Core changes:
- Introduce the for_each_requested_gpio() macro to help in
dependent code all over the place. Also patch a few locations
to use it while we are at it.
- Split out the sysfs code into its own file.
- Split out the character device code into its own file, then
make a set of refactorings and improvements to this code.
We are setting the stage to revamp the userspace API a bit
in the next cycle.
- Fix a whole slew of kerneldoc that was wrong or missing.
New drivers:
- The PCA953x driver now supports the PCAL9535.
Driver improvements:
- A host of incremental modernizations and improvements to the
PCA953x driver.
- Incremental improvements to the Xilinx Zynq driver.
- Some improvements to the GPIO aggregator driver.
- I ran all over the place switching all threaded and other
drivers requesting their own IRQ while using the core
GPIO IRQ helpers to pass the GPIO irq chip as a template
instead of calling the explicit set-up functions. Next merge
window we may retire the old code altogether.
-----BEGIN PGP SIGNATURE-----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=OSvz
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v5.9 kernel cycle.
There is nothing too exciting in it, but a new macro that fixes a
build failure on a minor ARM32 platform that appeared yesterday is
part of it so we better merge it.
Core changes:
- Introduce the for_each_requested_gpio() macro to help in dependent
code all over the place. Also patch a few locations to use it while
we are at it.
- Split out the sysfs code into its own file.
- Split out the character device code into its own file, then make a
set of refactorings and improvements to this code. We are setting
the stage to revamp the userspace API a bit in the next cycle.
- Fix a whole slew of kerneldoc that was wrong or missing.
New drivers:
- The PCA953x driver now supports the PCAL9535.
Driver improvements:
- A host of incremental modernizations and improvements to the
PCA953x driver.
- Incremental improvements to the Xilinx Zynq driver.
- Some improvements to the GPIO aggregator driver.
- I ran all over the place switching all threaded and other drivers
requesting their own IRQ while using the core GPIO IRQ helpers to
pass the GPIO irq chip as a template instead of calling the
explicit set-up functions. Next merge window we may retire the old
code altogether"
* tag 'gpio-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (97 commits)
gpio: wcove: Request IRQ after all initialisation done
gpio: crystalcove: Free IRQ on error path
gpio: pca953x: Request IRQ after all initialisation done
gpio: don't use same lockdep class for all devm_gpiochip_add_data users
gpio: max732x: Use irqchip template
gpio: stmpe: Move chip registration
gpio: rcar: Use irqchip template
gpio: regmap: fix type clash
gpio: Correct kernel-doc inconsistency
gpio: pci-idio-16: Use irqchip template
gpio: pcie-idio-24: Use irqchip template
gpio: 104-idio-16: Use irqchip template
gpio: 104-idi-48: Use irqchip template
gpio: 104-dio-48e: Use irqchip template
gpio: ws16c48: Use irqchip template
gpio: omap: improve coding style for pin config flags
gpio: dln2: Use irqchip template
gpio: sch: Add a blank line between declaration and code
gpio: sch: changed every 'unsigned' to 'unsigned int'
gpio: ich: changed every 'unsigned' to 'unsigned int'
...
Here is the large set of USB and Thunderbolt patches for 5.9-rc1.
Nothing really magic/major in here, just lots of little changes and
updates:
- clean up language usages in USB core and some drivers
- Thunderbolt driver updates and additions
- USB Gadget driver updates
- dwc3 driver updates (like always...)
- build with "W=1" warning fixups
- mtu3 driver updates
- usb-serial driver updates and device ids
- typec additions and updates for new hardware
- xhci debug code updates for future platforms
- cdns3 driver updates
- lots of other minor driver updates and fixes and cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXymciA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylVVwCfU7JxgjFhAJTzC9K5efVqsrSHzxQAnijHrqUn
pHgI9M1ZRVGwmv2RNWb3
=9/8I
-----END PGP SIGNATURE-----
Merge tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the large set of USB and Thunderbolt patches for 5.9-rc1.
Nothing really magic/major in here, just lots of little changes and
updates:
- clean up language usages in USB core and some drivers
- Thunderbolt driver updates and additions
- USB Gadget driver updates
- dwc3 driver updates (like always...)
- build with "W=1" warning fixups
- mtu3 driver updates
- usb-serial driver updates and device ids
- typec additions and updates for new hardware
- xhci debug code updates for future platforms
- cdns3 driver updates
- lots of other minor driver updates and fixes and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (330 commits)
usb: common: usb-conn-gpio: Register charger
usb: mtu3: simplify mtu3_req_complete()
usb: mtu3: clear dual mode of u3port when disable device
usb: mtu3: use MTU3_EP_WEDGE flag
usb: mtu3: remove useless member @busy in mtu3_ep struct
usb: mtu3: remove repeated error log
usb: mtu3: add ->udc_set_speed()
usb: mtu3: introduce a funtion to check maximum speed
usb: mtu3: clear interrupts status when disable interrupts
usb: mtu3: reinitialize CSR registers
usb: mtu3: fix macro for maximum number of packets
usb: mtu3: remove unnecessary pointer checks
usb: xhci: Fix ASMedia ASM1142 DMA addressing
usb: xhci: define IDs for various ASMedia host controllers
usb: musb: convert to devm_platform_ioremap_resource_byname
usb: gadget: tegra-xudc: convert to devm_platform_ioremap_resource_byname
usb: gadget: r8a66597: convert to devm_platform_ioremap_resource_byname
usb: dwc3: convert to devm_platform_ioremap_resource_byname
usb: cdns3: convert to devm_platform_ioremap_resource_byname
usb: phy: am335x: convert to devm_platform_ioremap_resource_byname
...
Here is the large set of char and misc and other driver subsystem
patches for 5.9-rc1. Lots of new driver submissions in here, and
cleanups and features for existing drivers.
Highlights are:
- habanalabs driver updates
- coresight driver updates
- nvmem driver updates
- huge number of "W=1" build warning cleanups from Lee Jones
- dyndbg updates
- virtbox driver fixes and updates
- soundwire driver updates
- mei driver updates
- phy driver updates
- fpga driver updates
- lots of smaller individual misc/char driver cleanups and fixes
Full details are in the shortlog.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXylccQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymofgCfZ1CxNWd0ZVM0YIn8cY9gO6ON7MsAnRq48hvn
Vjf4rKM73GC11bVF4Gyy
=Xq1R
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
patches for 5.9-rc1. Lots of new driver submissions in here, and
cleanups and features for existing drivers.
