Christophe Ricard 2130fb97fe NFC: st21nfca: Adding support for secure element ... st21nfca has 1 physical SWP line and can support up to 2 secure elements (UICC & eSE) thanks to an external switch managed with a gpio. The platform integrator needs to specify thanks to 2 initialization properties, uicc-present and ese-present, if it is suppose to have uicc and/or ese. Of course if the platform does not have an external switch, only one kind of secure element can be supported. Those parameters are under platform integrator responsibilities. During initialization, the white_list will be set according to those parameters. The discovery_se function will assume a secure element is physically present according to uicc-present and ese-present values and will add it to the secure element list. On ese activation, the atr is retrieved to calculate a command exchange timeout based on the first atr(TB) value. The se_io will allow to transfer data over SWP. 2 kind of events may appear after a data is sent over: - ST21NFCA_EVT_TRANSMIT_DATA when receiving an apdu answer - ST21NFCA_EVT_WTX_REQUEST when the secure element needs more time than expected to compute a command. If this timeout expired, a first recovery tentative consist to send a simple software reset proprietary command. If this tentative still fail, a second recovery tentative consist to send a hardware reset proprietary command. This function is only relevant for eSE like secure element. This patch also change the way a pipe is referenced. There can be different pipe connected to the same gate with different host destination (ex: CONNECTIVITY). In order to keep host information every pipe are reference with a tuple (gate, host). In order to reduce changes, we are keeping unchanged the way a gate is addressed on the Terminal Host. However, this is working because we consider the apdu reader gate is only present on the eSE slot also the connectivity gate cannot give a reliable value; it will give the latest stored pipe value. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>		2015-01-28 00:03:36 +01:00
..
ad5449.h
ad5755.h
ad7266.h
ad7291.h	staging:iio:ad7291: Move out of staging	2014-07-08 21:17:30 +01:00
ad7298.h
ad7303.h
ad7791.h
ad7793.h
ad7887.h
adau17x1.h	ASoC: Add ADAU1381/ADAU1781 audio CODEC support	2014-05-27 20:54:51 +01:00
adau1977.h	ASoC: Add ADAU1977 CODEC driver	2014-02-19 13:36:15 +09:00
ads7828.h
arm-ux500-pm.h
asoc-imx-ssi.h
asoc-kirkwood.h
asoc-mx27vis.h
asoc-palm27x.h
asoc-s3c.h	ASoC: Samsung: Add quirk for internal DMA	2014-11-07 10:38:17 +00:00
asoc-s3c24xx_simtec.h	ASoC: s3c24xx: Remove invalid file reference	2014-02-25 21:29:31 +09:00
asoc-ti-mcbsp.h	ASoC: mcbsp: Trivial cleanup in asoc-ti-mcbsp.h	2013-12-30 11:50:16 +00:00
asoc-ux500-msp.h	ARM: ux500: Don't use enums for MSP IDs - for easy DT conversion	2014-01-07 15:36:09 +00:00
at24.h	misc: (at24) move header to linux/platform_data/	2013-09-30 06:02:34 +02:00
at91_adc.h	iio: adc: at91_adc: Add support for touchscreens without TSMR	2014-05-07 18:28:40 +02:00
ata-pxa.h
ata-samsung_cf.h	ata: pata_samsung_cf: removes s5pc100 related ata codes	2014-06-30 10:48:08 -04:00
