Kernel Source and devicetree for NOTHING Phone(3a) and Phone(3a)Pro
aa87e31757
- Add support to reset device after the user closes the file descriptor.
Because we support a single user, we can reset the device (if needs to)
after a user closes its file descriptor to make sure the device is in
idle and clean state for the next user.
- Add a new feature to allow the user to wait on interrupt. This is needed
for future ASICs
- Replace GFP_ATOMIC with GFP_KERNEL wherever possible and add code to
support failure of allocating with GFP_ATOMIC.
- Update code to support the latest firmware image:
- More security features are done in the firmware
- Remove hard-coded assumptions and replace them with values that are
sent to the firmware on loading.
- Print device unusable error
- Reset device in case the communication between driver and firmware
gets out of sync.
- Support new PCI device ids for secured GAUDI.
- Expose current power draw through the INFO IOCTL.
- Support resetting the device upon a request from the BMC (through F/W).
- Always use only a single MSI in GAUDI, due to H/W limitation.
- Improve data-path code by taking out code from spinlock protection.
- Allow user to specify custom timeout per Command Submission.
- Some enhancements to debugfs.
- Various minor changes and improvements.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEE7TEboABC71LctBLFZR1NuKta54AFAmByAxcTHG9nYWJiYXlA
a2VybmVsLm9yZwAKCRBlHU24q1rngLzgB/4gkltBLgkp+VaIK+fb7uB34CY096M1
e8iO7eqxjrjW3YymBaHVYVuaogv9/XD1pUap/rsvw4Ytvb3g390wLjHhsHcSW0AM
8gIswu0VqWWrxphe0ns+ArV4j6JWVBkUQ1QDxp9Ut0qMaUZha/EkfAengMseQbjR
3oaPwrUCpPpl4XfZaBTxTg3RyHtXnzi3cFw2b207D9iX8DS69TtLgMPAj5xN4vO2
lei/4ZRJw/MbJSwvmNJt2d7E7CniLQh9sy7JnMeinpG+WD4GMdx1m0bI8fIuKQ11
GkvVRREGHuQ0YtvTIWi9K+GAwJNqIIw/cW8M3+P1+7WjLWAKkyOTtYk5
=ZHBU
-----END PGP SIGNATURE-----
Merge tag 'misc-habanalabs-next-2021-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next
Oded writes:
This tag contains habanalabs driver changes for v5.13:
- Add support to reset device after the user closes the file descriptor.
Because we support a single user, we can reset the device (if needs to)
after a user closes its file descriptor to make sure the device is in
idle and clean state for the next user.
- Add a new feature to allow the user to wait on interrupt. This is needed
for future ASICs
- Replace GFP_ATOMIC with GFP_KERNEL wherever possible and add code to
support failure of allocating with GFP_ATOMIC.
- Update code to support the latest firmware image:
- More security features are done in the firmware
- Remove hard-coded assumptions and replace them with values that are
sent to the firmware on loading.
- Print device unusable error
- Reset device in case the communication between driver and firmware
gets out of sync.
- Support new PCI device ids for secured GAUDI.
- Expose current power draw through the INFO IOCTL.
- Support resetting the device upon a request from the BMC (through F/W).
- Always use only a single MSI in GAUDI, due to H/W limitation.
- Improve data-path code by taking out code from spinlock protection.
- Allow user to specify custom timeout per Command Submission.
- Some enhancements to debugfs.
- Various minor changes and improvements.
* tag 'misc-habanalabs-next-2021-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (41 commits)
habanalabs: print f/w boot unknown error
habanalabs: update to latest F/W communication header
habanalabs/gaudi: skip iATU if F/W security is enabled
habanalabs/gaudi: derive security status from pci id
habanalabs: move dram scrub to free sequence
habanalabs: send dynamic msi-x indexes to f/w
habanalabs/gaudi: clear QM errors only if not in stop_on_err mode
habanalabs: support DEVICE_UNUSABLE error indication from FW
habanalabs: use strscpy instead of sprintf and strlcpy
habanalabs: remove the store jobs array from CS IOCTL
habanalabs/gaudi: add debugfs to DMA from the device
habanalabs/gaudi: sync stream add protection to SOB reset flow
habanalabs: add custom timeout flag per cs
habanalabs: improve utilization calculation
habanalabs: support legacy and new pll indexes
habanalabs: move relevant datapath work outside cs lock
habanalabs: avoid soft lockup bug upon mapping error
habanalabs/gaudi: Update async events header
habanalabs/gaudi: unsecure TPC cfg status registers
habanalabs/gaudi: always use single-msi mode
...
|
||
|---|---|---|
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| fs | ||
| include | ||
| init | ||
| ipc | ||
| kernel | ||
| lib | ||
| LICENSES | ||
| mm | ||
| net | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | ||
| .cocciconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.