Highlights are:
- habanalabs driver updates
- coresight driver updates
- nvmem driver updates
- huge number of "W=1" build warning cleanups from Lee Jones
- dyndbg updates
- virtbox driver fixes and updates
- soundwire driver updates
- mei driver updates
- phy driver updates
- fpga driver updates
- lots of smaller individual misc/char driver cleanups and fixes
Full details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits)
habanalabs: remove unused but set variable 'ctx_asid'
nvmem: qcom-spmi-sdam: Enable multiple devices
dt-bindings: nvmem: SID: add binding for A100's SID controller
nvmem: update Kconfig description
nvmem: qfprom: Add fuse blowing support
dt-bindings: nvmem: Add properties needed for blowing fuses
dt-bindings: nvmem: qfprom: Convert to yaml
nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances
nvmem: core: add support to auto devid
nvmem: core: Add nvmem_cell_read_u8()
nvmem: core: Grammar fixes for help text
nvmem: sc27xx: add sc2730 efuse support
nvmem: Enforce nvmem stride in the sysfs interface
MAINTAINERS: Add git tree for NVMEM FRAMEWORK
nvmem: sprd: Fix return value of sprd_efuse_probe()
drivers: android: Fix the SPDX comment style
drivers: android: Fix a variable declaration coding style issue
drivers: android: Remove braces for a single statement if-else block
drivers: android: Remove the use of else after return
drivers: android: Fix a variable declaration coding style issue
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl8od3oQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgppkpD/9D+XqD9qYcYTj+ShVCc5+3RtMG5ZiAAX0y
l4QXomentn/1Y0UYXFGJH7JLZWrKYT0QiktLtfpe5pmTqRUkckTIyJQlsHb+K6Dz
lFjtywRK9pcFYgiWIUg80wlJKrTa8QdnrlS/Esn4YITKGRbgMIdFvq2jymXC+1ho
RgodlgzcBUREgHSLo0H3cqEKA53fQiJhKC6CbFrFdrkpf2yUpcTfEDtpSwuIuPj3
2AUed1qXUtNjdHciCn3N37OuHqXKAA9noXAWfg9Gx/5zfGUNX9QJvlsny1AopgS0
jJvPSDVAhu/qRLHW6q/ZOT0JAlHegguuTAOtgMh2cMpAS5sumCAtltxVcI7Qnx41
HalMpTefXsVoBo0gfjqldnIPt34ZNj5aH5GYaH/wPpSg6VkTVBJK8GuQDBvg27qT
w+U/T6EzuqniWXh/P3COhfrMCR9ueUOY1qWCRwzomlpeIfBhCzidt2wUqIxX1TOA
Q0Ltf0eERDevsZbE+tIm+VAAg98kHehcS2t8lfFYFO6/PKu2iJpJt/HtJbZNBE+W
rm96E4qXRiy1UuL7D9vBkaWsbnosuNHgGQXx57GlokQU+2IGBmOxV52XHiSxxpXd
AS1ZTd56ItmID8VaU09Pbf7ZFbiCgdEAxIbUFzaCuvo+lxryHFphIUARNi/zPnNT
UC2OzunCqA==
=oADH
-----END PGP SIGNATURE-----
Merge tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe:
- ZNS support (Aravind, Keith, Matias, Niklas)
- Misc cleanups, optimizations, fixes (Baolin, Chaitanya, David,
Dongli, Max, Sagi)
- null_blk zone capacity support (Aravind)
- MD:
- raid5/6 fixes (ChangSyun)
- Warning fixes (Damien)
- raid5 stripe fixes (Guoqing, Song, Yufen)
- sysfs deadlock fix (Junxiao)
- raid10 deadlock fix (Vitaly)
- struct_size conversions (Gustavo)
- Set of bcache updates/fixes (Coly)
* tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block: (117 commits)
md/raid5: Allow degraded raid6 to do rmw
md/raid5: Fix Force reconstruct-write io stuck in degraded raid5
raid5: don't duplicate code for different paths in handle_stripe
raid5-cache: hold spinlock instead of mutex in r5c_journal_mode_show
md: print errno in super_written
md/raid5: remove the redundant setting of STRIPE_HANDLE
md: register new md sysfs file 'uuid' read-only
md: fix max sectors calculation for super 1.0
nvme-loop: remove extra variable in create ctrl
nvme-loop: set ctrl state connecting after init
nvme-multipath: do not fall back to __nvme_find_path() for non-optimized paths
nvme-multipath: fix logic for non-optimized paths
nvme-rdma: fix controller reset hang during traffic
nvme-tcp: fix controller reset hang during traffic
nvmet: introduce the passthru Kconfig option
nvmet: introduce the passthru configfs interface
nvmet: Add passthru enable/disable helpers
nvmet: add passthru code to process commands
nvme: export nvme_find_get_ns() and nvme_put_ns()
nvme: introduce nvme_ctrl_get_by_path()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXygcpgAKCRCRxhvAZXjc
ogPeAQDv1ncqtNroFAC4pJ4tQhH7JSjW0OltiMk/AocY/J2SdQD9GJ15luYJ0/om
697q/Z68sndRynhdoZlMuf3oYuBlHQw=
=3ZhE
-----END PGP SIGNATURE-----
Merge tag 'close-range-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull close_range() implementation from Christian Brauner:
"This adds the close_range() syscall. It allows to efficiently close a
range of file descriptors up to all file descriptors of a calling
task.
This is coordinated with the FreeBSD folks which have copied our
version of this syscall and in the meantime have already merged it in
April 2019:
https://reviews.freebsd.org/D21627https://svnweb.freebsd.org/base?view=revision&revision=359836
The syscall originally came up in a discussion around the new mount
API and making new file descriptor types cloexec by default. During
this discussion, Al suggested the close_range() syscall.
First, it helps to close all file descriptors of an exec()ing task.
This can be done safely via (quoting Al's example from [1] verbatim):
/* that exec is sensitive */
unshare(CLONE_FILES);
/* we don't want anything past stderr here */
close_range(3, ~0U);
execve(....);
The code snippet above is one way of working around the problem that
file descriptors are not cloexec by default. This is aggravated by the
fact that we can't just switch them over without massively regressing
userspace. For a whole class of programs having an in-kernel method of
closing all file descriptors is very helpful (e.g. demons, service
managers, programming language standard libraries, container managers
etc.).
Second, it allows userspace to avoid implementing closing all file
descriptors by parsing through /proc/<pid>/fd/* and calling close() on
each file descriptor and other hacks. From looking at various
large(ish) userspace code bases this or similar patterns are very
common in service managers, container runtimes, and programming
language runtimes/standard libraries such as Python or Rust.
In addition, the syscall will also work for tasks that do not have
procfs mounted and on kernels that do not have procfs support compiled
in. In such situations the only way to make sure that all file
descriptors are closed is to call close() on each file descriptor up
to UINT_MAX or RLIMIT_NOFILE, OPEN_MAX trickery.
Based on Linus' suggestion close_range() also comes with a new flag
CLOSE_RANGE_UNSHARE to more elegantly handle file descriptor dropping
right before exec. This would usually be expressed in the sequence:
unshare(CLONE_FILES);
close_range(3, ~0U);
as pointed out by Linus it might be desirable to have this be a part
of close_range() itself under a new flag CLOSE_RANGE_UNSHARE which
gets especially handy when we're closing all file descriptors above a
certain threshold.
Test-suite as always included"
* tag 'close-range-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: add CLOSE_RANGE_UNSHARE tests
close_range: add CLOSE_RANGE_UNSHARE
tests: add close_range() tests
arch: wire-up close_range()
open: add close_range()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXygegQAKCRCRxhvAZXjc
olWZAQCMPbhI/20LA3OYJ6s+BgBEnm89PymvlHcym6Z4AvTungD+KqZonIYuxWgi
6Ttlv/fzgFFbXgJgbuass5mwFVoN5wM=
=oK7d
-----END PGP SIGNATURE-----
Merge tag 'cap-checkpoint-restore-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull checkpoint-restore updates from Christian Brauner:
"This enables unprivileged checkpoint/restore of processes.
Given that this work has been going on for quite some time the first
sentence in this summary is hopefully more exciting than the actual
final code changes required. Unprivileged checkpoint/restore has seen
a frequent increase in interest over the last two years and has thus
been one of the main topics for the combined containers &
checkpoint/restore microconference since at least 2018 (cf. [1]).
Here are just the three most frequent use-cases that were brought forward:
- The JVM developers are integrating checkpoint/restore into a Java
VM to significantly decrease the startup time.
- In high-performance computing environment a resource manager will
typically be distributing jobs where users are always running as
non-root. Long-running and "large" processes with significant
startup times are supposed to be checkpointed and restored with
CRIU.
- Container migration as a non-root user.
In all of these scenarios it is either desirable or required to run
without CAP_SYS_ADMIN. The userspace implementation of
checkpoint/restore CRIU already has the pull request for supporting
unprivileged checkpoint/restore up (cf. [2]).
To enable unprivileged checkpoint/restore a new dedicated capability
CAP_CHECKPOINT_RESTORE is introduced. This solution has last been
discussed in 2019 in a talk by Google at Linux Plumbers (cf. [1]
"Update on Task Migration at Google Using CRIU") with Adrian and
Nicolas providing the implementation now over the last months. In
essence, this allows the CRIU binary to be installed with the
CAP_CHECKPOINT_RESTORE vfs capability set thereby enabling
unprivileged users to restore processes.
To make this possible the following permissions are altered:
- Selecting a specific PID via clone3() set_tid relaxed from userns
CAP_SYS_ADMIN to CAP_CHECKPOINT_RESTORE.
- Selecting a specific PID via /proc/sys/kernel/ns_last_pid relaxed
from userns CAP_SYS_ADMIN to CAP_CHECKPOINT_RESTORE.
- Accessing /proc/pid/map_files relaxed from init userns
CAP_SYS_ADMIN to init userns CAP_CHECKPOINT_RESTORE.
- Changing /proc/self/exe from userns CAP_SYS_ADMIN to userns
CAP_CHECKPOINT_RESTORE.
Of these four changes the /proc/self/exe change deserves a few words
because the reasoning behind even restricting /proc/self/exe changes
in the first place is just full of historical quirks and tracking this
down was a questionable version of fun that I'd like to spare others.
