Russell King e6818d29ea gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup ... The GPIO block can enter idle independently of the CPU power management calls via smart-idle. When the GPIO block enters idle, level detection stops working due to clocks being shut off, and an alternative form of edge detection is used. However, this needs the edge detection registers set to mark the appropriate edges. Arrange to configure the edge detection enables along with the level detection to ensure that any transition to active interrupt state that occurs while the block is idle is detected as a wake-up event. Since we enable the edge detection when configuring the IRQ, both omap2_gpio_enable_level_quirk() nor omap2_gpio_disable_level_quirk() become redundant, which also means OMAP_GPIO_QUIRK_IDLE_REMOVE_TRIGGER can be removed. This can be now done without regressions as patch "gpio: gpio-omap: fix level interrupt idling" allows level interrupts to idle on omap4 without a workaround. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [tony@atomide.com: update description for the fix dependency] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>		2019-04-11 15:13:33 +02:00
..
gpio	gpio: amd-fch: Fix bogus SPDX identifier	2019-03-22 16:48:47 +01:00
jz4740	MIPS: jz4740: Move jz4740_nand.h header to include/linux/platform_data/jz4740	2018-07-18 10:10:23 +02:00
media	media: include: fix several typos	2019-03-01 09:45:52 -05:00
txx9	MIPS: txx9: Move the ndfc.h header to include/linux/platform_data/txx9	2018-07-18 10:10:23 +02:00
x86	clk: x86: Move clk-lpss.h to platform_data/x86	2019-02-22 00:14:31 -08:00
ad5449.h
ad5755.h
ad5761.h
ad7266.h
ad7291.h
ad7298.h
ad7303.h
ad7791.h
ad7793.h
ad7887.h
adau17x1.h
adau1977.h
adp5588.h
adp8860.h
adp8870.h
ads1015.h
ads7828.h
ams-delta-fiq.h	Input: ams_delta_serio: Get FIQ buffer from platform_data	2018-07-02 23:05:14 -07:00
apds990x.h
arm-ux500-pm.h
asoc-imx-ssi.h
asoc-kirkwood.h
asoc-mx27vis.h
asoc-palm27x.h
asoc-s3c.h
asoc-s3c24xx_simtec.h
asoc-ti-mcbsp.h
asoc-ux500-msp.h
at91_adc.h
ata-pxa.h
ata-samsung_cf.h
atmel.h
b53.h	net: dsa: Include platform_data header file	2019-01-17 11:31:24 -08:00
bcmgenet.h
bd6107.h
bh1770glc.h
brcmfmac.h
clk-da8xx-cfgchip.h
clk-davinci-pll.h
clk-integrator.h
clk-st.h	clk: x86: Add ST oscout platform clock	2018-05-17 12:44:06 +02:00
clk-u300.h
cpuidle-exynos.h
crypto-atmel.h
crypto-ux500.h
cyttsp4.h
davinci-cpufreq.h	cpufreq: davinci: move configuration to include/linux/platform_data	2019-02-18 11:58:08 +05:30
davinci_asp.h	ASoC: davinci-mcasp: Implement configurable dismod handling	2018-11-28 12:41:31 +00:00
db8500_thermal.h
dma-atmel.h
dma-coh901318.h
dma-dw.h	dmaengine: dw: convert to SPDX identifiers	2019-01-07 17:57:13 +05:30
dma-ep93xx.h	dmaengine: ep93xx: Return proper enum in ep93xx_dma_chan_direction	2018-10-02 20:11:00 +05:30
