[ Upstream commit d20a3a8a32e3fa564ff25da860c5fc1a97642dfe ]
The driver fails to link when CONFIG_POWER_SUPPLY is disabled:
x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_psy_get_prop':
extcon-intel-cht-wc.c:(.text+0x15ccda7): undefined reference to `power_supply_get_drvdata'
x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_pwrsrc_event':
extcon-intel-cht-wc.c:(.text+0x15cd3e9): undefined reference to `power_supply_changed'
x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_probe':
extcon-intel-cht-wc.c:(.text+0x15cd596): undefined reference to `devm_power_supply_register'
It should be possible to change the driver to not require this at
compile time and still provide other functions, but adding a hard
Kconfig dependency does not seem to have any practical downsides
and is simpler since the option is normally enabled anyway.
Fixes: 66e31186cd ("extcon: intel-cht-wc: Add support for registering a power_supply class-device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79038a99445f69c5d28494dd4f8c6f0509f65b2e ]
In some randconfig builds, kernfs ends up being disabled, so there is no prototype
for kernfs_generic_poll()
In file included from kernel/sched/build_utility.c:97:
kernel/sched/psi.c:1479:3: error: implicit declaration of function 'kernfs_generic_poll' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
kernfs_generic_poll(t->of, wait);
^
Add a stub helper for it, as we have it for other kernfs functions.
Fixes: aff037078ecae ("sched/psi: use kernfs polling functions for PSI trigger polling")
Fixes: 147e1a97c4 ("fs: kernfs: add poll file operation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20230724121823.1357562-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f429378a9bf84d79a7e2cae05d2e3384cf7d68ba ]
When test_remove is enabled really_probe() does not properly pair
dma_configure() with dma_remove(), it will end up calling dma_configure()
twice. This corrupts the owner_cnt and renders the group unusable with
VFIO/etc.
Add the missing cleanup before going back to re_probe.
Fixes: 25f3bcfc54 ("driver core: Add dma_cleanup callback in bus_type")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Closes: https://lore.kernel.org/all/6472f254-c3c4-8610-4a37-8d9dfdd54ce8@huawei.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v2-4deed94e283e+40948-really_probe_dma_cleanup_jgg@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22d2381bbd70a5853c2ee77522f4965139672db9 ]
The test_platform_device_register_node() function should return error
pointers instead of NULL. That is what the callers are expecting.
Fixes: 57ea974fb8 ("driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/1e11ed19-e1f6-43d8-b352-474134b7c008@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05d56d8079d510a2994039470f65bea85f0075ee ]
Fixes the warning:
include/uapi/linux/sync_file.h:77: warning: Function parameter or member 'num_fences' not described in 'sync_file_info'
Fixes: 2d75c88fef ("staging/android: refactor SYNC IOCTLs")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230724145000.125880-1-robdclark@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e048e9b7a160f7112069c0ec2947be15f3e8154 ]
Enable the generic .sync_state callback to ensure there are no
outstanding votes that would waste power.
Generally one would need a bunch of interface clocks to access the QoS
registers when trying to go over all possible nodes during sync_state,
but QCM2290 surprisingly does not seem to require any such handling.
Fixes: 1a14b1ac39 ("interconnect: qcom: Add QCM2290 driver support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230720-topic-qcm2290_icc-v2-2-a2ceb9d3e713@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd380097cdb305582b7a1f9476391330299d2c59 ]
Perf cs_etm session executed unexpectedly when AUX buffer > 1G.
perf record -C 0 -m ,2G -e cs_etm// -- <workload>
[ perf record: Captured and wrote 2.615 MB perf.data ]
Perf only collect about 2M perf data rather than 2G. This is becasuse
the operation, "nr_pages << PAGE_SHIFT", in coresight tmc driver, will
overflow when nr_pages >= 0x80000(correspond to 1G AUX buffer). The
overflow cause buffer allocation to fail, and TMC driver will alloc
minimal buffer size(1M). You can just get about 2M perf data(1M AUX
buffer + perf data header) at least.
Explicit convert nr_pages to 64 bit to avoid overflow.
Fixes: 22f429f19c ("coresight: etm-perf: Add support for ETR backend")
Fixes: 99443ea19e ("coresight: Add generic TMC sg table framework")
Fixes: 2e499bbc1a ("coresight: tmc: implementing TMC-ETF AUX space API")
Signed-off-by: Ruidong Tian <tianruidong@linux.alibaba.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230804081514.120171-2-tianruidong@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38313c6d2a02c28162e06753b01bd885caf9386d ]
One-element and zero-length arrays are deprecated. So, replace
one-element array in struct irdma_qvlist_info with flexible-array
member.