In short, it is trivial to change /proc/self/exe as an unprivileged
user, i.e. without userns CAP_SYS_ADMIN right now. Either via ptrace()
or by simply intercepting the elf loader in userspace during exec.
Nicolas was nice enough to even provide a POC for the latter (cf. [3])
to illustrate this fact.
The original patchset which introduced PR_SET_MM_MAP had no
permissions around changing the exe link. They too argued that it is
trivial to spoof the exe link already which is true. The argument
brought up against this was that the Tomoyo LSM uses the exe link in
tomoyo_manager() to detect whether the calling process is a policy
manager. This caused changing the exe links to be guarded by userns
CAP_SYS_ADMIN.
All in all this rather seems like a "better guard it with something
rather than nothing" argument which imho doesn't qualify as a great
security policy. Again, because spoofing the exe link is possible for
the calling process so even if this were security relevant it was
broken back then and would be broken today. So technically, dropping
all permissions around changing the exe link would probably be
possible and would send a clearer message to any userspace that relies
on /proc/self/exe for security reasons that they should stop doing
this but for now we're only relaxing the exe link permissions from
userns CAP_SYS_ADMIN to userns CAP_CHECKPOINT_RESTORE.
There's a final uapi change in here. Changing the exe link used to
accidently return EINVAL when the caller lacked the necessary
permissions instead of the more correct EPERM. This pr contains a
commit fixing this. I assume that userspace won't notice or care and
if they do I will revert this commit. But since we are changing the
permissions anyway it seems like a good opportunity to try this fix.
With these changes merged unprivileged checkpoint/restore will be
possible and has already been tested by various users"
[1] LPC 2018
1. "Task Migration at Google Using CRIU"
https://www.youtube.com/watch?v=yI_1cuhoDgA&t=12095
2. "Securely Migrating Untrusted Workloads with CRIU"
https://www.youtube.com/watch?v=yI_1cuhoDgA&t=14400
LPC 2019
1. "CRIU and the PID dance"
https://www.youtube.com/watch?v=LN2CUgp8deo&list=PLVsQ_xZBEyN30ZA3Pc9MZMFzdjwyz26dO&index=9&t=2m48s
2. "Update on Task Migration at Google Using CRIU"
https://www.youtube.com/watch?v=LN2CUgp8deo&list=PLVsQ_xZBEyN30ZA3Pc9MZMFzdjwyz26dO&index=9&t=1h2m8s
[2] https://github.com/checkpoint-restore/criu/pull/1155
[3] https://github.com/nviennot/run_as_exe
* tag 'cap-checkpoint-restore-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
selftests: add clone3() CAP_CHECKPOINT_RESTORE test
prctl: exe link permission error changed from -EINVAL to -EPERM
prctl: Allow local CAP_CHECKPOINT_RESTORE to change /proc/self/exe
proc: allow access in init userns for map_files with CAP_CHECKPOINT_RESTORE
pid_namespace: use checkpoint_restore_ns_capable() for ns_last_pid
pid: use checkpoint_restore_ns_capable() for set_tid
capabilities: Introduce CAP_CHECKPOINT_RESTORE
-----BEGIN PGP SIGNATURE-----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=Xs3M
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20200803' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Aside from some smaller bug fixes, here are the highlights:
- add a new backlog wait metric to the audit status message, this is
intended to help admins determine how long processes have been
waiting for the audit backlog queue to clear
- generate audit records for nftables configuration changes
- generate CWD audit records for for the relevant LSM audit records"
* tag 'audit-pr-20200803' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: report audit wait metric in audit status reply
audit: purge audit_log_string from the intra-kernel audit API
audit: issue CWD record to accompany LSM_AUDIT_DATA_* records
audit: use the proper gfp flags in the audit_log_nfcfg() calls
audit: remove unused !CONFIG_AUDITSYSCALL __audit_inode* stubs
audit: add gfp parameter to audit_log_nfcfg
audit: log nftables configuration change events
audit: Use struct_size() helper in alloc_chunk
- Improved selftest coverage, timeouts, and reporting
- Add EPOLLHUP support for SECCOMP_RET_USER_NOTIF (Christian Brauner)
- Refactor __scm_install_fd() into __receive_fd() and fix buggy callers
- Introduce "addfd" command for SECCOMP_RET_USER_NOTIF (Sargun Dhillon)
-----BEGIN PGP SIGNATURE-----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=yb55
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"There are a bunch of clean ups and selftest improvements along with
two major updates to the SECCOMP_RET_USER_NOTIF filter return:
EPOLLHUP support to more easily detect the death of a monitored
process, and being able to inject fds when intercepting syscalls that
expect an fd-opening side-effect (needed by both container folks and
Chrome). The latter continued the refactoring of __scm_install_fd()
started by Christoph, and in the process found and fixed a handful of
bugs in various callers.
- Improved selftest coverage, timeouts, and reporting
- Add EPOLLHUP support for SECCOMP_RET_USER_NOTIF (Christian Brauner)
- Refactor __scm_install_fd() into __receive_fd() and fix buggy
callers
- Introduce 'addfd' command for SECCOMP_RET_USER_NOTIF (Sargun
Dhillon)"
* tag 'seccomp-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits)
selftests/seccomp: Test SECCOMP_IOCTL_NOTIF_ADDFD
seccomp: Introduce addfd ioctl to seccomp user notifier
fs: Expand __receive_fd() to accept existing fd
pidfd: Replace open-coded receive_fd()
fs: Add receive_fd() wrapper for __receive_fd()
fs: Move __scm_install_fd() to __receive_fd()
net/scm: Regularize compat handling of scm_detach_fds()
pidfd: Add missing sock updates for pidfd_getfd()
net/compat: Add missing sock updates for SCM_RIGHTS
selftests/seccomp: Check ENOSYS under tracing
selftests/seccomp: Refactor to use fixture variants
selftests/harness: Clean up kern-doc for fixtures
seccomp: Use -1 marker for end of mode 1 syscall list
seccomp: Fix ioctl number for SECCOMP_IOCTL_NOTIF_ID_VALID
selftests/seccomp: Rename user_trap_syscall() to user_notif_syscall()
selftests/seccomp: Make kcmp() less required
seccomp: Use pr_fmt
selftests/seccomp: Improve calibration loop
selftests/seccomp: use 90s as timeout
selftests/seccomp: Expand benchmark to per-filter measurements
...
