBX: ffff93465eae9c00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9346418a0000 RDI: ffff934641057140
RBP: ffff934641057170 R08: 0000000000000001 R09: ffff9346418a0080
R10: ffff9b768027fdf0 R11: 0000000000002400 R12: ffff93465eae9c20
R13: ffff93465eae9c20 R14: ffff93465eae9c70 R15: ffff934641057140
FS: 0000000000000000(0000) GS:ffff93465eac0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000001cc0c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
worker_thread+0x89/0x3d0
? process_one_work+0x400/0x400
kthread+0x162/0x190
? set_kthread_struct+0x40/0x40
ret_from_fork+0x22/0x30
</TASK>
Also due to this incorrect "nr_running == -1", all sorts of hazards can
happen, starting with queued works being ignored because no workers are
awaken at insert_work() time.
Fix this with checking again the worker flags while pool->lock is locked.
Fixes: b945efcdd0 ("sched: Remove pointless preemption disable in sched_submit_work()")
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
At CPU-hotplug time, unbind_worker() may preempt a worker while it is
waking up. In that case the following scenario can happen:
unbind_workers() wq_worker_running()
-------------- -------------------
if (!(worker->flags & WORKER_NOT_RUNNING))
//PREEMPTED by unbind_workers
worker->flags |= WORKER_UNBOUND;
[...]
atomic_set(&pool->nr_running, 0);
//resume to worker
atomic_inc(&worker->pool->nr_running);
After unbind_worker() resets pool->nr_running, the value is expected to
remain 0 until the pool ever gets rebound in case cpu_up() is called on
the target CPU in the future. But here the race leaves pool->nr_running
with a value of 1, triggering the following warning when the worker goes
idle:
WARNING: CPU: 3 PID: 34 at kernel/workqueue.c:1823 worker_enter_idle+0x95/0xc0
Modules linked in:
CPU: 3 PID: 34 Comm: kworker/3:0 Not tainted 5.16.0-rc1+ #34
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
Workqueue: 0x0 (rcu_par_gp)
RIP: 0010:worker_enter_idle+0x95/0xc0
Code: 04 85 f8 ff ff ff 39 c1 7f 09 48 8b 43 50 48 85 c0 74 1b 83 e2 04 75 99 8b 43 34 39 43 30 75 91 8b 83 00 03 00 00 85 c0 74 87 <0f> 0b 5b c3 48 8b 35 70 f1 37 01 48 8d 7b 48 48 81 c6 e0 93 0
RSP: 0000:ffff9b7680277ed0 EFLAGS: 00010086
RAX: 00000000ffffffff RBX: ffff93465eae9c00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9346418a0000 RDI: ffff934641057140
RBP: ffff934641057170 R08: 0000000000000001 R09: ffff9346418a0080
R10: ffff9b768027fdf0 R11: 0000000000002400 R12: ffff93465eae9c20
R13: ffff93465eae9c20 R14: ffff93465eae9c70 R15: ffff934641057140
FS: 0000000000000000(0000) GS:ffff93465eac0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000001cc0c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
worker_thread+0x89/0x3d0
? process_one_work+0x400/0x400
kthread+0x162/0x190
? set_kthread_struct+0x40/0x40
ret_from_fork+0x22/0x30
</TASK>
Also due to this incorrect "nr_running == 1", further queued work may
end up not being served, because no worker is awaken at work insert time.
This raises rcutorture writer stalls for example.
Fix this with disabling preemption in the right place in
wq_worker_running().
It's worth noting that if the worker migrates and runs concurrently with
unbind_workers(), it is guaranteed to see the WORKER_UNBOUND flag update
due to set_cpus_allowed_ptr() acquiring/releasing rq->lock.
Fixes: 6d25be5782 ("sched/core, workqueues: Distangle worker accounting from rq lock")
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The current queue_work_on() docbook comment says that the caller must
ensure that the specified CPU can't go away, but does not spell out the
consequences, which turn out to be quite mild. Therefore expand this
comment to explicitly say that the penalty for failing to nail down the
specified CPU is that the workqueue handler might find itself executing
on some other CPU.
Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
Shuah Khan reported:
| When CONFIG_PROVE_RAW_LOCK_NESTING=y and CONFIG_KASAN are enabled,
| kasan_record_aux_stack() runs into "BUG: Invalid wait context" when
| it tries to allocate memory attempting to acquire spinlock in page
| allocation code while holding workqueue pool raw_spinlock.
|
| There are several instances of this problem when block layer tries
| to __queue_work(). Call trace from one of these instances is below:
|
| kblockd_mod_delayed_work_on()
| mod_delayed_work_on()
| __queue_delayed_work()
| __queue_work() (rcu_read_lock, raw_spin_lock pool->lock held)
| insert_work()
| kasan_record_aux_stack()
| kasan_save_stack()
| stack_depot_save()
| alloc_pages()
| __alloc_pages()
| get_page_from_freelist()
| rm_queue()
| rm_queue_pcplist()
| local_lock_irqsave(&pagesets.lock, flags);
| [ BUG: Invalid wait context triggered ]
The default kasan_record_aux_stack() calls stack_depot_save() with
GFP_NOWAIT, which in turn can then call alloc_pages(GFP_NOWAIT, ...).