A patch for this was sent a while ago[1]. However, it seems that, at
the time, the changes were partially folded[2][3], and the actual
flexible-array transformation was omitted. This patch fixes that.
The only binary difference seen before/after changes is shown below:
| drivers/infiniband/hw/irdma/hw.o
| @@ -868,7 +868,7 @@
| drivers/infiniband/hw/irdma/hw.c:484 (discriminator 2)
| size += struct_size(iw_qvlist, qv_info, rf->msix_count);
| 55b: imul $0x45c,%rdi,%rdi
|- 562: add $0x10,%rdi
|+ 562: add $0x4,%rdi
which is, of course, expected as it reflects the mistake made
while folding the patch I've mentioned above.
Worth mentioning is the fact that with this change we save 12 bytes
of memory, as can be inferred from the diff snapshot above. Notice
that:
$ pahole -C rdma_qv_info idrivers/infiniband/hw/irdma/hw.o
struct irdma_qv_info {
u32 v_idx; /* 0 4 */
u16 ceq_idx; /* 4 2 */
u16 aeq_idx; /* 6 2 */
u8 itr_idx; /* 8 1 */
/* size: 12, cachelines: 1, members: 4 */
/* padding: 3 */
/* last cacheline: 12 bytes */
};
Link: https://lore.kernel.org/linux-hardening/20210525230038.GA175516@embeddedor/ [1]
Link: https://lore.kernel.org/linux-hardening/bf46b428deef4e9e89b0ea1704b1f0e5@intel.com/ [2]
Link: https://lore.kernel.org/linux-rdma/20210520143809.819-1-shiraz.saleem@intel.com/T/#u [3]
Fixes: 44d9e52977 ("RDMA/irdma: Implement device initialization definitions")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZMpsQrZadBaJGkt4@work
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31b5991a9a91ba97237ac9da509d78eec453ff72 ]
The qedf_dbg_debug_cmd_read() function invokes sprintf() directly on a
__user pointer, which may crash the kernel.
Avoid doing that by using a small on-stack buffer for scnprintf() and then
calling simple_read_from_buffer() which does a proper copy_to_user() call.
Fixes: 61d8658b4a ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Link: https://lore.kernel.org/lkml/20230724120241.40495-1-oleksandr@redhat.com/
Link: https://lore.kernel.org/linux-scsi/20230726101236.11922-1-skashyap@marvell.com/
Cc: Saurav Kashyap <skashyap@marvell.com>
Cc: Rob Evers <revers@redhat.com>
Cc: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Jozef Bacik <jobacik@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Oleksandr Natalenko <oleksandr@redhat.com>
Link: https://lore.kernel.org/r/20230731084034.37021-3-oleksandr@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d3d20dee4f648ec44e9717d5f647d594d184433 ]
The qedf_dbg_stop_io_on_error_cmd_read() function invokes sprintf()
directly on a __user pointer, which may crash the kernel.
Avoid doing that by using a small on-stack buffer for scnprintf() and then
calling simple_read_from_buffer() which does a proper copy_to_user() call.
Fixes: 61d8658b4a ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Link: https://lore.kernel.org/lkml/20230724120241.40495-1-oleksandr@redhat.com/
Link: https://lore.kernel.org/linux-scsi/20230726101236.11922-1-skashyap@marvell.com/
Cc: Saurav Kashyap <skashyap@marvell.com>
Cc: Rob Evers <revers@redhat.com>
Cc: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Jozef Bacik <jobacik@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Oleksandr Natalenko <oleksandr@redhat.com>
Link: https://lore.kernel.org/r/20230731084034.37021-2-oleksandr@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d122db2ff80cd2aed4dcd630befb56b51ddf947 ]
If a send packet is dropped by the IP layer in rxe_requester()
the call to rxe_xmit_packet() can fail with err == -EAGAIN.
To recover, the state of the wqe is restored to the state before
the packet was sent so it can be resent. However, the routines
that save and restore the state miss a significnt part of the
variable state in the wqe, the dma struct which is used to process
through the sge table. And, the state is not saved before the packet
is built which modifies the dma struct.
Under heavy stress testing with many QPs on a fast node sending
large messages to a slow node dropped packets are observed and
the resent packets are corrupted because the dma struct was not
restored. This patch fixes this behavior and allows the test cases
to succeed.