dma-hsu.h
dma-imx-sdma.h
dma-imx.h	dmaengine: imx-sdma: add a test for imx8mq multi sdma devices	2019-02-25 23:25:51 +05:30
dma-mcf-edma.h	dmaengine: fsl-edma: add ColdFire mcf5441x edma support	2018-09-11 12:06:39 +05:30
dma-mmp_tdma.h
dma-mv_xor.h
dma-s3c24xx.h
dma-ste-dma40.h
dmtimer-omap.h
ds620.h
dsa.h	net: dsa: Split platform data to header file	2019-01-17 11:31:24 -08:00
dwc3-omap.h
edma.h
efm32-spi.h
efm32-uart.h
ehci-sh.h	usb: ehci-sh: convert to SPDX identifiers	2018-09-10 19:58:49 +02:00
elm.h
emif_plat.h
eth-netx.h
fsa9480.h
g762.h
gpio-ath79.h
gpio-davinci.h	gpio: davinci: restore a way to manually specify the GPIO base	2018-11-26 16:45:10 +05:30
gpio-dwapb.h	gpio: dwapb: Fix rework support for 1 interrupt per port A GPIO	2018-05-28 09:45:27 +02:00
gpio-htc-egpio.h
gpio-omap.h	gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup	2019-04-11 15:13:33 +02:00
gpio_backlight.h
gpmc-omap.h
hsmmc-omap.h	mmc: omap_hsmmc: Delete platform data GPIO CD and WP	2018-10-08 11:40:43 +02:00
hwmon-s3c.h
i2c-davinci.h
i2c-designware.h
i2c-gpio.h	i2c: gpio: move header to platform_data	2018-05-17 16:27:09 +02:00
i2c-hid.h	HID: i2c-hid: Add vddl regulator control	2018-06-25 15:12:42 +02:00
i2c-imx.h
i2c-mux-gpio.h	i2c: mux: gpio: move header to platform_data	2018-05-17 16:27:52 +02:00
i2c-mux-reg.h
i2c-ocores.h	i2c: ocores: Add support for bus clock via platform data	2019-02-14 17:58:23 +01:00
i2c-omap.h	i2c: omap: move header to platform_data	2018-05-17 16:27:58 +02:00
i2c-pca-platform.h	i2c: pca-platform: move header to platform_data	2018-05-17 16:27:58 +02:00
i2c-pxa.h
i2c-s3c2410.h
i2c-xiic.h	i2c: xiic: move header to platform_data	2018-05-17 16:27:59 +02:00
ina2xx.h	hwmon: (ina2xx) fix sysfs shunt resistor read access	2018-08-26 17:45:25 -07:00
intel-mid_wdt.h
intel-spi.h
invensense_mpu6050.h
iommu-omap.h
irda-pxaficp.h
irda-sa11x0.h
isl9305.h
itco_wdt.h
keyboard-pxa930_rotary.h
keyboard-spear.h
keypad-ep93xx.h
keypad-nomadik-ske.h
keypad-omap.h
keypad-pxa27x.h
keypad-w90p910.h
keyscan-davinci.h
lcd-mipid.h
leds-kirkwood-netxbig.h
leds-kirkwood-ns2.h
leds-lm355x.h
leds-lm3642.h
leds-lp55xx.h
leds-omap.h
leds-pca963x.h
leds-s3c24xx.h
lm3630a_bl.h
lm3639_bl.h
lm8323.h
lp855x.h
lp8727.h
lp8755.h
ltc4245.h
lv5207lp.h
macb.h
max197.h
max732x.h
max3421-hcd.h
max6639.h
max6697.h
mcs.h
mdio-bcm-unimac.h
mdio-gpio.h	net: phy: mdio-gpio: Add phy_ignore_ta_mask to platform data	2018-12-08 21:33:30 -08:00
mfd-mcp-sa11x0.h
microchip-ksz.h
mlxreg.h	linux-watchdog 5.1-rc1 tag	2019-03-11 11:22:15 -07:00
mmc-davinci.h
mmc-esdhc-imx.h	mmc: sdhci: imx: Use the slot GPIO descriptor	2018-12-17 08:26:24 +01:00
mmc-mxcmmc.h
mmc-omap.h
mmc-pxamci.h	mmc: pxa: Use GPIO descriptor for power	2018-12-17 08:26:24 +01:00