In general, however, it is not even possible to use either GFP_ATOMIC
nor GFP_NOWAIT in certain non-preemptive contexts, including
raw_spin_locks (see gfp.h and commmit ab00db216c).
Fix it by instructing stackdepot to not expand stack storage via
alloc_pages() in case it runs out by using
kasan_record_aux_stack_noalloc().
While there is an increased risk of failing to insert the stack trace,
this is typically unlikely, especially if the same insertion had already
succeeded previously (stack depot hit).
For frequent calls from the same location, it therefore becomes
extremely unlikely that kasan_record_aux_stack_noalloc() fails.
Link: https://lkml.kernel.org/r/20210902200134.25603-1-skhan@linuxfoundation.org
Link: https://lkml.kernel.org/r/20210913112609.2651084-7-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Taras Madan <tarasmadan@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently show_workqueue_state shows the state of all workqueues and of
all worker pools. In certain cases we may need to dump state of only a
specific workqueue or worker pool. For example in destroy_workqueue we
only need to show state of the workqueue which is getting destroyed.
So rename show_workqueue_state to show_all_workqueues(to signify it
dumps state of all busy workqueues) and divide it into more granular
functions (show_one_workqueue and show_one_worker_pool), that would show
states of individual workqueues and worker pools and can be used in
cases such as the one mentioned above.
Also, as mentioned earlier, make destroy_workqueue dump data pertaining
to only the workqueue that is being destroyed and make user(s) of
earlier interface(show_workqueue_state), use new interface
(show_all_workqueues).
Signed-off-by: Imran Khan <imran.f.khan@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Some unfriendly component, such as dpdk, write the same mask to
unbound kworker cpumask again and again. Every time it write to
this interface some work is queue to cpu, even though the mask
is same with the original mask.
So, fix it by return success and do nothing if the cpumask is
equal with the old one.
Signed-off-by: Mengen Sun <mengensun@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Console drivers often queue work while holding locks also taken in their
console write paths, something which can lead to deadlocks on SMP when
dumping workqueue state (e.g. sysrq-t or on suspend failures).
For serial console drivers this could look like:
CPU0 CPU1
---- ----
show_workqueue_state();
lock(&pool->lock); <IRQ>
lock(&port->lock);
schedule_work();
lock(&pool->lock);
printk();
lock(console_owner);
lock(&port->lock);
where workqueues are, for example, used to push data to the line
discipline, process break signals and handle modem-status changes. Line
disciplines and serdev drivers can also queue work on write-wakeup
notifications, etc.
Reworking every console driver to avoid queuing work while holding locks
also taken in their write paths would complicate drivers and is neither
desirable or feasible.
Instead use the deferred-printk mechanism to avoid printing while
holding pool locks when dumping workqueue state.
Note that there are a few WARN_ON() assertions in the workqueue code
which could potentially also trigger a deadlock. Hopefully the ongoing
printk rework will provide a general solution for this eventually.
This was originally reported after a lockdep splat when executing
sysrq-t with the imx serial driver.
Fixes: 3494fc3084 ("workqueue: dump workqueues on sysrq-t")
Cc: stable@vger.kernel.org # 4.0
Reported-by: Fabio Estevam <festevam@denx.de>
Tested-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
There was no strong reason to or not to flush barrier work items in
flush_workqueue(). And we have to make barrier work items not participate
in nr_active so we had been using WORK_NO_COLOR for them which also makes
them can't be flushed by flush_workqueue().
And the users of flush_workqueue() often do not intend to wait barrier work
items issued by flush_work(). That made the choice sound perfect.
But barrier work items have reference to internal structure (pool_workqueue)
and the worker thread[s] is/are still busy for the workqueue user when the
barrrier work items are not done. So it is reasonable to make flush_workqueue()
also watch for flush_work() to make it more robust.
And a problem[1] reported by Li Zhe shows that we need such robustness.
The warning logs are listed below:
WARNING: CPU: 0 PID: 19336 at kernel/workqueue.c:4430 destroy_workqueue+0x11a/0x2f0
*****
destroy_workqueue: test_workqueue9 has the following busy pwq
pwq 4: cpus=2 node=0 flags=0x0 nice=0 active=0/1 refcnt=2
in-flight: 5658:wq_barrier_func
Showing busy workqueues and worker pools:
*****
It shows that even after drain_workqueue() returns, the barrier work item
is still in flight and the pwq (and a worker) is still busy on it.