* ASUS WMI driver honors BAT1 name of the battery
(quite a few new laptops are using it)
* Dell WMI driver supports new key codes and backlight events
* ThinkPad ACPI driver now may use standard charge threshold interface,
it also has been updated to provide Laptop or Desktop mode to the user
* Intel Speed Select Technology gained support on Sapphire Rapids platform
* Regular update of Speed Select Technology tools
* Mellanox has been updated to support complex attributes
* PMC core driver has been fixed to show correct names for LPM0 register
* HTTP links were replaced by HTTPS ones where it applies
* Miscellaneous fixes and cleanups here and there
The following is an automated git shortlog grouped by driver:
acerhdf:
- Replace HTTP links with HTTPS ones
Add new intel_atomisp2_led driver:
- Add new intel_atomisp2_led driver
apple-gmux:
- Replace HTTP links with HTTPS ones
asus-nb-wmi:
- Drop duplicate DMI quirk structures
- add support for ASUS ROG Zephyrus G14 and G15
asus-wmi:
- allow BAT1 battery name
dell-wmi:
- add new dmi mapping for keycode 0xffff
- add new keymap type 0x0012
- add new backlight events
intel_cht_int33fe:
- Drop double check for ACPI companion device
intel-hid:
- Fix return value check in check_acpi_dev()
intel_pmc_core:
- fix bound check in pmc_core_mphy_pg_show()
- update TGL's LPM0 reg bit map name
intel-vbtn:
- Fix return value check in check_acpi_dev()
ISST:
- drop a duplicated word in isst_if.h
- Add new PCI device ids
pcengines-apuv2:
- revert wiring up simswitch GPIO as LED
platform/mellanox:
- Introduce string_upper() and string_lower() helpers
- Add string_upper() and string_lower() tests
- Extend FAN platform data description
- Add more definitions for system attributes
- Add new attribute for mlxreg-io sysfs interfaces
- Add presence register field for FAN devices
- Add support for complex attributes
- mlxreg-io: Add support for complex attributes
- mlxreg-hotplug: Add environmental data to uevent
- mlxreg-hotplug: Use capability register for attribute creation
- mlxreg-hotplug: Modify module license
system76-acpi:
- Fix brightness_set schedule while atomic
thinkpad_acpi:
- Make some symbols static
- add documentation for battery charge control
- use standard charge control attribute names
- remove unused defines
- Replace HTTP links with HTTPS ones
- not loading brightness_init when _BCL invalid
- lap or desk mode interface
- Revert "Use strndup_user() in dispatch_proc_write()"
tools/power/x86/intel-speed-select:
- Update version for v5.9
- Add retries for mail box commands
- Add option to delay mbox commands
- Ignore -o option processing on error
- Change path for caching topology info
-----BEGIN PGP SIGNATURE-----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=yvnW
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.9-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- ASUS WMI driver honors BAT1 name of the battery (quite a few new
laptops are using it)
- Dell WMI driver supports new key codes and backlight events
- ThinkPad ACPI driver now may use standard charge threshold interface,
it also has been updated to provide Laptop or Desktop mode to the
user
- Intel Speed Select Technology gained support on Sapphire Rapids
platform
- Regular update of Speed Select Technology tools
- Mellanox has been updated to support complex attributes
- PMC core driver has been fixed to show correct names for LPM0
register
- HTTP links were replaced by HTTPS ones where it applies
- Miscellaneous fixes and cleanups here and there
* tag 'platform-drivers-x86-v5.9-1' of git://git.infradead.org/linux-platform-drivers-x86: (42 commits)
platform/x86: asus-nb-wmi: Drop duplicate DMI quirk structures
platform/x86: thinkpad_acpi: Make some symbols static
platform/x86: thinkpad_acpi: add documentation for battery charge control
platform/x86: thinkpad_acpi: use standard charge control attribute names
platform/x86: thinkpad_acpi: remove unused defines
platform/x86: ISST: drop a duplicated word in isst_if.h
tools/power/x86/intel-speed-select: Update version for v5.9
tools/power/x86/intel-speed-select: Add retries for mail box commands
tools/power/x86/intel-speed-select: Add option to delay mbox commands
tools/power/x86/intel-speed-select: Ignore -o option processing on error
tools/power/x86/intel-speed-select: Change path for caching topology info
platform/x86: acerhdf: Replace HTTP links with HTTPS ones
platform/x86: apple-gmux: Replace HTTP links with HTTPS ones
platform/x86: pcengines-apuv2: revert wiring up simswitch GPIO as LED
platform/x86: mlx-platform: Extend FAN platform data description
platform_data/mlxreg: Add presence register field for FAN devices
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform/mellanox: mlxreg-io: Add support for complex attributes
platform/x86: mlx-platform: Add more definitions for system attributes
platform_data/mlxreg: Add support for complex attributes
...
- Add uncore support for Intel Comet Lake
- Add RAPL support for Hygon Fam18h
- Add Intel "IIO stack to PMON mapping" support on Skylake-SP CPUs,
which enumerates per device performance counters via sysfs and enables
the perf stat --iiostat functionality
- Add support for Intel "Architectural LBRs", which generalized the model
specific LBR hardware tracing feature into a model-independent, architected
performance monitoring feature. Usage is mostly seamless to tooling, as the
pre-existing LBR features are kept, but there's a couple of advantages
under the hood, such as faster context-switching, faster LBR reads,
cleaner exposure of LBR features to guest kernels, etc.
( Since architectural LBRs are supported via XSAVE, there's related
changes to the x86 FPU code as well. )
- ftrace/perf updates: Add support to add a text poke event to record changes
to kernel text (i.e. self-modifying code) in order to
support tracers like Intel PT decoding through
jump labels, kprobes and ftrace trampolines.
- Misc cleanups, smaller fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=4pKU
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event updates from Ingo Molnar:
"HW support updates:
- Add uncore support for Intel Comet Lake
- Add RAPL support for Hygon Fam18h
- Add Intel "IIO stack to PMON mapping" support on Skylake-SP CPUs,
which enumerates per device performance counters via sysfs and
enables the perf stat --iiostat functionality
- Add support for Intel "Architectural LBRs", which generalized the
model specific LBR hardware tracing feature into a
model-independent, architected performance monitoring feature.
Usage is mostly seamless to tooling, as the pre-existing LBR
features are kept, but there's a couple of advantages under the
hood, such as faster context-switching, faster LBR reads, cleaner
exposure of LBR features to guest kernels, etc.
( Since architectural LBRs are supported via XSAVE, there's related
changes to the x86 FPU code as well. )
ftrace/perf updates:
- Add support to add a text poke event to record changes to kernel
text (i.e. self-modifying code) in order to support tracers like
Intel PT decoding through jump labels, kprobes and ftrace
trampolines.
Misc cleanups, smaller fixes..."
* tag 'perf-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
perf/x86/rapl: Add Hygon Fam18h RAPL support
kprobes: Remove unnecessary module_mutex locking from kprobe_optimizer()
x86/perf: Fix a typo
perf: <linux/perf_event.h>: drop a duplicated word
perf/x86/intel/lbr: Support XSAVES for arch LBR read
perf/x86/intel/lbr: Support XSAVES/XRSTORS for LBR context switch
x86/fpu/xstate: Add helpers for LBR dynamic supervisor feature
x86/fpu/xstate: Support dynamic supervisor feature for LBR
x86/fpu: Use proper mask to replace full instruction mask
perf/x86: Remove task_ctx_size
perf/x86/intel/lbr: Create kmem_cache for the LBR context data
perf/core: Use kmem_cache to allocate the PMU specific data
perf/core: Factor out functions to allocate/free the task_ctx_data
perf/x86/intel/lbr: Support Architectural LBR
perf/x86/intel/lbr: Factor out intel_pmu_store_lbr
perf/x86/intel/lbr: Factor out rdlbr_all() and wrlbr_all()
perf/x86/intel/lbr: Mark the {rd,wr}lbr_{to,from} wrappers __always_inline
perf/x86/intel/lbr: Unify the stored format of LBR information
perf/x86/intel/lbr: Support LBR_CTL
perf/x86: Expose CPUID enumeration bits for arch LBR
...
- Removal of the tremendously unpopular read_barrier_depends() barrier,
which is a NOP on all architectures apart from Alpha, in favour of
allowing architectures to override READ_ONCE() and do whatever dance
they need to do to ensure address dependencies provide LOAD ->
LOAD/STORE ordering. This work also offers a potential solution if
compilers are shown to convert LOAD -> LOAD address dependencies into
control dependencies (e.g. under LTO), as weakly ordered architectures
will effectively be able to upgrade READ_ONCE() to smp_load_acquire().
The latter case is not used yet, but will be discussed further at LPC.
- Make the MSI/IOMMU input/output ID translation PCI agnostic, augment
the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID
bus-specific parameter and apply the resulting changes to the device
ID space provided by the Freescale FSL bus.
- arm64 support for TLBI range operations and translation table level
hints (part of the ARMv8.4 architecture version).
- Time namespace support for arm64.
- Export the virtual and physical address sizes in vmcoreinfo for
makedumpfile and crash utilities.
- CPU feature handling cleanups and checks for programmer errors
(overlapping bit-fields).
- ACPI updates for arm64: disallow AML accesses to EFI code regions and
kernel memory.
- perf updates for arm64.
- Miscellaneous fixes and cleanups, most notably PLT counting
optimisation for module loading, recordmcount fix to ignore
relocations other than R_AARCH64_CALL26, CMA areas reserved for
gigantic pages on 16K and 64K configurations.
- Trivial typos, duplicate words.
-----BEGIN PGP SIGNATURE-----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=mh79
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 and cross-arch updates from Catalin Marinas:
"Here's a slightly wider-spread set of updates for 5.9.
Going outside the usual arch/arm64/ area is the removal of
read_barrier_depends() series from Will and the MSI/IOMMU ID
translation series from Lorenzo.
The notable arm64 updates include ARMv8.4 TLBI range operations and
translation level hint, time namespace support, and perf.
Summary:
- Removal of the tremendously unpopular read_barrier_depends()
barrier, which is a NOP on all architectures apart from Alpha, in
favour of allowing architectures to override READ_ONCE() and do
whatever dance they need to do to ensure address dependencies
provide LOAD -> LOAD/STORE ordering.
This work also offers a potential solution if compilers are shown
to convert LOAD -> LOAD address dependencies into control
dependencies (e.g. under LTO), as weakly ordered architectures will
effectively be able to upgrade READ_ONCE() to smp_load_acquire().