mmc-s3cmci.h	mmc: s3cmci: Use the slot GPIO descriptor	2018-12-17 08:26:24 +01:00
mmc-sdhci-s3c.h
mmp_audio.h
mmp_dma.h	dmaengine: pxa: use a dma slave map	2018-06-18 21:28:44 +02:00
mouse-pxa930_trkball.h
mtd-davinci-aemif.h	ARM: davinci: unduplicate aemif support	2018-07-10 15:39:27 +05:30
mtd-davinci.h	mtd: rawnand: davinci: store the core chipselect number in platform data	2018-05-02 14:58:30 +05:30
mtd-mxc_nand.h
mtd-nand-omap2.h
mtd-nand-pxa3xx.h
mtd-nand-s3c2410.h
mtd-orion_nand.h	mtd: rawnand: orion_nand: Kill orion_nand_data.dev_ready()	2018-07-18 10:10:12 +02:00
mv88e6xxx.h	net: dsa: Include platform_data header file	2019-01-17 11:31:24 -08:00
mv_usb.h	USB: EHCI: ehci-mv: remove private_init	2018-09-20 13:07:55 +02:00
net-cw1200.h
nfcmrvl.h
ntc_thermistor.h	hwmon: (ntc_thermistor) use a table to lookup the thermistor type	2018-12-16 15:13:21 -08:00
nxp-nci.h
omap-twl4030.h
omap-wd-timer.h
omap1_bl.h
omapdss.h
pca953x.h
pca954x.h
pcf857x.h
pcmcia-pxa2xx_viper.h
phy-da8xx-usb.h
pinctrl-single.h
pixcir_i2c_ts.h
pm33xx.h	ARM: OMAP2+: sleep33/43xx: Add RTC-Mode support	2018-07-09 23:01:34 -07:00
pwm_omap_dmtimer.h
pxa2xx_udc.h
pxa_sdhci.h	mmc: sdhci: pxav3: Delete GPIO handling	2018-10-08 11:40:43 +02:00
regulator-haptic.h
remoteproc-omap.h
rtc-ds2404.h
rtc-v3020.h
s3c-hsotg.h
s3c-hsudc.h
sa11x0-serial.h
sc18is602.h	fix a series of Documentation/ broken file name references	2018-06-15 18:10:01 -03:00
sdhci-pic32.h
serial-imx.h
serial-omap.h
serial-sccnxp.h
shmob_drm.h	drm: shmobile: convert to SPDX identifiers	2018-09-14 13:54:02 +03:00
sht3x.h
shtc1.h
si5351.h
simplefb.h
sky81452-backlight.h
spi-ath79.h	spi: ath79: Enable support for compile test	2019-01-17 12:34:47 +00:00
spi-clps711x.h
spi-davinci.h	spi: davinci: Remove chip select GPIO pdata	2018-09-11 17:37:15 +01:00
spi-ep93xx.h
spi-imx.h
spi-mt65xx.h
spi-nuc900.h
spi-omap2-mcspi.h
spi-s3c64xx.h
ssm2518.h
st33zp24.h
st_sensors_pdata.h	iio: imu: st_lsm6dsx: add i2c embedded controller support	2018-11-16 18:32:33 +00:00
syscon.h
tc35876x.h
tda9950.h
ti-aemif.h
ti-sysc.h	bus: ti-sysc: Defer suspend as needed	2018-09-24 12:16:54 -07:00
touchscreen-s3c2410.h
tsc2007.h
tsl2563.h
tsl2772.h	staging: iio: tsl2x7x/tsl2772: move out of staging	2018-05-12 12:40:04 +01:00
uio_dmem_genirq.h
uio_pruss.h
usb-davinci.h	usb: ohci-da8xx: remove unused callbacks from platform data	2019-02-12 13:48:59 +05:30
usb-ehci-mxc.h
usb-ehci-orion.h
usb-musb-ux500.h
usb-mx2.h
usb-ohci-pxa27x.h
usb-ohci-s3c2410.h
usb-omap.h
usb-omap1.h
usb-pxa3xx-ulpi.h
usb-s3c2410_udc.h
usb3503.h
ux500_wdt.h
video-clcd-versatile.h
video-ep93xx.h
video-imxfb.h
video-mx3fb.h
video-nuc900fb.h
video-pxafb.h
video_s3c.h
voltage-omap.h
wilco-ec.h	platform/chrome: wilco_ec: Add RTC driver	2019-02-21 21:36:53 +01:00
wiznet.h
wkup_m3.h
zforce_ts.h