Kernel Source and devicetree for NOTHING Phone(3a) and Phone(3a)Pro
Find a file
Hans de Goede 862aa98181 Input: goodix - ensure int GPIO is in input for gpio_count == 1 && gpio_int_idx == 0 case
commit 423622a90abb243944d1517b9f57db53729e45c4 upstream.

Add a special case for gpio_count == 1 && gpio_int_idx == 0 to
goodix_add_acpi_gpio_mappings().

It seems that on newer x86/ACPI devices the reset and irq GPIOs are no
longer listed as GPIO resources instead there is only 1 GpioInt resource
and _PS0 does the whole reset sequence for us.

This means that we must call acpi_device_fix_up_power() on these devices
to ensure that the chip is reset before we try to use it.

This part was already fixed in commit 3de93e6ed2 ("Input: goodix - call
acpi_device_fix_up_power() in some cases") by adding a call to
acpi_device_fix_up_power() to the generic "Unexpected ACPI resources"
catch all.

But it turns out that this case on some hw needs some more special
handling. Specifically the firmware may bootup with the IRQ pin in
output mode. The reset sequence from ACPI _PS0 (executed by
acpi_device_fix_up_power()) should put the pin in input mode,
but the GPIO subsystem has cached the direction at bootup, causing
request_irq() to fail due to gpiochip_lock_as_irq() failure:

[    9.119864] Goodix-TS i2c-GDIX1002:00: Unexpected ACPI resources: gpio_count 1, gpio_int_idx 0
[    9.317443] Goodix-TS i2c-GDIX1002:00: ID 911, version: 1060
[    9.321902] input: Goodix Capacitive TouchScreen as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX1002:00/input/input8
[    9.327840] gpio gpiochip0: (INT3453:00): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ
[    9.327856] gpio gpiochip0: (INT3453:00): unable to lock HW IRQ 26 for IRQ
[    9.327861] genirq: Failed to request resources for GDIX1002:00 (irq 131) on irqchip intel-gpio
[    9.327912] Goodix-TS i2c-GDIX1002:00: request IRQ failed: -5

Fix this by adding a special case for gpio_count == 1 && gpio_int_idx == 0
which adds an ACPI GPIO lookup table for the int GPIO even though we cannot
use it for reset purposes (as there is no reset GPIO).

Adding the lookup will make the gpiod_int = gpiod_get(..., GPIOD_IN) call
succeed, which will explicitly set the direction to input fixing the issue.

Note this re-uses the acpi_goodix_int_first_gpios[] lookup table, since
there is only 1 GPIO in the ACPI resources the reset entry in that
lookup table will amount to a no-op.

Reported-and-tested-by: Michael Smith <1973.mjsmith@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231003215144.69527-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-19 23:08:57 +02:00
arch powerpc/47x: Fix 47x syscall return crash 2023-10-19 23:08:56 +02:00
block block: fix use-after-free of q->q_usage_counter 2023-10-10 22:00:37 +02:00
certs certs: Fix build error when PKCS#11 URI contains semicolon 2023-02-09 11:28:11 +01:00
crypto crypto: lrw,xts - Replace strlcpy with strscpy 2023-09-23 11:11:01 +02:00
Documentation tcp: enforce receive buffer memory limits by allowing the tcp window to shrink 2023-10-19 23:08:54 +02:00
drivers Input: goodix - ensure int GPIO is in input for gpio_count == 1 && gpio_int_idx == 0 case 2023-10-19 23:08:57 +02:00
fs ceph: fix type promotion bug on 32bit systems 2023-10-19 23:08:57 +02:00
include mcb: remove is_added flag from mcb_device struct 2023-10-19 23:08:56 +02:00
init sched/psi: Select KERNFS as needed 2023-09-13 09:42:28 +02:00
io_uring io_uring/fs: remove sqe->rw_flags checking from LINKAT 2023-10-06 14:57:02 +02:00
ipc ipc: fix memory leak in init_mqueue_fs() 2022-12-31 13:32:01 +01:00
kernel workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask() 2023-10-19 23:08:54 +02:00
lib lib/test_meminit: fix off-by-one error in test_pages() 2023-10-15 18:32:41 +02:00
LICENSES LICENSES/LGPL-2.1: Add LGPL-2.1-or-later as valid identifiers 2021-12-16 14:33:10 +01:00
mm mm: page_alloc: fix CMA and HIGHATOMIC landing on the wrong buddy list 2023-10-10 22:00:36 +02:00
net libceph: use kernel_connect() 2023-10-19 23:08:56 +02:00
rust rust: allocator: Prevent mis-aligned allocation 2023-08-11 12:08:18 +02:00
samples samples/hw_breakpoint: fix building without module unloading 2023-09-23 11:11:09 +02:00
scripts modpost: add missing else to the "of" check 2023-10-10 22:00:41 +02:00
security KEYS: trusted: Remove redundant static calls usage 2023-10-19 23:08:50 +02:00
sound ALSA: hda/realtek - ALC287 merge RTK codec with CS CS35L41 AMP 2023-10-19 23:08:51 +02:00
tools netfilter: nf_tables: Deduplicate nft_register_obj audit logs 2023-10-10 22:00:43 +02:00
usr usr/gen_init_cpio.c: remove unnecessary -1 values from int file 2022-10-03 14:21:44 -07:00
virt kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add() 2023-09-13 09:42:46 +02:00
.clang-format inet: ping: use hlist_nulls rcu iterator during lookup 2022-12-01 12:42:46 +01:00
.cocciconfig
.get_maintainer.ignore get_maintainer: add Alan to .get_maintainer.ignore 2022-08-20 15:17:44 -07:00
.gitattributes .gitattributes: use 'dts' diff driver for dts files 2019-12-04 19:44:11 -08:00
.gitignore Kbuild: add Rust support 2022-09-28 09:02:20 +02:00
.mailmap 9 hotfixes. 6 for MM, 3 for other areas. Four of these patches address 2022-12-10 17:10:52 -08:00
.rustfmt.toml rust: add .rustfmt.toml 2022-09-28 09:02:20 +02:00
COPYING COPYING: state that all contributions really are covered by this file 2020-02-10 13:32:20 -08:00
CREDITS MAINTAINERS: Remove Michal Marek from Kbuild maintainers 2022-11-16 14:53:00 +09:00
Kbuild Kbuild updates for v6.1 2022-10-10 12:00:45 -07:00
Kconfig kbuild: ensure full rebuild when the compiler is updated 2020-05-12 13:28:33 +09:00
MAINTAINERS devlink: move code to a dedicated directory 2023-08-30 16:11:00 +02:00
Makefile Linux 6.1.58 2023-10-15 18:32:41 +02:00
README

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.