atmel.h	TTY/Serial driver patches for 3.16-rc1	2014-06-03 09:01:02 -07:00
bcmgenet.h	net: bcmgenet: enable driver to work without a device tree	2014-12-08 20:26:59 -05:00
bd6107.h	backlight: Add ROHM BD6107 backlight driver	2013-07-16 13:01:19 +09:00
brcmfmac-sdio.h	brcmfmac: abstract tx packet processing functions	2013-08-15 16:07:55 -04:00
bt-nokia-h4p.h	staging/bluetooth: Add hci_h4p driver	2014-02-07 10:13:53 -08:00
camera-mx2.h
camera-mx3.h	[media] V4L2: mx3_camera: add support for asynchronous subdevice registration	2013-08-18 09:06:37 -03:00
camera-pxa.h
camera-rcar.h	[media] V4L2: soc_camera: Renesas R-Car VIN driver	2013-08-18 09:01:10 -03:00
clk-integrator.h	ARM: integrator: switch to fetch clocks from device tree	2014-02-13 11:20:42 +01:00
clk-lpss.h
clk-realview.h
clk-u300.h
clk-ux500.h	clk: ux500: Copy u8500_clk_init() ready for DT enablement	2013-09-26 11:05:26 +02:00
coda.h
crypto-atmel.h
crypto-ux500.h
cyttsp4.h
davinci_asp.h	ASoC: davinci-mcasp: Rename platform data struct	2014-02-03 18:26:59 +00:00
db8500_thermal.h
dma-atmel.h
dma-coh901318.h
dma-dw.h	dmaengine: dw: split dma-dw.h to platform and private parts	2014-10-15 20:31:04 +05:30
dma-ep93xx.h
dma-imx-sdma.h	dma: imx-sdma: Add sdma firmware version 2 support	2013-12-16 09:18:47 +05:30
dma-imx.h	dmaengine: imx-sdma: Add a new DMATYPE for SAI	2014-11-17 13:50:43 +05:30
dma-mmp_tdma.h	dma: Cleanup dma-mmp_tdma.h header	2014-01-13 13:30:30 +05:30
dma-mv_xor.h	dma: mv_xor: Cleanup in dma-mv_xor.h header	2014-01-13 13:30:31 +05:30
dma-rcar-audmapp.h	shdma: add R-Car Audio DMAC peri peri driver	2014-03-29 19:38:09 +05:30
dma-rcar-hpbdma.h	dma: add driver for R-Car HPB-DMAC	2013-09-02 17:35:55 +05:30
dma-s3c24xx.h	ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442	2013-10-21 05:32:48 +09:00
dma-ste-dma40.h
dmtimer-omap.h
drv260x-pdata.h	Input: drv260x - add TI drv260x haptics driver	2014-08-19 22:19:28 -07:00
dwc3-omap.h
edma.h	ARM: edma: Add edma_assign_channel_eventq() to move channel to a give queue	2014-07-28 17:03:13 +05:30
efm32-spi.h	spi: new controller driver for efm32 SoCs	2013-08-09 17:32:57 +01:00
efm32-uart.h
ehci-sh.h
elm.h	nand: omap2: Remove horrible ifdefs to fix module probe	2014-09-22 11:37:51 -07:00
emif_plat.h
eth-netx.h	net: Cleanup in eth-netx.h	2014-01-02 03:30:35 -05:00
fsa9480.h
g762.h
gpio-davinci.h	gpio: remove obsolete tnetv107x driver	2014-03-05 10:44:44 +08:00
gpio-dwapb.h	GPIO: gpio-dwapb: Enable platform driver binding to MFD driver	2014-09-23 17:51:37 +02:00
gpio-em.h	gpio: em: Add pinctrl support	2013-07-21 17:24:41 +02:00
gpio-lpc32xx.h	ARM: lpc32xx: move custom GPIO header	2013-12-03 11:26:06 +01:00
gpio-omap.h
gpio-rcar.h
gpio-ts5500.h
gpio_backlight.h
hsmmc-omap.h	mmc: omap_hsmmc: remove unused slot_id parameter	2014-11-26 14:30:56 +01:00
hwmon-s3c.h	hwmon: (s3c) Trivial cleanup in hwmon-s3c.h	2014-01-14 21:36:52 -08:00
i2c-cbus-gpio.h
i2c-davinci.h
i2c-designware.h	i2c: designware: add support of platform data to set I2C mode	2014-09-29 22:41:17 +02:00
i2c-imx.h
i2c-nuc900.h
i2c-s3c2410.h	i2c: s3c2410: Trivial cleanup in header file	2014-03-10 17:32:28 +01:00
ina2xx.h
intel-mid_wdt.h	watchdog: add Intel MID watchdog driver support	2014-06-10 21:48:16 +02:00