The latter case is not used yet, but will be discussed further at
LPC.
- Make the MSI/IOMMU input/output ID translation PCI agnostic,
augment the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID
bus-specific parameter and apply the resulting changes to the
device ID space provided by the Freescale FSL bus.
- arm64 support for TLBI range operations and translation table level
hints (part of the ARMv8.4 architecture version).
- Time namespace support for arm64.
- Export the virtual and physical address sizes in vmcoreinfo for
makedumpfile and crash utilities.
- CPU feature handling cleanups and checks for programmer errors
(overlapping bit-fields).
- ACPI updates for arm64: disallow AML accesses to EFI code regions
and kernel memory.
- perf updates for arm64.
- Miscellaneous fixes and cleanups, most notably PLT counting
optimisation for module loading, recordmcount fix to ignore
relocations other than R_AARCH64_CALL26, CMA areas reserved for
gigantic pages on 16K and 64K configurations.
- Trivial typos, duplicate words"
Link: http://lkml.kernel.org/r/20200710165203.31284-1-will@kernel.org
Link: http://lkml.kernel.org/r/20200619082013.13661-1-lorenzo.pieralisi@arm.com
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (82 commits)
arm64: use IRQ_STACK_SIZE instead of THREAD_SIZE for irq stack
arm64/mm: save memory access in check_and_switch_context() fast switch path
arm64: sigcontext.h: delete duplicated word
arm64: ptrace.h: delete duplicated word
arm64: pgtable-hwdef.h: delete duplicated words
bus: fsl-mc: Add ACPI support for fsl-mc
bus/fsl-mc: Refactor the MSI domain creation in the DPRC driver
of/irq: Make of_msi_map_rid() PCI bus agnostic
of/irq: make of_msi_map_get_device_domain() bus agnostic
dt-bindings: arm: fsl: Add msi-map device-tree binding for fsl-mc bus
of/device: Add input id to of_dma_configure()
of/iommu: Make of_map_rid() PCI agnostic
ACPI/IORT: Add an input ID to acpi_dma_configure()
ACPI/IORT: Remove useless PCI bus walk
ACPI/IORT: Make iort_msi_map_rid() PCI agnostic
ACPI/IORT: Make iort_get_device_domain IRQ domain agnostic
ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NC
arm64: enable time namespace support
arm64/vdso: Restrict splitting VVAR VMA
arm64/vdso: Handle faults on timens page
...
-----BEGIN PGP SIGNATURE-----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=2vmy
-----END PGP SIGNATURE-----
Merge tag 'for-5.9/io_uring-20200802' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
"Lots of cleanups in here, hardening the code and/or making it easier
to read and fixing bugs, but a core feature/change too adding support
for real async buffered reads. With the latter in place, we just need
buffered write async support and we're done relying on kthreads for
the fast path. In detail:
- Cleanup how memory accounting is done on ring setup/free (Bijan)
- sq array offset calculation fixup (Dmitry)
- Consistently handle blocking off O_DIRECT submission path (me)
- Support proper async buffered reads, instead of relying on kthread
offload for that. This uses the page waitqueue to drive retries
from task_work, like we handle poll based retry. (me)
- IO completion optimizations (me)
- Fix race with accounting and ring fd install (me)
- Support EPOLLEXCLUSIVE (Jiufei)
- Get rid of the io_kiocb unionizing, made possible by shrinking
other bits (Pavel)
- Completion side cleanups (Pavel)
- Cleanup REQ_F_ flags handling, and kill off many of them (Pavel)
- Request environment grabbing cleanups (Pavel)
- File and socket read/write cleanups (Pavel)
- Improve kiocb_set_rw_flags() (Pavel)
- Tons of fixes and cleanups (Pavel)
- IORING_SQ_NEED_WAKEUP clear fix (Xiaoguang)"
* tag 'for-5.9/io_uring-20200802' of git://git.kernel.dk/linux-block: (127 commits)
io_uring: flip if handling after io_setup_async_rw
fs: optimise kiocb_set_rw_flags()
io_uring: don't touch 'ctx' after installing file descriptor
io_uring: get rid of atomic FAA for cq_timeouts
io_uring: consolidate *_check_overflow accounting
io_uring: fix stalled deferred requests
io_uring: fix racy overflow count reporting
io_uring: deduplicate __io_complete_rw()
io_uring: de-unionise io_kiocb
io-wq: update hash bits
io_uring: fix missing io_queue_linked_timeout()
io_uring: mark ->work uninitialised after cleanup
io_uring: deduplicate io_grab_files() calls
io_uring: don't do opcode prep twice
io_uring: clear IORING_SQ_NEED_WAKEUP after executing task works
io_uring: batch put_task_struct()
tasks: add put_task_struct_many()
io_uring: return locked and pinned page accounting
io_uring: don't miscount pinned memory
io_uring: don't open-code recv kbuf managment
...
Drop the repeated word "for" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add retrieval of the filesystem's metadata UUID to the fsinfo ioctl.
This is driven by setting the BTRFS_FS_INFO_FLAG_METADATA_UUID flag in
btrfs_ioctl_fs_info_args::flags.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add retrieval of the filesystem's generation to the fsinfo ioctl. This is
driven by setting the BTRFS_FS_INFO_FLAG_GENERATION flag in
btrfs_ioctl_fs_info_args::flags.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the recent addition of filesystem checksum types other than CRC32c,
it is not anymore hard-coded which checksum type a btrfs filesystem uses.
Up to now there is no good way to read the filesystem checksum, apart from
reading the filesystem UUID and then query sysfs for the checksum type.
Add a new csum_type and csum_size fields to the BTRFS_IOC_FS_INFO ioctl
command which usually is used to query filesystem features. Also add a
flags member indicating that the kernel responded with a set csum_type and
csum_size field.
For compatibility reasons, only return the csum_type and csum_size if
the BTRFS_FS_INFO_FLAG_CSUM_INFO flag was passed to the kernel. Also
clear any unknown flags so we don't pass false positives to user-space
newer than the kernel.
To simplify further additions to the ioctl, also switch the padding to a
u8 array. Pahole was used to verify the result of this switch:
The csum members are added before flags, which might look odd, but this
is to keep the alignment requirements and not to introduce holes in the
structure.
$ pahole -C btrfs_ioctl_fs_info_args fs/btrfs/btrfs.ko
struct btrfs_ioctl_fs_info_args {
__u64 max_id; /* 0 8 */
__u64 num_devices; /* 8 8 */
__u8 fsid[16]; /* 16 16 */
__u32 nodesize; /* 32 4 */
__u32 sectorsize; /* 36 4 */
__u32 clone_alignment; /* 40 4 */
__u16 csum_type; /* 44 2 */
__u16 csum_size; /* 46 2 */
__u64 flags; /* 48 8 */
__u8 reserved[968]; /* 56 968 */
/* size: 1024, cachelines: 16, members: 10 */
};
Fixes: 3951e7f050 ("btrfs: add xxhash64 to checksumming algorithms")
Fixes: 3831bf0094 ("btrfs: add sha256 to checksumming algorithm")
CC: stable@vger.kernel.org # 5.5+
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The qgroup level is limited to u16, so no need to use u64 for it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The large bucket feature is to extend bucket_size from 16bit to 32bit.
When create cache device on zoned device (e.g. zoned NVMe SSD), making
a single bucket cover one or more zones of the zoned device is the
simplest way to support zoned device as cache by bcache.
But current maximum bucket size is 16MB and a typical zone size of zoned
device is 256MB, this is the major motiviation to extend bucket size to
a larger bit width.
This patch is the basic and first change to support large bucket size,
the major changes it makes are,
- Add BCH_FEATURE_INCOMPAT_LARGE_BUCKET for the large bucket feature,
INCOMPAT means it introduces incompatible on-disk format change.
- Add BCH_FEATURE_INCOMPAT_FUNCS(large_bucket, LARGE_BUCKET) routines.
- Adds __le16 bucket_size_hi into struct cache_sb_disk at offset 0x8d0
for the on-disk super block format.
- For the in-memory super block struct cache_sb, member bucket_size is
extended from __u16 to __32.
- Add get_bucket_size() to combine the bucket_size and bucket_size_hi
from struct cache_sb_disk into an unsigned int value.
