android_kernel_msm-6.1_noth.../include/linux/platform_data
Andi Shyti a92e7c3d82 spi: s3c64xx: consider the case when the CS line is not connected
When the CS line is not connected, it is not needed to enable or
disable the chip selection functionality from the s3c64xx
devices in order to perform a transfer.
Set the CS controller logically always enabled already during
initialization (by writing '0' in the S3C64XX_SPI_SLAVE_SEL
register) and never disable it.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-29 22:45:23 +01:00
..
media ARM: OMAP2+: Add more functions to pwm pdata for ir-rx51 2016-04-28 14:26:32 -07:00
ad5449.h
ad5755.h
ad5761.h iio: add ad5761 DAC driver 2016-01-24 14:46:21 +00:00
ad7266.h
ad7291.h staging:iio:ad7291: Move out of staging 2014-07-08 21:17:30 +01:00
ad7298.h
ad7303.h
ad7791.h
ad7793.h
ad7879.h Input: ad7879 - move header to platform_data directory 2016-03-08 10:51:10 -08:00
ad7887.h
adau17x1.h ASoC: adau17x1: Correct typos in file headers 2016-02-24 13:14:05 +09:00
adau1977.h
ads7828.h
arm-ux500-pm.h
asoc-imx-ssi.h
asoc-kirkwood.h
asoc-mx27vis.h
asoc-palm27x.h
asoc-s3c.h ASoC: samsung: pass filter function as pointer 2015-11-21 13:27:22 +00:00
asoc-s3c24xx_simtec.h
asoc-ti-mcbsp.h
asoc-ux500-msp.h
at24.h misc: at24: Fix typo in at24 header file 2016-05-26 20:52:15 +02:00
at91_adc.h
ata-pxa.h
ata-samsung_cf.h ata: pata_samsung_cf: removes s5pc100 related ata codes 2014-06-30 10:48:08 -04:00
atmel.h ARM: SoC platform updates for v4.4 2015-11-10 14:56:23 -08:00
atmel_mxt_ts.h Input: atmel_mxt_ts - use deep sleep mode when stopped 2015-08-04 17:03:52 -07:00
bcmgenet.h net: bcmgenet: enable driver to work without a device tree 2014-12-08 20:26:59 -05:00
bd6107.h
bfin_rotary.h Input: bfin_rotary - move pin lists into into platform data 2015-02-15 16:06:27 -08:00
brcmfmac.h brcmfmac: switch to new platform data 2016-03-07 14:15:50 +02:00
bt-nokia-h4p.h
clk-integrator.h
clk-lpss.h
clk-realview.h
clk-u300.h
clk-ux500.h clk/ARM: move Ux500 PRCC bases to the device tree 2015-08-24 16:49:14 -07:00
cpuidle-exynos.h cpuidle: exynos: add coupled cpuidle support for exynos4210 2015-01-30 08:39:15 +09:00
crypto-atmel.h
crypto-ux500.h
cyttsp4.h
davinci_asp.h
db8500_thermal.h
dma-atmel.h
dma-coh901318.h
dma-dw.h dmaengine: dw: keep entire platform data in struct dw_dma 2016-05-02 15:31:05 +05:30
dma-ep93xx.h
dma-hsu.h dmaengine: hsu: remove platform data 2015-10-17 21:22:08 -07:00
dma-imx-sdma.h dmaengine: imx-sdma: Add support for version 3 firmware 2015-03-18 13:53:33 +05:30
dma-imx.h dmaengine: imx-sdma: Add a new DMATYPE for SAI 2014-11-17 13:50:43 +05:30
dma-mmp_tdma.h dma: mmp_tdma: Fix build for ARM64 2015-02-03 17:47:35 -08:00
dma-mv_xor.h
dma-s3c24xx.h
dma-ste-dma40.h
dmtimer-omap.h
drv260x-pdata.h Input: drv260x - add TI drv260x haptics driver 2014-08-19 22:19:28 -07:00
dwc3-omap.h
edma.h dmaengine updates for 4.5-rc1 2016-01-13 10:59:52 -08:00
efm32-spi.h
efm32-uart.h
ehci-sh.h
elm.h nand: omap2: Remove horrible ifdefs to fix module probe 2014-09-22 11:37:51 -07:00
emif_plat.h
eth-netx.h
fsa9480.h
g762.h