invensense_mpu6050.h
iommu-omap.h	iommu/omap: Remove platform data da_start and da_end fields	2014-07-29 12:39:56 +02:00
ipmmu-vmsa.h	iommu: Add driver for Renesas VMSA-compatible IPMMU	2014-05-26 11:18:21 +02:00
irda-pxaficp.h
irda-sa11x0.h	arm: sa1100: move irda header to linux/platform_data	2014-12-30 18:44:07 -05:00
irq-renesas-intc-irqpin.h
irq-renesas-irqc.h
isl9305.h	regulator: isl9305: Add Intersil ISL9305/H driver	2014-09-06 12:43:05 +01:00
keyboard-pxa930_rotary.h
keyboard-spear.h
keypad-ep93xx.h	Input: keypad-ep93xx - cleanup header file	2013-12-27 17:20:21 -08:00
keypad-nomadik-ske.h
keypad-omap.h	Input: keypad-omap - cleanup header file	2013-12-27 17:20:22 -08:00
keypad-pxa27x.h
keypad-w90p910.h
keyscan-davinci.h
lcd-mipid.h
leds-kirkwood-netxbig.h	leds: kirkwood: Cleanup in header files	2014-01-27 17:28:51 -08:00
leds-kirkwood-ns2.h	leds: kirkwood: Cleanup in header files	2014-01-27 17:28:51 -08:00
leds-lm355x.h
leds-lm3642.h
leds-lp55xx.h	leds: lp55xx: handle enable pin in driver	2013-10-25 10:13:25 -07:00
leds-omap.h
leds-pca963x.h	leds-pca9633: Rename to leds-pca963x	2013-08-26 17:22:14 -07:00
leds-s3c24xx.h	leds: leds-s3c24xx: Trivial cleanup in header file	2014-02-27 09:57:11 -08:00
lm3630a_bl.h	backlight: lm3630: apply chip revision	2013-11-13 12:09:15 +09:00
lm3639_bl.h
lp855x.h	backlight: lp855x: Add supply regulator to lp855x	2014-12-09 09:24:45 +00:00
lp8727.h
lp8755.h
lv5207lp.h	backlight: Add Sanyo LV5207LP backlight driver	2013-07-16 13:01:10 +09:00
macb.h
mailbox-omap.h
max197.h	hwmon: (max197) add include guard	2014-01-14 21:36:53 -08:00
max3421-hcd.h	usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity	2014-05-29 11:19:30 -07:00
max6697.h
mfd-mcp-sa11x0.h	mfd: Cleanup mfd-mcp-sa11x0.h header	2014-01-21 08:28:59 +00:00
microread.h
mmc-atmel-mci.h	mmc: atmel-mci: move mach header to platform_data	2014-11-10 12:40:37 +01:00
mmc-davinci.h
mmc-esdhc-imx.h	mmc: sdhci-esdhc-imx: add delay line setting support	2013-10-21 15:58:13 -04:00
mmc-msm_sdcc.h	mmc: msm: Cleanup mmc-msm_sdcc.h header	2014-02-25 15:43:15 -05:00
mmc-mvsdio.h	mmc: mvsdio: Cleanup mmc-mvsdio.h header	2014-02-25 15:43:23 -05:00
mmc-mxcmmc.h
mmc-omap.h	ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver	2014-11-26 14:30:53 +01:00
mmc-pxamci.h	ARM: pxa: propagate errors from regulator_enable() to pxamci	2013-07-23 12:15:15 -07:00
mmc-s3cmci.h
mmc-sdhci-s3c.h
mmp_audio.h
mmp_dma.h
mouse-pxa930_trkball.h
msm_serial_hs.h
mtd-davinci-aemif.h	ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif	2014-02-23 20:33:18 +05:30
mtd-davinci.h
mtd-mxc_nand.h
mtd-nand-omap2.h	nand: omap2: Add support for flash-based bad block table	2014-09-17 01:02:48 -07:00
mtd-nand-pxa3xx.h	mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding	2014-05-21 12:55:09 -07:00
mtd-nand-s3c2410.h	mtd: nand: s3c2410: Trivial cleanup in header file	2014-03-10 22:42:26 -07:00
mtd-onenand-omap2.h	mtd: omap2: Cleanup header files	2014-01-11 11:39:18 -08:00
mtd-orion_nand.h	mtd: orion: Cleanup mtd-orion_nand.h header	2014-01-11 11:39:23 -08:00
mv_usb.h
net-cw1200.h
ntc_thermistor.h	hwmon: (ntc_thermistor) Support B57330V2103 from EPCOS	2014-08-04 07:01:35 -07:00