Since we already have large bucket size helpers meta_bucket_pages(),
meta_bucket_bytes() and alloc_meta_bucket_pages(), they make sure when
bucket size > 8MB, the memory allocation for bcache meta data bucket
won't fail no matter how large the bucket size extended. So these meta
data buckets are handled properly when the bucket size width increase
from 16bit to 32bit, we don't need to worry about them.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have struct cache_sb_disk for on-disk super block already, it is
unnecessary to keep the in-memory super block format exactly mapping
to the on-disk struct layout.
This patch adds code comments to notice that struct cache_sb is not
exactly mapping to cache_sb_disk, and removes the useless member csum
and pad[5].
Although struct cache_sb does not belong to uapi, but there are still
some on-disk format related macros reference it and it is unncessary to
get rid of such dependency now. So struct cache_sb will continue to stay
in include/uapi/linux/bache.h for now.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The new added super block version BCACHE_SB_VERSION_BDEV_WITH_FEATURES
(5) BCACHE_SB_VERSION_CDEV_WITH_FEATURES value (6), is for the feature
set bits.
Devices have super block version equal to the new version will have
three new members for feature set bits in the on-disk super block,
__le64 feature_compat;
__le64 feature_incompat;
__le64 feature_ro_compat;
They are used for further new features which may introduce on-disk
format change, and avoid unncessary super block version increase.
The very basic features handling code skeleton is also initialized in
this patch.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge in io_uring-5.8 fixes, as changes/cleanups to how we do locked
mem accounting require a fixup, and only one of the spots are noticed
by git as the other merges cleanly. The flags fix from io_uring-5.8
also causes a merge conflict, the leak fix for recvmsg, the double poll
fix, and the link failure locking fix.
* io_uring-5.8:
io_uring: fix lockup in io_fail_links()
io_uring: fix ->work corruption with poll_add
io_uring: missed req_init_async() for IOSQE_ASYNC
io_uring: always allow drain/link/hardlink/async sqe flags
io_uring: ensure double poll additions work with both request types
io_uring: fix recvmsg memory leak with buffer selection
io_uring: fix not initialised work->flags
io_uring: fix missing msg_name assignment
io_uring: account user memory freed when exit has been queued
io_uring: fix memleak in io_sqe_files_register()
io_uring: fix memleak in __io_sqe_files_update()
io_uring: export cq overflow status to userspace
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Here is the (slightly larger than usual) patch set for the 5.9-rc1 merge
window.
DFL:
- Xu's changes add support for AFU interrupt handling and puts them to
use for error handling.
- Xu's other change also adds another device-id for the Intel FPGA PAC N3000.
- John's change converts from using get_user_pages() to
pin_user_pages().
- Gustavo's patch cleans up some of the allocation by using
struct_size().
Xilinx:
- Luca's changes clean up the xilinx-spi and xilinx-slave-serial drivers
and updates the comments and dt-bindings to reflect the fact it also
supports 7 series devices.
Core:
- Tom cleaned up the fpga-bridge / fpga-mgr core by removing some
dead-stores.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my for-next branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIUEABYIAC0WIQRORt0E5Sb/c/mZMgkXxQAtim5VSwUCXxJbZQ8cbWRmQGtlcm5l
bC5vcmcACgkQF8UALYpuVUsAIgD/eMm7y2Kgw0vnteTR4diLH0T8isv24ZjgRNL1
2FpscKsBAIp7XJUF9z1I85D476GAlArbxGK8BpscbKPJVw3mP9AC
=Owcl
-----END PGP SIGNATURE-----
Merge tag 'fpga-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next
Moritz writes:
FPGA Manager changes for 5.9-rc1
Here is the (slightly larger than usual) patch set for the 5.9-rc1 merge
window.
DFL:
- Xu's changes add support for AFU interrupt handling and puts them to
use for error handling.
- Xu's other change also adds another device-id for the Intel FPGA PAC N3000.
- John's change converts from using get_user_pages() to
pin_user_pages().
- Gustavo's patch cleans up some of the allocation by using
struct_size().
Xilinx:
- Luca's changes clean up the xilinx-spi and xilinx-slave-serial drivers
and updates the comments and dt-bindings to reflect the fact it also
supports 7 series devices.
Core:
- Tom cleaned up the fpga-bridge / fpga-mgr core by removing some
dead-stores.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my for-next branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
fpga: dfl: pci: add device id for Intel FPGA PAC N3000
Documentation: fpga: dfl: add descriptions for interrupt related interfaces.
fpga: dfl: afu: add AFU interrupt support
fpga: dfl: fme: add interrupt support for global error reporting
fpga: dfl: afu: add interrupt support for port error reporting
fpga: dfl: introduce interrupt trigger setting API
fpga: dfl: pci: add irq info for feature devices enumeration
fpga: dfl: parse interrupt info for feature devices on enumeration
fpga manager: xilinx-spi: check INIT_B pin during write_init
dt-bindings: fpga: xilinx-slave-serial: add optional INIT_B GPIO
fpga: Fix dead store in fpga-bridge.c
fpga: Fix dead store fpga-mgr.c
fpga: dfl: Use struct_size() in kzalloc()
fpga manager: xilinx-spi: remove unneeded, mistyped variables
fpga manager: xilinx-spi: valid for the 7 Series too
dt-bindings: fpga: xilinx-slave-serial: valid for the 7 Series too
fpga: dfl: afu: convert get_user_pages() --> pin_user_pages()
Drop the doubled word "the" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: linux-raid@vger.kernel.org
Signed-off-by: Song Liu <songliubraving@fb.com>
In environments where the preservation of audit events and predictable
usage of system memory are prioritized, admins may use a combination of
--backlog_wait_time and -b options at the risk of degraded performance
resulting from backlog waiting. In some cases, this risk may be
preferred to lost events or unbounded memory usage. Ideally, this risk
can be mitigated by making adjustments when backlog waiting is detected.
However, detection can be difficult using the currently available
metrics. For example, an admin attempting to debug degraded performance
may falsely believe a full backlog indicates backlog waiting. It may
turn out the backlog frequently fills up but drains quickly.
To make it easier to reliably track degraded performance to backlog
waiting, this patch makes the following changes:
Add a new field backlog_wait_time_total to the audit status reply.
Initialize this field to zero. Add to this field the total time spent
by the current task on scheduled timeouts while the backlog limit is
exceeded. Reset field to zero upon request via AUDIT_SET.
Tested on Ubuntu 18.04 using complementary changes to the
audit-userspace and audit-testsuite:
- https://github.com/linux-audit/audit-userspace/pull/134
- https://github.com/linux-audit/audit-testsuite/pull/97
Signed-off-by: Max Englander <max.englander@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
In order to support short clock counters, provide an ABI extension.
As a whole:
u64 time, delta, cyc = read_cycle_counter();
+ if (cap_user_time_short)
+ cyc = time_cycle + ((cyc - time_cycle) & time_mask);
delta = mul_u64_u32_shr(cyc, time_mult, time_shift);
if (cap_user_time_zero)
time = time_zero + delta;
delta += time_offset;
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20200716051130.4359-6-leo.yan@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8UzA4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGQ7cH/3v+Gv+SmHJCvaT2
CSu0+7okVnYbY3UTb3hykk7/aOqb6284KjxR03r0CWFzsEsZVhC5pvvruASSiMQg
Pi04sLqv6CsGLHd1n+pl4AUYEaxq6k4KS3uU3HHSWxrahDDApQoRUx2F8lpOxyj8
RiwnoO60IMPA7IFJqzcZuFqsgdxqiiYvnzT461KX8Mrw6fyMXeR2KAj2NwMX8dZN
At21Sf8+LSoh6q2HnugfiUd/jR10XbfxIIx2lXgIinb15GXgWydEQVrDJ7cUV7ix
Jd0S+dtOtp+lWtFHDoyjjqqsMV7+G8i/rFNZoxSkyZqsUTaKzaR6JD3moSyoYZgG
0+eXO4A=
=9EpR
-----END PGP SIGNATURE-----
Merge 5.8-rc6 into usb-next
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces CAP_CHECKPOINT_RESTORE, a new capability facilitating
checkpoint/restore for non-root users.
Over the last years, The CRIU (Checkpoint/Restore In Userspace) team has
been asked numerous times if it is possible to checkpoint/restore a
process as non-root. The answer usually was: 'almost'.
The main blocker to restore a process as non-root was to control the PID
of the restored process. This feature available via the clone3 system
call, or via /proc/sys/kernel/ns_last_pid is unfortunately guarded by
CAP_SYS_ADMIN.
