# Derivation and Deriving Path

So far, we have covered "inert" [store objects][store object].
But the point of the Nix store layer is to be a build system.
Other system (like Git or IPFS) also store and transfer immutable data, but they don't concern themselves with *how* that data was created.

This is where Nix distinguishes itself.
*Derivations* represent individual build steps, and *deriving paths* are needed to to the *outputs* of those build steps.
The two concepts need to be introduced together because, as described below, each depends on the other.

## Derivation {#derivation}

A derivation is a specification for running an executable on precisely defined input files to repeatably produce output files at uniquely determined file system paths.

What is natural Unix analog for a build step *in action*?
Answer: a process that will eventually exit, leaving behind some output date.
What is the natural way to *plan* such a step?
An `execve` system call.

A derivation consists of:

 - A (base) name

 - A set of *outputs*, consisting of names and possibly other data

 - A set of *inputs*, a set of [deriving paths](#deriving-path)

 - Everything needed for an `execve` system call:
   1. Path to executable
   2. A list of arguments (except for `argv[0]`, which is taken from the path in the usual way)
   3. A set of environment variables.

 - A two-component "system" name (e.g. `x86_64-linux`) where the executable is to run.

The information needed for the `execve` system call will presumably include many [store paths][store path]:

 - The path to the executable is almost surely starts with a store path
 - The arguments and environment variables likely contain many other store paths.

But just as we stored the references contained in the file data separately for store objects, so we store the set of inputs separately.

Finally, the system name is included take advantage of the fact that Nix allows *heterogenous* build plans, where not all steps can be run on the same machine or same sort of machine.

The process's job is to produce the outputs, but have no other important side effects.
The rules around this will be discussed in following sections.

### Referencing derivations

Derivations are always referred to by the [store path] of the store object they are encoded to.
See the encoding [encoding section](#derivation-encoding) for more details on how this encoding works, and thus what exactly what store path we would end up with for a given derivations.

The store path of the store object which encodes a derivation is often called a "derivation path" for brevity.

### Outputs {#outputs}

The outputs are the derivations are the [store objects][store object] it is obligated to produce.

Outputs are assigned names, and also consistent of other information based on the type of derivation.

Output names can be any string which is also a valid [store path] name.
The store path of the output store object (also called an [output path] for short), has a name based on the derivation name and the output name.
Most outputs are named `drvMame + '-' + outputName`.
However, an output named "out" is just has name `drvName`.
This is to allow derivations with a single output to avoid a superfluous `-<outputName>` in their single output's name when no disambiguation is needed.

> **Example**
>
> A derivation is named `hello`, and has two outputs, `out`, and `dev`
>
> - The derivation's path will be: `/nix/store/<hash>-hello.drv`.
>
> - The store path of `out` will be: `/nix/store/<hash>-hello`.
>
> - The store path of `dev` will be: `/nix/store/<hash>-hello-dev`.

### System {#system}

The system type on which the [`builder`](#attr-builder) executable is meant to be run.

A necessary condition for Nix to build derivations locally is that the `system` attribute matches the current [`system` configuration option].
It can automatically [build on other platforms](@docroot@/language/derivations.md#attr-builder) by forwarding build requests to other machines.

[`system` configuration option]: @docroot@/command-ref/conf-file.md#conf-system


### Builder {#builder}

Path to an executable that will perform the build.

### Args {#args}

Command-line arguments to be passed to the [`builder`](#builder) executable.

### Environment Variables {#env}

Environment variables which will be passed to the [`builder`](#builder) executable.

### Placeholder

TODO

Two types:

- Reference to own outputs

- output derived paths (see below), corresponding to store paths we haven't yet realized.

> N.B. Current method of creating hashes which we substitute for string fields should be seen as an artifact of the current "ATerm" serialization format.
> In order to be more explicit, and avoid gotchas analogous to [SQL injection](https://en.wikipedia.org/wiki/SQL_injection),
> we ought to consider switching two a different format where we explicitly use a syntax for a oncatentation of plain strings and placeholders written more explicitly.

### Inputs

The inputs are a set of [deriving paths].
Each of these must be [realised] prior to building the derivation in
question.
At that point, the derivation can be normalized replacing each input
derived path with its store path --- which we now now since we've
realised it.

## Deriving path {#deriving-path}

Deriving paths are a way to refer to [store objects][store object] that might not yet be [realised][realise].
This is necessary because, in general and particularly for [content-addressed derivations][content-addressed derivation], the [store path] of an [output] is not known in advance.
There are two forms:

- *constant*: just a [store path]
  It can be made [valid][validity] by copying it into the store: from the evaluator, command line interface or another st    ore.

- *output*: a pair of a [store path] to a [derivation] and an [output] name.