Fixes: 3050b99850 ("IB/rxe: Fix race condition between requester and completer")
Link: https://lore.kernel.org/r/20230721200748.4604-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dccb23f6c312e4480fe32ccbc2afac1a5cac7e5e ]
Split rxe_run_task(task, sched) into rxe_run_task(task) and
rxe_sched_task(task).
Link: https://lore.kernel.org/r/20221021200118.2163-5-rpearsonhpe@gmail.com
Signed-off-by: Ian Ziemba <ian.ziemba@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: 5d122db2ff80 ("RDMA/rxe: Fix incomplete state save in rxe_requester")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ba2909638a29630a346d6c4907a3105409bee7d ]
This source file already includes <linux/miscdevice.h>, which contains
the same macro. It doesn't need to be defined here again.
Fixes: 874bcd00f5 ("apm-emulation: move APM_MINOR_DEV to include/linux/miscdevice.h")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: x86@kernel.org
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20230728011120.759-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9608f1887568b728839d006024585ab02ef29e5 ]
The global pointer 'sprd_port' may not zero when sprd_probe returns
failure, that is a risk for sprd_port to be accessed afterward, and
may lead to unexpected errors.
For example:
There are two UART ports, UART1 is used for console and configured in
kernel command line, i.e. "console=";
The UART1 probe failed and the memory allocated to sprd_port[1] was
released, but sprd_port[1] was not set to NULL;
In UART2 probe, the same virtual address was allocated to sprd_port[2],
and UART2 probe process finally will go into sprd_console_setup() to
register UART1 as console since it is configured as preferred console
(filled to console_cmdline[]), but the console parameters (sprd_port[1])
belong to UART2.
So move the sprd_port[] assignment to where the port already initialized
can avoid the above issue.
Fixes: b7396a38fb ("tty/serial: Add Spreadtrum sc9836-uart driver support")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20230725064053.235448-1-chunyan.zhang@unisoc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47cd3770e31df942e2bb925a9a855c79ed0662eb ]
There are three places that qla4xxx parses nlattrs:
- qla4xxx_set_chap_entry()
- qla4xxx_iface_set_param()
- qla4xxx_sysfs_ddb_set_param()
and each of them directly converts the nlattr to specific pointer of
structure without length checking. This could be dangerous as those
attributes are not validated and a malformed nlattr (e.g., length 0) could
result in an OOB read that leaks heap dirty data.
Add the nla_len check before accessing the nlattr data and return EINVAL if
the length check fails.
Fixes: 26ffd7b45f ("[SCSI] qla4xxx: Add support to set CHAP entries")
Fixes: 1e9e2be3ee ("[SCSI] qla4xxx: Add flash node mgmt support")
Fixes: 00c31889f7 ("[SCSI] qla4xxx: fix data alignment and use nl helpers")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20230723080053.3714534-1-linma@zju.edu.cn
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee0268f230f66cb472df3424f380ea668da2749a ]
beiscsi_iface_set_param() parses nlattr with nla_for_each_attr and assumes
every attributes can be viewed as struct iscsi_iface_param_info.
This is not true because there is no any nla_policy to validate the
attributes passed from the upper function iscsi_set_iface_params().
Add the nla_len check before accessing the nlattr data and return EINVAL if
the length check fails.
Fixes: 0e43895ec1 ("[SCSI] be2iscsi: adding functionality to change network settings using iscsiadm")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20230723075938.3713864-1-linma@zju.edu.cn
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce51c817008450ef4188471db31639d42d37a5e1 ]
The functions iscsi_if_set_param() and iscsi_if_set_host_param() convert an
nlattr payload to type char* and then call C string handling functions like
sscanf and kstrdup:
char *data = (char*)ev + sizeof(*ev);
...
sscanf(data, "%d", &value);
However, since the nlattr is provided by the user-space program and the
nlmsg skb is allocated with GFP_KERNEL instead of GFP_ZERO flag (see
netlink_alloc_large_skb() in netlink_sendmsg()), dirty data on the heap can
lead to an OOB access for those string handling functions.
By investigating how the bug is introduced, we find it is really
interesting as the old version parsing code starting from commit
fd7255f51a ("[SCSI] iscsi: add sysfs attrs for uspace sync up") treated
the nlattr as integer bytes instead of string and had length check in
iscsi_copy_param():
if (ev->u.set_param.len != sizeof(uint32_t))
BUG();
But, since the commit a54a52caad ("[SCSI] iscsi: fixup set/get param
functions"), the code treated the nlattr as C string while forgetting to
add any strlen checks(), opening the possibility of an OOB access.
Fix the potential OOB by adding the strlen() check before accessing the
buf. If the data passes this check, all low-level set_param handlers can
safely treat this buf as legal C string.