In the past two years, requests for non-root checkpoint/restore have
increased due to the following use cases:
* Checkpoint/Restore in an HPC environment in combination with a
resource manager distributing jobs where users are always running as
non-root. There is a desire to provide a way to checkpoint and
restore long running jobs.
* Container migration as non-root
* We have been in contact with JVM developers who are integrating
CRIU into a Java VM to decrease the startup time. These
checkpoint/restore applications are not meant to be running with
CAP_SYS_ADMIN.
We have seen the following workarounds:
* Use a setuid wrapper around CRIU:
See https://github.com/FredHutch/slurm-examples/blob/master/checkpointer/lib/checkpointer/checkpointer-suid.c
* Use a setuid helper that writes to ns_last_pid.
Unfortunately, this helper delegation technique is impossible to use
with clone3, and is thus prone to races.
See https://github.com/twosigma/set_ns_last_pid
* Cycle through PIDs with fork() until the desired PID is reached:
This has been demonstrated to work with cycling rates of 100,000 PIDs/s
See https://github.com/twosigma/set_ns_last_pid
* Patch out the CAP_SYS_ADMIN check from the kernel
* Run the desired application in a new user and PID namespace to provide
a local CAP_SYS_ADMIN for controlling PIDs. This technique has limited
use in typical container environments (e.g., Kubernetes) as /proc is
typically protected with read-only layers (e.g., /proc/sys) for
hardening purposes. Read-only layers prevent additional /proc mounts
(due to proc's SB_I_USERNS_VISIBLE property), making the use of new
PID namespaces limited as certain applications need access to /proc
matching their PID namespace.
The introduced capability allows to:
* Control PIDs when the current user is CAP_CHECKPOINT_RESTORE capable
for the corresponding PID namespace via ns_last_pid/clone3.
* Open files in /proc/pid/map_files when the current user is
CAP_CHECKPOINT_RESTORE capable in the root namespace, useful for
recovering files that are unreachable via the file system such as
deleted files, or memfd files.
See corresponding selftest for an example with clone3().
Signed-off-by: Adrian Reber <areber@redhat.com>
Signed-off-by: Nicolas Viennot <Nicolas.Viennot@twosigma.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20200719100418.2112740-2-areber@redhat.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Here are number of small char/misc driver fixes for 5.8-rc6
Not that many complex fixes here, just a number of small fixes for
reported issues, and some new device ids. Nothing fancy.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXxBvPg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynJEQCfTmYNFFZ7WTx1FNsG/ScZLvgEC/QAnA19tK48
HBVDaLxodkGEa24u582V
=EcB/
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc into master
Pull char/misc fixes from Greg KH:
"Here are number of small char/misc driver fixes for 5.8-rc6
Not that many complex fixes here, just a number of small fixes for
reported issues, and some new device ids. Nothing fancy.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
virtio: virtio_console: add missing MODULE_DEVICE_TABLE() for rproc serial
intel_th: Fix a NULL dereference when hub driver is not loaded
intel_th: pci: Add Emmitsburg PCH support
intel_th: pci: Add Tiger Lake PCH-H support
intel_th: pci: Add Jasper Lake CPU support
virt: vbox: Fix guest capabilities mask check
virt: vbox: Fix VBGL_IOCTL_VMMDEV_REQUEST_BIG and _LOG req numbers to match upstream
uio_pdrv_genirq: fix use without device tree and no interrupt
uio_pdrv_genirq: Remove warning when irq is not specified
coresight: etmv4: Fix CPU power management setup in probe() function
coresight: cti: Fix error handling in probe
Revert "zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO()"
mei: bus: don't clean driver pointer
misc: atmel-ssc: lock with mutex instead of spinlock
phy: sun4i-usb: fix dereference of pointer phy0 before it is null checked
phy: rockchip: Fix return value of inno_dsidphy_probe()
phy: ti: j721e-wiz: Constify structs
phy: ti: am654-serdes: Constify regmap_config
phy: intel: fix enum type mismatch warning
phy: intel: Fix compilation error on FIELD_PREP usage
...
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull input fixes from Dmitry Torokhov:
"A few quirks for the Elan touchpad driver, another Thinkpad is being
switched over from PS/2 to native RMI4 interface, and we gave a brand
new SW_MACHINE_COVER switch definition"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c - add more hardware ID for Lenovo laptops
Input: i8042 - add Lenovo XiaoXin Air 12 to i8042 nomux list
Revert "Input: elants_i2c - report resolution information for touch major"
Input: elan_i2c - only increment wakeup count on touch
Input: synaptics - enable InterTouch for ThinkPad X1E 1st gen
ARM: dts: n900: remove mmc1 card detect gpio
Input: add `SW_MACHINE_COVER`
The second line of the description for event_type is before the first.
Move it to after the first line.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Pull networking fixes from David Miller:
1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking
BPF programs, from Maciej Żenczykowski.
2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu
Mariappan.
3) Slay memory leak in nl80211 bss color attribute parsing code, from
Luca Coelho.
4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin.
5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric
Dumazet.
6) xsk code dips too deeply into DMA mapping implementation internals.
Add dma_need_sync and use it. From Christoph Hellwig
7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko.
8) Check for disallowed attributes when loading flow dissector BPF
programs. From Lorenz Bauer.
9) Correct packet injection to L3 tunnel devices via AF_PACKET, from
Jason A. Donenfeld.
10) Don't advertise checksum offload on ipa devices that don't support
it. From Alex Elder.
11) Resolve several issues in TCP MD5 signature support. Missing memory
barriers, bogus options emitted when using syncookies, and failure
to allow md5 key changes in established states. All from Eric
Dumazet.
12) Fix interface leak in hsr code, from Taehee Yoo.
13) VF reset fixes in hns3 driver, from Huazhong Tan.
14) Make loopback work again with ipv6 anycast, from David Ahern.
15) Fix TX starvation under high load in fec driver, from Tobias
Waldekranz.
16) MLD2 payload lengths not checked properly in bridge multicast code,
from Linus Lüssing.
17) Packet scheduler code that wants to find the inner protocol
currently only works for one level of VLAN encapsulation. Allow
Q-in-Q situations to work properly here, from Toke
Høiland-Jørgensen.
18) Fix route leak in l2tp, from Xin Long.
19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport
support and various protocols. From Martin KaFai Lau.
20) Fix socket cgroup v2 reference counting in some situations, from
Cong Wang.
21) Cure memory leak in mlx5 connection tracking offload support, from
Eli Britstein.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
mlxsw: pci: Fix use-after-free in case of failed devlink reload
mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON()
net: macb: fix call to pm_runtime in the suspend/resume functions
net: macb: fix macb_suspend() by removing call to netif_carrier_off()
net: macb: fix macb_get/set_wol() when moving to phylink
net: macb: mark device wake capable when "magic-packet" property present
net: macb: fix wakeup test in runtime suspend/resume routines
bnxt_en: fix NULL dereference in case SR-IOV configuration fails
libbpf: Fix libbpf hashmap on (I)LP32 architectures
net/mlx5e: CT: Fix memory leak in cleanup
net/mlx5e: Fix port buffers cell size value
net/mlx5e: Fix 50G per lane indication
net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash
net/mlx5e: Fix VXLAN configuration restore after function reload
net/mlx5e: Fix usage of rcu-protected pointer
net/mxl5e: Verify that rpriv is not NULL
net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode
net/mlx5: Fix eeprom support for SFP module
cgroup: Fix sock_cgroup_data on big-endian.
selftests: bpf: Fix detach from sockmap tests
...
When SECCOMP_IOCTL_NOTIF_ID_VALID was first introduced it had the wrong
direction flag set. While this isn't a big deal as nothing currently
enforces these bits in the kernel, it should be defined correctly. Fix
the define and provide support for the old command until it is no longer
needed for backward compatibility.
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Signed-off-by: Kees Cook <keescook@chromium.org>
-----BEGIN PGP SIGNATURE-----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=31iz
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.8-2020-07-10' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Fix memleak for error path in registered files (Yang)
- Export CQ overflow state in flags, necessary to fix a case where
liburing doesn't know if it needs to enter the kernel (Xiaoguang)
- Fix for a regression in when user memory is accounted freed, causing
issues with back-to-back ring exit + init if the ulimit -l setting is
very tight.