In pseudo code:

```idris
type OutputName = String

data DerivingPath
  = ConstantPath { path : StorePath }
  | Output {
      drvPath : StorePath,
      output  : OutputName,
    }
```

[content-addressed derivation]: @docroot@/glossary.md#gloss-content-addressed-derivation
[realise]: @docroot@/glossary.md#gloss-realise
[store object]: @docroot@/store/store-object.md
[store path]: @docroot@/store/store-path.md

## Encoding

### Derivation {#derivation-encoding}

There are two formats, documented separately:

- The legacy ["ATerm" format](@docroot@/protocols/derivation-aterm.md)

- The modern [JSON format](@docroot@/protocols/json/derivation.md)

Currently derivations are always serialized to store objects using the "ATerm" format, but this is subject to change.

Regardless of the format used, when serializing to store object, content-addressing is always used.
In the common case the inputs to store objects are either:

 - constant deriving paths for content-addressed source objects, which are "initial inputs" rather than the outputs of some other derivation (except in the case of bootstrap binaries).

 - the outputs of other derivations abiding by this same invariant.

This common case makes for the following useful property:
when we serialize such a derivation graph to store objects, the resulting closures are *entirely* content-addressed.

Here is a sketch at the proof of this:

 - The inputs which are constant deriving paths become references of the serialized derivations, but they are content-addressed per the above.

 - For inputs which are output deriving paths, we cannot directly reference the input because in general it is not built yet.
   We instead "peal back" the output deriving path to take its underlying serialized derivation (the `drvPath` field), and reference that.
   Since it is a derivation, it must be content-addressed

 - There are no other ways a store object would end up in an input closure.
   The references of a derivation in store object form always come from solely from the inputs of the derivation.

### Deriving Path {#deriving-path-encoding}

- *constant*

  Constant deriving paths are encoded simply as the underlying store path is.
  Thus, we see that every encoded store path is also a valid encoded (constant) deriving path.

- *output*

  Output deriving paths are encoded by

  - encoding of a store path referring to a derivation

  - a separator (`^` or `!` depending on context)

  - the name of an output

  > **Example**
  >
  > ```
  > /nix/store/lxrn8v5aamkikg6agxwdqd1jz7746wz4-firefox-98.0.2.drv^out
  > ```
  >
  > This parses like so:
  >
  > ```
  > /nix/store/lxrn8v5aamkikg6agxwdqd1jz7746wz4-firefox-98.0.2.drv^out
  > |------------------------------------------------------------| |-|
  > store path (usual encoding)                                    output name
  >                                                           |--|
  >                                                           note the ".drv"
  > ```

## Extending the model to be higher-order

**Experimental feature**: [`dynamic-derivations`](@docroot@/development/experimental-features.md#xp-feature-dynamic-derivations)

We can apply the same extension discussed for the abstract model to the concrete model.
Again, only the data type for Deriving Paths needs to be modified.
Derivations are the same except for using the new extended deriving path data type.

```idris
type OutputName = String

data DerivingPath
  = ConstantPath { storeObj : StorePath }
  | Output {
      drv    : DerivingPath, -- Note: changed
      output : OutputName,
    }
```

Now, the `drv` field of `Output` is itself a `DerivingPath` instead of an `StorePath`.

Under this extended model, `DerivingPath`s are thus inductively built up from an `ConstantPath`, contains in 0 or more outer `Output`s.

### Encoding {#deriving-path-encoding}

The encoding is adjusted in a very simplest way, merely displaying the same

```
/nix/store/lxrn8v5aamkikg6agxwdqd1jz7746wz4-firefox-98.0.2.drv^foo.drv^bar.drv^out
|----------------------------------------------------------------------------| |-|
inner deriving path (usual encoding)                                           output name
|--------------------------------------------------------------------| |-----|
even more inner deriving path (usual encoding)                         output name
|------------------------------------------------------------| |-----|
innermost constant store path (usual encoding)                 output name
```

## Extra extensions

### `__structuredAttrs`

Historically speaking, most users of Nix made GNU Bash with a script the command run, regardless of what they were doing.
Bash variable are automatically created from env vars, but bash also supports array and string-keyed map variables in addition to string variables.
People also usually create derivations using language which also support these richer data types.
It was thus desired a way to get this data from the language "planning" the derivation to language to bash, the language evaluated at "run time".

`__structuredAttrs` does this by smuggling inside the core derivation format a map of named richer data.
At run time, this becomes two things:

1. A JSON file containing that map.
2. A bash script setting those variables.

The bash command can be passed a script which will "source" that Nix-created bash script, setting those variables with the richer data.
The outer script can then do whatever it likes with those richer variables as input.

However, since derivations can already contain arbitary input sources, the vast majority of `__structuredAttrs` can be handled by upper layers.
We might consider implementing `__structuredAttrs` in higher layers in the future, and simplifying the store layer.