Fixes: fd7255f51a ("[SCSI] iscsi: add sysfs attrs for uspace sync up")
Fixes: 1d9bf13a9c ("[SCSI] iscsi class: add iscsi host set param event")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20230723075820.3713119-1-linma@zju.edu.cn
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 971dfcb74a800047952f5288512b9c7ddedb050a ]
The current NETLINK_ISCSI netlink parsing loop checks every nlmsg to make
sure the length is bigger than sizeof(struct iscsi_uevent) and then calls
iscsi_if_recv_msg().
nlh = nlmsg_hdr(skb);
if (nlh->nlmsg_len < sizeof(*nlh) + sizeof(*ev) ||
skb->len < nlh->nlmsg_len) {
break;
}
...
err = iscsi_if_recv_msg(skb, nlh, &group);
Hence, in iscsi_if_recv_msg() the nlmsg_data can be safely converted to
iscsi_uevent as the length is already checked.
However, in other cases the length of nlattr payload is not checked before
the payload is converted to other data structures. One example is
iscsi_set_path() which converts the payload to type iscsi_path without any
checks:
params = (struct iscsi_path *)((char *)ev + sizeof(*ev));
Whereas iscsi_if_transport_conn() correctly checks the pdu_len:
pdu_len = nlh->nlmsg_len - sizeof(*nlh) - sizeof(*ev);
if ((ev->u.send_pdu.hdr_size > pdu_len) ..
err = -EINVAL;
To sum up, some code paths called in iscsi_if_recv_msg() do not check the
length of the data (see below picture) and directly convert the data to
another data structure. This could result in an out-of-bound reads and heap
dirty data leakage.
_________ nlmsg_len(nlh) _______________
/ \
+----------+--------------+---------------------------+
| nlmsghdr | iscsi_uevent | data |
+----------+--------------+---------------------------+
\ /
iscsi_uevent->u.set_param.len
Fix the issue by adding the length check before accessing it. To clean up
the code, an additional parameter named rlen is added. The rlen is
calculated at the beginning of iscsi_if_recv_msg() which avoids duplicated
calculation.
Fixes: ac20c7bf07 ("[SCSI] iscsi_transport: Added Ping support")
Fixes: 43514774ff ("[SCSI] iscsi class: Add new NETLINK_ISCSI messages for cnic/bnx2i driver.")
Fixes: 1d9bf13a9c ("[SCSI] iscsi class: add iscsi host set param event")
Fixes: 01cb225dad ("[SCSI] iscsi: add target discvery event to transport class")
Fixes: 264faaaa12 ("[SCSI] iscsi: add transport end point callbacks")
Fixes: fd7255f51a ("[SCSI] iscsi: add sysfs attrs for uspace sync up")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20230725024529.428311-1-linma@zju.edu.cn
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c26a2d7c98039e913e63f9250fde738a3f88a60 ]
There are two iscsi_set_param() functions defined in libiscsi.c and
scsi_transport_iscsi.c respectively which is confusing.
Rename the one in scsi_transport_iscsi.c to iscsi_if_set_param().
Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
Link: https://lore.kernel.org/r/20221122181105.4123935-1-haowenchao@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 971dfcb74a80 ("scsi: iscsi: Add length check for nlattr payload")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89e637c19b2441aabc8dbf22a8745b932fd6996e ]
Although the code for residual handling in the SRP initiator follows the
SCSI documentation, that documentation has never been correct. Because
scsi_finish_command() starts from the data buffer length and subtracts the
residual, scsi_set_resid() must not be called if a residual overflow
occurs. Hence remove the scsi_set_resid() calls from the SRP initiator if a
residual overflow occurrs.
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Fixes: 9237f04e12 ("scsi: core: Fix scsi_get/set_resid() interface")
Fixes: e714531a34 ("IB/srp: Fix residual handling")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230724200843.3376570-3-bvanassche@acm.org
Acked-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5eda42aebb7668b4dcff025cd3ccb0d3d7c53da6 ]
The function mxs_phy_is_otg_host() will return true if OTG_ID_VALUE is
0 at USBPHY_CTRL register. However, OTG_ID_VALUE will not reflect the real
state if the ID pin is float, such as Host-only or Type-C cases. The value
of OTG_ID_VALUE is always 1 which means device mode.
This patch will fix the issue by judging the current mode based on
last_event. The controller will update last_event in time.