gpio-ath79.h MIPS: ath79: Add OF support to the GPIO driver 2015-06-21 21:54:09 +02:00
gpio-davinci.h
gpio-dwapb.h gpio: dwapb: convert device node to fwnode 2016-04-29 11:23:53 +02:00
gpio-lpc32xx.h
gpio-omap.h gpio: omap: Allow building as a loadable module 2015-05-06 15:23:03 +02:00
gpio-ts5500.h
gpio_backlight.h
gpmc-omap.h ARM: OMAP2+: gpmc: Add gpmc timings and settings to platform data 2016-04-15 11:51:02 +03:00
hsmmc-omap.h ARM: OMAP2: HSMMC: explicit fields to declare cover/card detect pin 2015-03-27 12:19:37 +01:00
hwmon-s3c.h
i2c-cbus-gpio.h
i2c-davinci.h i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery 2015-04-10 17:57:28 +02:00
i2c-designware.h i2c: designware: add support of platform data to set I2C mode 2014-09-29 22:41:17 +02:00
i2c-imx.h
i2c-mux-reg.h i2c: mux: Add register-based mux i2c-mux-reg 2015-08-24 14:05:18 +02:00
i2c-nuc900.h
i2c-s3c2410.h
ina2xx.h
intel-mid_wdt.h watchdog: add Intel MID watchdog driver support 2014-06-10 21:48:16 +02:00
invensense_mpu6050.h iio:imu:mpu6050: enhance mounting matrix support 2016-04-23 22:16:01 +01:00
iommu-omap.h ARM: OMAP2+: Remove omap_mmu_dev_attr structure 2015-11-30 10:35:07 -08:00
irda-pxaficp.h
irda-sa11x0.h arm: sa1100: move irda header to linux/platform_data 2014-12-30 18:44:07 -05:00
isl9305.h regulator: isl9305: Add Intersil ISL9305/H driver 2014-09-06 12:43:05 +01:00
itco_wdt.h mfd: watchdog: iTCO_wdt: Expose watchdog properties using platform data 2015-08-11 15:03:21 +01:00
keyboard-pxa930_rotary.h
keyboard-spear.h Input: update email-id of Rajeev Kumar 2015-05-22 10:59:55 -07:00
keypad-ep93xx.h
keypad-nomadik-ske.h
keypad-omap.h
keypad-pxa27x.h
keypad-w90p910.h
keyscan-davinci.h
lcd-mipid.h
leds-kirkwood-netxbig.h leds: netxbig: add device tree binding 2015-11-03 08:59:25 +01:00
leds-kirkwood-ns2.h leds: leds-ns2: move LED modes mapping outside of the driver 2015-08-28 14:06:06 +02:00
leds-lm355x.h
leds-lm3642.h
leds-lp55xx.h
leds-omap.h
leds-pca963x.h
leds-s3c24xx.h
lm3630a_bl.h
lm3639_bl.h
lp855x.h backlight: lp855x: Use private data for regulator control 2015-08-25 08:40:44 +01:00
lp8727.h
lp8755.h
lv5207lp.h
macb.h net/macb: convert to kernel doc 2015-07-27 01:10:29 -07:00
max197.h
max3421-hcd.h
max6697.h
mdio-gpio.h net: mdio-gpio: move platform data header 2015-10-21 19:50:44 -07:00
mfd-mcp-sa11x0.h
mmc-davinci.h
mmc-esdhc-imx.h mmc: sdhci-esdhc-imx: add tuning-step setting support 2015-08-27 14:50:50 +02:00
mmc-mxcmmc.h
mmc-omap.h mmc: omap_hsmmc: remove prepare/complete system suspend support. 2015-01-19 09:56:08 +01:00
mmc-pxamci.h
mmc-s3cmci.h
mmc-sdhci-s3c.h
mmp_audio.h
mmp_dma.h dmaengine: mmp-pdma: add number of requestors 2016-02-26 22:56:52 +01:00
mouse-pxa930_trkball.h
mtd-davinci-aemif.h
mtd-davinci.h
mtd-mxc_nand.h
mtd-nand-omap2.h mtd: nand: omap2: Implement NAND ready using gpiolib 2016-04-15 11:55:37 +03:00
mtd-nand-pxa3xx.h mtd: pxa3xx_nand: Remove unused platform-data flash specification 2015-09-02 14:11:40 -07:00
mtd-nand-s3c2410.h mtd: nand: s3c2410: kill the ->ecc_layout field 2016-01-26 10:27:35 -08:00
mtd-onenand-omap2.h
mtd-orion_nand.h
mv_usb.h
net-cw1200.h
nfcmrvl.h NFC: nfcmrvl: add i2c driver 2015-10-27 04:21:14 +01:00