The problem is caused by flush_workqueue() not watching flush_work():
Thread A Worker
/* normal work item with linked */
process_scheduled_works()
destroy_workqueue() process_one_work()
drain_workqueue() /* run normal work item */
/-- pwq_dec_nr_in_flight()
flush_workqueue() <---/
/* the last normal work item is done */
sanity_check process_one_work()
/-- raw_spin_unlock_irq(&pool->lock)
raw_spin_lock_irq(&pool->lock) <-/ /* maybe preempt */
*WARNING* wq_barrier_func()
/* maybe preempt by cond_resched() */
Thread A can get the pool lock after the Worker unlocks the pool lock before
running wq_barrier_func(). And if there is any preemption happen around
wq_barrier_func(), destroy_workqueue()'s sanity check is more likely to
get the lock and catch it. (Note: preemption is not necessary to cause the bug,
the unlocking is enough to possibly trigger the WARNING.)
A simple solution might be just executing all linked barrier work items
once without releasing pool lock after the head work item's
pwq_dec_nr_in_flight(). But this solution has two problems:
1) the head work item might also be barrier work item when the user-queued
work item is cancelled. For example:
thread 1: thread 2:
queue_work(wq, &my_work)
flush_work(&my_work)
cancel_work_sync(&my_work);
/* Neiter my_work nor the barrier work is scheduled. */
destroy_workqueue(wq);
/* This is an easier way to catch the WARNING. */
2) there might be too much linked barrier work items and running them
all once without releasing pool lock just causes trouble.
The only solution is to make flush_workqueue() aslo watch barrier work
items. So we have to assign a color to these barrier work items which
is the color of the head (user-queued) work item.
Assigning a color doesn't cause any problem in ative management, because
the prvious patch made barrier work items not participate in nr_active
via WORK_STRUCT_INACTIVE rather than reliance on the (old) WORK_NO_COLOR.
[1]: https://lore.kernel.org/lkml/20210812083814.32453-1-lizhe.67@bytedance.com/
Reported-by: Li Zhe <lizhe.67@bytedance.com>
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, WORK_NO_COLOR has two meanings:
Not participate in flushing
Not participate in nr_active
And only non-barrier work items are marked with WORK_STRUCT_INACTIVE
when they are in inactive_works list. The barrier work items are not
marked INACTIVE even linked in inactive_works list since these tail
items are always moved together with the head work item.
These definitions are simple, clean and practical. (Except a small
blemish that only the first meaning of WORK_NO_COLOR is documented in
include/linux/workqueue.h while both meanings are in workqueue.c)
But dual-purpose WORK_NO_COLOR used for barrier work items has proven to
be problematical[1]. Only the second purpose is obligatory. So we plan
to make barrier work items participate in flushing but keep them still
not participating in nr_active.
So the plan is to mark barrier work items inactive without using
WORK_NO_COLOR in this patch so that we can assign a flushing color to
them in next patch.
The reasonable way is to add or reuse a bit in work data of the work
item. But adding a bit will double the size of pool_workqueue.
Currently, WORK_STRUCT_INACTIVE is only used in try_to_grab_pending()
for user-queued work items and try_to_grab_pending() can't work for
barrier work items. So we extend WORK_STRUCT_INACTIVE to also mark
barrier work items no matter which list they are in because we don't
need to determind which list a barrier work item is in.
So the meaning of WORK_STRUCT_INACTIVE becomes just "the work items don't
participate in nr_active" (no matter whether it is a barrier work item or
a user-queued work item). And WORK_STRUCT_INACTIVE for user-queued work
items means they are in inactive_works list.
This patch does it by setting WORK_STRUCT_INACTIVE for barrier work items
in insert_wq_barrier() and checking WORK_STRUCT_INACTIVE first in
pwq_dec_nr_in_flight(). And the meaning of WORK_NO_COLOR is reduced to
only "not participating in flushing".
There is no functionality change intended in this patch. Because
WORK_NO_COLOR+WORK_STRUCT_INACTIVE represents the previous WORK_NO_COLOR
in meaning and try_to_grab_pending() doesn't use for barrier work items
and avoids being confused by this extended WORK_STRUCT_INACTIVE.
A bunch of comment for nr_active & WORK_STRUCT_INACTIVE is also added for
documenting how WORK_STRUCT_INACTIVE works in nr_active management.
[1]: https://lore.kernel.org/lkml/20210812083814.32453-1-lizhe.67@bytedance.com/
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
zhengding chen