* tag 'io_uring-5.8-2020-07-10' of git://git.kernel.dk/linux-block:
io_uring: account user memory freed when exit has been queued
io_uring: fix memleak in io_sqe_files_register()
io_uring: fix memleak in __io_sqe_files_update()
io_uring: export cq overflow status to userspace
include/uapi/linux/raw.h leaks CONFIG_MAX_RAW_DEVS to userspace.
Userspace programs cannot use MAX_RAW_MINORS since CONFIG_MAX_RAW_DEVS
is not available anyway.
Remove the MAX_RAW_MINORS definition from the exported header, and use
CONFIG_MAX_RAW_DEVS in drivers/char/raw.c
While I was here, I converted printk(KERN_WARNING ...) to pr_warn(...)
and stretched the warning message.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200617083313.183184-1-masahiroy@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Upstream VirtualBox has defined and is using a few new request types for
vmmdev requests passed through /dev/vboxguest to the hypervisor.
Add the defines for these to vbox_vmmdev_types.h and add add them to the
whitelists of vmmdev requests which userspace is allowed to make.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1789545
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200709120858.63928-7-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for the new VBG_IOCTL_ACQUIRE_GUEST_CAPABILITIES ioctl, this
is necessary for automatic resizing of the guest resolution to match the
VM-window size to work with the new VMSVGA virtual GPU which is now the
new default in VirtualBox.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1789545
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200709120858.63928-6-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Until this commit the mainline kernel version (this version) of the
vboxguest module contained a bug where it defined
VBGL_IOCTL_VMMDEV_REQUEST_BIG and VBGL_IOCTL_LOG using
_IOC(_IOC_READ | _IOC_WRITE, 'V', ...) instead of
_IO(V, ...) as the out of tree VirtualBox upstream version does.
Since the VirtualBox userspace bits are always built against VirtualBox
upstream's headers, this means that so far the mainline kernel version
of the vboxguest module has been failing these 2 ioctls with -ENOTTY.
I guess that VBGL_IOCTL_VMMDEV_REQUEST_BIG is never used causing us to
not hit that one and sofar the vboxguest driver has failed to actually
log any log messages passed it through VBGL_IOCTL_LOG.
This commit changes the VBGL_IOCTL_VMMDEV_REQUEST_BIG and VBGL_IOCTL_LOG
defines to match the out of tree VirtualBox upstream vboxguest version,
while keeping compatibility with the old wrong request defines so as
to not break the kernel ABI in case someone has been using the old
request defines.
Fixes: f6ddd094f5 ("virt: Add vboxguest driver for Virtual Box Guest integration UAPI")
Cc: stable@vger.kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200709120858.63928-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For those applications which are not willing to use io_uring_enter()
to reap and handle cqes, they may completely rely on liburing's
io_uring_peek_cqe(), but if cq ring has overflowed, currently because
io_uring_peek_cqe() is not aware of this overflow, it won't enter
kernel to flush cqes, below test program can reveal this bug:
static void test_cq_overflow(struct io_uring *ring)
{
struct io_uring_cqe *cqe;
struct io_uring_sqe *sqe;
int issued = 0;
int ret = 0;
do {
sqe = io_uring_get_sqe(ring);
if (!sqe) {
fprintf(stderr, "get sqe failed\n");
break;;
}
ret = io_uring_submit(ring);
if (ret <= 0) {
if (ret != -EBUSY)
fprintf(stderr, "sqe submit failed: %d\n", ret);
break;
}
issued++;
} while (ret > 0);
assert(ret == -EBUSY);
printf("issued requests: %d\n", issued);
while (issued) {
ret = io_uring_peek_cqe(ring, &cqe);
if (ret) {
if (ret != -EAGAIN) {
fprintf(stderr, "peek completion failed: %s\n",
strerror(ret));
break;
}
printf("left requets: %d\n", issued);
continue;
}
io_uring_cqe_seen(ring, cqe);
issued--;
printf("left requets: %d\n", issued);
}
}
int main(int argc, char *argv[])
{
int ret;
struct io_uring ring;
ret = io_uring_queue_init(16, &ring, 0);
if (ret) {
fprintf(stderr, "ring setup failed: %d\n", ret);
return 1;
}
test_cq_overflow(&ring);
return 0;
}
To fix this issue, export cq overflow status to userspace by adding new
IORING_SQ_CQ_OVERFLOW flag, then helper functions() in liburing, such as
io_uring_peek_cqe, can be aware of this cq overflow and do flush accordingly.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the zoned storage model, the sectors within a zone are typically all
writeable. With the introduction of the Zoned Namespace (ZNS) Command
Set in the NVM Express organization, the model was extended to have a
specific writeable capacity.
Extend the zone descriptor data structure with a zone capacity field to
indicate to the user how many sectors in a zone are writeable.
Introduce backward compatibility in the zone report ioctl by extending
the zone report header data structure with a flags field to indicate if
the capacity field is available.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
AFU (Accelerated Function Unit) is dynamic region of the DFL based FPGA,
and always defined by users. Some DFL based FPGA cards allow users to
implement their own interrupts in AFU. In order to support this,
hardware implements a new UINT (AFU Interrupt) private feature with
related capability register which describes the number of supported
AFU interrupts as well as the local index of the interrupts for
software enumeration, and from software side, driver follows the common
DFL interrupt notification and handling mechanism, and it implements
two ioctls below for user to query number of irqs supported and set/unset
interrupt triggers.
Ioctls:
* DFL_FPGA_PORT_UINT_GET_IRQ_NUM
get the number of irqs, which is used to determine how many interrupts
UINT feature supports.
* DFL_FPGA_PORT_UINT_SET_IRQ
set/unset eventfds as AFU interrupt triggers.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Error reporting interrupt is very useful to notify users that some
errors are detected by the hardware. Once users are notified, they
could query hardware logged error states, no need to continuously
poll on these states.
This patch adds interrupt support for fme global error reporting sub
feature. It follows the common DFL interrupt notification and handling
mechanism. And it implements two ioctls below for user to query
number of irqs supported, and set/unset interrupt triggers.
Ioctls:
* DFL_FPGA_FME_ERR_GET_IRQ_NUM
get the number of irqs, which is used to determine whether/how many
interrupts fme error reporting feature supports.
* DFL_FPGA_FME_ERR_SET_IRQ
set/unset given eventfds as fme error reporting interrupt triggers.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Error reporting interrupt is very useful to notify users that some
errors are detected by the hardware. Once users are notified, they
could query hardware logged error states, no need to continuously
poll on these states.
This patch adds interrupt support for port error reporting sub feature.
It follows the common DFL interrupt notification and handling mechanism,
implements two ioctl commands below for user to query number of irqs
supported, and set/unset interrupt triggers.
Ioctls:
* DFL_FPGA_PORT_ERR_GET_IRQ_NUM
get the number of irqs, which is used to determine whether/how many
interrupts error reporting feature supports.
* DFL_FPGA_PORT_ERR_SET_IRQ
set/unset given eventfds as error interrupt triggers.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2020-06-30
The following pull-request contains BPF updates for your *net* tree.
We've added 28 non-merge commits during the last 9 day(s) which contain
a total of 35 files changed, 486 insertions(+), 232 deletions(-).
The main changes are:
1) Fix an incorrect verifier branch elimination for PTR_TO_BTF_ID pointer
types, from Yonghong Song.
2) Fix UAPI for sockmap and flow_dissector progs that were ignoring various
arguments passed to BPF_PROG_{ATTACH,DETACH}, from Lorenz Bauer & Jakub Sitnicki.
3) Fix broken AF_XDP DMA hacks that are poking into dma-direct and swiotlb
internals and integrate it properly into DMA core, from Christoph Hellwig.
4) Fix RCU splat from recent changes to avoid skipping ingress policy when
kTLS is enabled, from John Fastabend.
5) Fix BPF ringbuf map to enforce size to be the power of 2 in order for its
position masking to work, from Andrii Nakryiko.
6) Fix regression from CAP_BPF work to re-allow CAP_SYS_ADMIN for loading
of network programs, from Maciej Żenczykowski.
7) Fix libbpf section name prefix for devmap progs, from Jesper Dangaard Brouer.
8) Fix formatting in UAPI documentation for BPF helpers, from Quentin Monnet.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This event code represents the state of a removable cover of a device.
Value 0 means that the cover is open or removed, value 1 means that the
cover is closed.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Link: https://lore.kernel.org/r/20200612125402.18393-2-merlijn@wizzup.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