ntc_thermistor.h hwmon: (ntc_thermistor) Add support for ncpXXxh103 2016-03-05 06:25:34 -08:00
nxp-nci.h NFC: nxp-nci: Add support for NXP NCI chips 2015-03-26 11:07:50 +01:00
omap-twl4030.h
omap-wd-timer.h
omap1_bl.h
omap_drm.h
pca953x.h
pcmcia-pxa2xx_viper.h
pinctrl-adi2.h
pinctrl-single.h
pixcir_i2c_ts.h Input: pixcir_i2c_ts - switch the device over to gpiod 2015-07-11 17:28:08 -07:00
pn544.h
pwm_omap_dmtimer.h ARM: OMAP2+: Add more functions to pwm pdata for ir-rx51 2016-04-28 14:26:32 -07:00
pxa2xx_udc.h
pxa_sdhci.h mmc: sdhci-pxav3: Move private driver data to driver source 2014-11-10 12:40:31 +01:00
regulator-haptic.h Input: add regulator haptic driver 2014-12-21 18:59:20 -08:00
remoteproc-omap.h
s3c-hsotg.h usb: dwc2: rename all s3c_* to dwc2_* 2015-09-27 10:54:31 -05:00
s3c-hsudc.h
sa11x0-serial.h serial: sa1100: make sa1100_register_uart_fns a function 2016-03-07 16:11:14 -08:00
sc18is602.h
sdhci-pic32.h MIPS: Add support for PIC32MZDA platform 2016-01-24 02:53:28 +01:00
serial-imx.h serial: imx: drop support for IRDA 2015-03-07 03:26:32 +01:00
serial-omap.h ARM: OMAP: serial: Rename DRIVER_NAME 2016-02-06 23:13:30 -08:00
serial-sccnxp.h
sh_ipmmu.h
shmob_drm.h
sht15.h
shtc1.h hwmon: add support for Sensirion SHTC1 sensor 2014-06-12 08:36:48 -07:00
si5351.h clk: si5351: Do not pass struct clk in platform_data 2015-05-08 11:22:30 -07:00
simplefb.h
sky81452-backlight.h backlight: Add support Skyworks SKY81452 backlight driver 2015-03-12 09:08:19 +00:00
spi-clps711x.h
spi-davinci.h spi: davinci: Choose correct pre-scaler limit based on SOC 2015-07-24 17:35:51 +01:00
spi-ep93xx.h
spi-imx.h
spi-mt65xx.h spi: mediatek: fix spi incorrect endian usage 2015-08-20 11:09:47 -07:00
spi-nuc900.h
spi-omap2-mcspi.h
spi-s3c64xx.h spi: s3c64xx: consider the case when the CS line is not connected 2016-06-29 22:45:23 +01:00
ssm2518.h
st-nci.h NFC: st-nci: Add ese-present/uicc-present dts properties 2015-10-27 03:55:10 +01:00
st21nfca.h NFC: st21nfca: Adding support for secure element 2015-01-28 00:03:36 +01:00
st33zp24.h tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy) 2015-03-18 22:43:06 +01:00
st1232_pdata.h
st_sensors_pdata.h iio: st_sensors: support open drain mode 2016-04-19 19:58:13 +01:00
syscon.h
touchscreen-s3c2410.h ARM: s3c64xx: use new adc/touchscreen driver 2015-12-01 21:50:25 +01:00
tsl2563.h
uio_dmem_genirq.h
uio_pruss.h
usb-davinci.h
usb-ehci-mxc.h ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
usb-ehci-orion.h
usb-musb-ux500.h
usb-mx2.h
usb-ohci-pxa27x.h
usb-ohci-s3c2410.h
usb-omap.h
usb-omap1.h
usb-pxa3xx-ulpi.h
usb-s3c2410_udc.h
usb3503.h
ux500_wdt.h
video-clcd-versatile.h video: fix up versatile CLCD helper move 2014-07-23 17:41:00 +02:00
video-ep93xx.h ARM/fb: ep93xx: switch framebuffer to use modedb only 2015-08-13 12:25:44 +02:00
video-imxfb.h
video-mx3fb.h
video-nuc900fb.h
video-pxafb.h
video_s3c.h
voltage-omap.h
wiznet.h
wkup_m3.h remoteproc/wkup_m3: add a remoteproc driver for TI Wakeup M3 2015-06-17 09:58:08 +03:00
zforce_ts.h Input: zforce_ts - convert to use the gpiod interface 2015-07-08 21:50:57 -07:00