Kernel Source and devicetree for NOTHING Phone(3a) and Phone(3a)Pro
Find a file
Gratian Crisan 84ff2e988b usb: dwc3: pci: skip BYT GPIO lookup table for hardwired phy
commit b32b8f2b9542d8039f5468303a6ca78c1b5611a5 upstream.

Hardware based on the Bay Trail / BYT SoCs require an external ULPI phy for
USB device-mode. The phy chip usually has its 'reset' and 'chip select'
lines connected to GPIOs described by ACPI fwnodes in the DSDT table.

Because of hardware with missing ACPI resources for the 'reset' and 'chip
select' GPIOs commit 5741022cbd ("usb: dwc3: pci: Add GPIO lookup table
on platforms without ACPI GPIO resources") introduced a fallback
gpiod_lookup_table with hard-coded mappings for Bay Trail devices.

However there are existing Bay Trail based devices, like the National
Instruments cRIO-903x series, where the phy chip has its 'reset' and
'chip-select' lines always asserted in hardware via resistor pull-ups. On
this hardware the phy chip is always enabled and the ACPI dsdt table is
missing information not only for the 'chip-select' and 'reset' lines but
also for the BYT GPIO controller itself "INT33FC".

With the introduction of the gpiod_lookup_table initializing the USB
device-mode on these hardware now errors out. The error comes from the
gpiod_get_optional() calls in dwc3_pci_quirks() which will now return an
-ENOENT error due to the missing ACPI entry for the INT33FC gpio controller
used in the aforementioned table.

This hardware used to work before because gpiod_get_optional() will return
NULL instead of -ENOENT if no GPIO has been assigned to the requested
function. The dwc3_pci_quirks() code for setting the 'cs' and 'reset' GPIOs
was then skipped (due to the NULL return). This is the correct behavior in
cases where the phy chip is hardwired and there are no GPIOs to control.

Since the gpiod_lookup_table relies on the presence of INT33FC fwnode
in ACPI tables only add the table if we know the entry for the INT33FC
gpio controller is present. This allows Bay Trail based devices with
hardwired dwc3 ULPI phys to continue working.

Fixes: 5741022cbd ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources")
Cc: stable <stable@kernel.org>
Signed-off-by: Gratian Crisan <gratian.crisan@ni.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230726184555.218091-2-gratian.crisan@ni.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03 10:24:10 +02:00
arch KVM: x86: Disallow KVM_SET_SREGS{2} if incoming CR0 is invalid 2023-08-03 10:24:08 +02:00
block blk-mq: Fix stall due to recursive flush plug 2023-08-03 10:23:48 +02:00
certs certs: Fix build error when PKCS#11 URI contains semicolon 2023-02-09 11:28:11 +01:00
crypto crypto: jitter - correct health test during initialization 2023-07-19 16:21:42 +02:00
Documentation tracing/probes: Add symstr type for dynamic events 2023-08-03 10:23:54 +02:00
drivers usb: dwc3: pci: skip BYT GPIO lookup table for hardwired phy 2023-08-03 10:24:10 +02:00
fs smb3: do not set NTLMSSP_VERSION flag for negotiate not auth request 2023-08-03 10:24:04 +02:00
include block: Fix a source code comment in include/uapi/linux/blkzoned.h 2023-08-03 10:24:04 +02:00
init gcc: disable '-Warray-bounds' for gcc-13 too 2023-04-26 14:28:43 +02:00
io_uring io_uring: don't audit the capability check in io_uring_create() 2023-08-03 10:23:48 +02:00
ipc ipc: fix memory leak in init_mqueue_fs() 2022-12-31 13:32:01 +01:00
kernel tracing: Fix warning in trace_buffered_event_disable() 2023-08-03 10:24:07 +02:00
lib maple_tree: fix 32 bit mas_next testing 2023-08-03 10:23:55 +02:00
LICENSES LICENSES/LGPL-2.1: Add LGPL-2.1-or-later as valid identifiers 2021-12-16 14:33:10 +01:00
mm kasan: add kasan_tag_mismatch prototype 2023-07-23 13:49:32 +02:00
net tipc: stop tipc crypto on failure in tipc_node_create 2023-08-03 10:24:02 +02:00
rust rust: kernel: Mark rust_fmt_argument as extern "C" 2023-04-26 14:28:38 +02:00
samples samples: ftrace: Save required argument registers in sample trampolines 2023-07-23 13:49:44 +02:00
scripts scripts/kallsyms: update the usage in the comment block 2023-07-27 08:50:50 +02:00
security security: keys: Modify mismatched function name 2023-07-27 08:50:43 +02:00
sound ASoC: fsl_spdif: Silence output on stop 2023-08-03 10:24:04 +02:00
tools maple_tree: add __init and __exit to test module 2023-08-03 10:23:55 +02:00
usr usr/gen_init_cpio.c: remove unnecessary -1 values from int file 2022-10-03 14:21:44 -07:00
virt KVM: Grab a reference to KVM for VM and vCPU stats file descriptors 2023-08-03 10:24:08 +02:00
.clang-format inet: ping: use hlist_nulls rcu iterator during lookup 2022-12-01 12:42:46 +01:00
.cocciconfig
.get_maintainer.ignore get_maintainer: add Alan to .get_maintainer.ignore 2022-08-20 15:17:44 -07:00
.gitattributes
.gitignore Kbuild: add Rust support 2022-09-28 09:02:20 +02:00
.mailmap 9 hotfixes. 6 for MM, 3 for other areas. Four of these patches address 2022-12-10 17:10:52 -08:00
.rustfmt.toml rust: add .rustfmt.toml 2022-09-28 09:02:20 +02:00
COPYING COPYING: state that all contributions really are covered by this file 2020-02-10 13:32:20 -08:00
CREDITS MAINTAINERS: Remove Michal Marek from Kbuild maintainers 2022-11-16 14:53:00 +09:00
Kbuild Kbuild updates for v6.1 2022-10-10 12:00:45 -07:00
Kconfig kbuild: ensure full rebuild when the compiler is updated 2020-05-12 13:28:33 +09:00
MAINTAINERS smb: move client and server files to common directory fs/smb 2023-06-28 11:12:40 +02:00
Makefile Linux 6.1.42 2023-07-27 08:50:53 +02:00
README

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.