omap-twl4030.h
omap-wd-timer.h
omap1_bl.h
omap_drm.h
pca953x.h	gpio: (gpio-pca953x) move header to linux/platform_data/	2013-08-29 12:33:52 -07:00
pcmcia-pxa2xx_viper.h
pinctrl-adi2.h	pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x.	2013-09-19 14:37:27 +02:00
pinctrl-single.h	pinctrl: single: Add support for auxdata	2013-10-10 15:30:47 -07:00
pn544.h	nfc: Fix FSF address in file headers	2013-12-11 10:56:21 -05:00
pxa2xx_udc.h
pxa_sdhci.h	mmc: sdhci-pxav3: Move private driver data to driver source	2014-11-10 12:40:31 +01:00
remoteproc-omap.h
s3c-hsotg.h
s3c-hsudc.h
sa11x0-serial.h
sc18is602.h
serial-imx.h	serial: imx: Remove init() and exit() platform callbacks	2014-02-28 16:36:45 -08:00
serial-omap.h	ARM: OMAP: serial: remove last vestige of DTR_gpio support.	2014-11-10 09:06:44 -08:00
serial-sccnxp.h	Revert "serial: sccnxp: Add DT support"	2013-08-02 15:25:19 +08:00
sh_ipmmu.h
shmob_drm.h
sht15.h	hwmon: (sht15) add include guard	2014-01-14 21:36:53 -08:00
shtc1.h	hwmon: add support for Sensirion SHTC1 sensor	2014-06-12 08:36:48 -07:00
si5351.h	clk: si5351: remove variant from platform_data	2014-01-27 11:20:22 -08:00
simplefb.h	fbdev changes for 3.12:	2013-09-05 09:49:32 -07:00
spi-clps711x.h
spi-davinci.h
spi-ep93xx.h
spi-imx.h
spi-nuc900.h	spi: nuc900: Cleanup spi-nuc900.h header	2013-12-30 12:46:20 +00:00
spi-omap2-mcspi.h
spi-s3c64xx.h	spi/s3c64xx: Trivial cleanup in header file	2014-02-16 09:59:13 +08:00
ssm2518.h
st21nfca.h	NFC: st21nfca: Adding support for secure element	2015-01-28 00:03:36 +01:00
st21nfcb.h	NFC: st21nfcb: Fix copy/paste error in comment	2015-01-26 23:14:34 +01:00
st1232_pdata.h
st_sensors_pdata.h	iio: Added ST-sensors platform data to select the DRDY interrupt pin	2013-08-03 18:40:28 +01:00
syscon.h	mfd: syscon: Add platform data with a regmap config name	2014-05-15 17:02:19 +01:00
touchscreen-s3c2410.h	Input: s3c2410 - trivial cleanup in header file	2014-02-14 00:09:43 -08:00
tsl2563.h
uio_dmem_genirq.h
uio_pruss.h
usb-davinci.h
usb-ehci-mxc.h	ARM: imx: move EHCI platform defines out of platform_data header	2014-07-18 16:10:04 +08:00
usb-ehci-orion.h	usb: ehci: Cleanup usb-ehci-orion.h header	2014-01-03 12:37:57 -08:00
usb-musb-ux500.h
usb-mx2.h
usb-ohci-pxa27x.h
usb-ohci-s3c2410.h
usb-omap.h
usb-omap1.h	usb: omap1: add extcon to platform data	2013-12-06 14:36:37 -06:00
usb-pxa3xx-ulpi.h
usb-rcar-gen2-phy.h	usb: phy: Add RCAR Gen2 USB phy	2013-10-10 11:59:48 -05:00
usb-rcar-phy.h
usb-s3c2410_udc.h
usb3503.h
ux500_wdt.h
video-clcd-versatile.h	video: fix up versatile CLCD helper move	2014-07-23 17:41:00 +02:00
video-ep93xx.h	video: ep93xx: Cleanup video-ep93xx.h header	2014-01-17 10:57:41 +02:00
video-imxfb.h	video: imxfb: Remove unused fields from platform data structure	2014-02-28 12:35:22 +02:00
video-msm_fb.h	video: msm: Cleanup video-msm_fb.h header	2014-01-17 10:57:42 +02:00
video-mx3fb.h
video-nuc900fb.h
video-pxafb.h	video: pxa: Cleanup video-pxafb.h header	2014-01-17 10:57:42 +02:00
video_s3c.h
voltage-omap.h
vsp1.h	[media] v4l: vsp1: Add LUT support	2013-12-11 09:25:20 -02:00
wiznet.h
zforce_ts.h	Input: add driver for Neonode zForce based touchscreens	2013-10-31 08:46:08 -07:00