Fixes: 7b09e67639 ("usb: phy: mxs: refine mxs_phy_disconnect_line")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20230627110353.1879477-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf10b0bb503c974ba049d6f888b21178be20a962 ]
If we encounter any error in the vdec_msg_queue_init() then we need
to set "msg_queue->wdma_addr.size = 0;". Normally, this is done
inside the vdec_msg_queue_deinit() function. However, if the
first call to allocate &msg_queue->wdma_addr fails, then the
vdec_msg_queue_deinit() function is a no-op. For that situation, just
set the size to zero explicitly and return.
There were two other error paths which did not clean up before returning.
Change those error paths to goto mem_alloc_err.
Fixes: b199fe46f3 ("media: mtk-vcodec: Add msg queue feature for lat and core architecture")
Fixes: 2f5d0aef37c6 ("media: mediatek: vcodec: support stateless AV1 decoder")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be40f524b6edac4fb9a98ef79620fd9b9497a998 ]
The "lat_buf->private_data" needs to be set to NULL to prevent a
double free. How this would happen is if vdec_msg_queue_init() failed
twice in a row and on the second time it failed earlier than on the
first time.
The vdec_msg_queue_init() function has a loop which does:
for (i = 0; i < NUM_BUFFER_COUNT; i++) {
Each iteration initializes one element in the msg_queue->lat_buf[] array
and then the clean up function vdec_msg_queue_deinit() frees each
element of the msg_queue->lat_buf[] array. This clean up code relies
on the assumption that every element is either initialized or zeroed.
Leaving a freed pointer which is non-zero breaks the assumption.
Fixes: b199fe46f3 ("media: mtk-vcodec: Add msg queue feature for lat and core architecture")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dfa2d6e07432270330ae191f50a0e70636a4cd2b ]
"fb_use_list" is used to store used or referenced frame buffers for
vp9 stateful decoder. "NULL" should be returned when getting target
frame buffer failed from "fb_use_list", not a random unexpected one.
Fixes: f77e89854b ("[media] vcodec: mediatek: Add Mediatek VP9 Video Decoder Driver")
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5bd28eae48589694ff4e5badb03bf75dae695b3f ]
the supported_instance_count determine the instance index range,
it shouldn't exceed the bits number of instance_mask,
otherwise the bitops of instance_mask may cross boundaries
Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf6a06354989c41b536be8e094561ee16223cf1f ]
assign value '-EINVAL' to ret, but the stored value is overwritten
before it can be used
Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79d3bafaecc13bccab1ebbd28a15e669c5a4cdaf ]
null-checking of a pointor is suggested before dereferencing it
Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f000e6ca2d60fefd02a180a57df2c4162fa0c1b7 ]
After testing it is possible for the hardware to decode H264
bistream with a height up to 2560.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Fixes: cd33c83044 ("media: rkvdec: Add the rkvdec driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c677d7ae83141d390d1253abebafa49c962afb52 ]
In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with
mtk_jpeg_job_timeout_work. Then mtk_jpeg_dec_device_run
and mtk_jpeg_enc_device_run may be called to start the
work.
If we remove the module which will call mtk_jpeg_remove
to make cleanup, there may be a unfinished work. The
possible sequence is as follows, which will cause a
typical UAF bug.
Fix it by canceling the work before cleanup in the mtk_jpeg_remove
CPU0 CPU1
|mtk_jpeg_job_timeout_work
mtk_jpeg_remove |
v4l2_m2m_release |
kfree(m2m_dev); |
|
| v4l2_m2m_get_curr_priv
| m2m_dev->curr_ctx //use
Fixes: b2f0d2724b ("[media] vcodec: mediatek: Add Mediatek JPEG Decoder Driver")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73e3f09292a0492a3fe0f87a8170a74f12624c5e ]
according to v4l2 stateful decoder document 4.5.1.3. State Machine,
the state should change from seek to initialization
if call VIDIOC_REQBUFS(OUTPUT, 0).
so reinit the vpu decoder if reqbufs output 0
Fixes: 6de8d628df ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5393a5602cacfda2014e0ff8220e5a7564e7cd1 ]
The PIO read command has no response frame and the struct iu[1024] won't be
filled. I/Os which are normally completed will be treated as failed in
sas_ata_task_done() when iu contains abnormal dirty data.
Consequently ending_fis should not be filled by iu when the response frame
hasn't been written to memory.
Fixes: d380f55503 ("scsi: hisi_sas: Don't bother clearing status buffer IU in task prep")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1689045300-44318-2-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bad5b6e34ffbaacc77ad28a0f482e33b3929e635 ]
LOOPBACK and NONE (tunnel) devices have all-zero MAC addresses.
Currently, siw_device_create() falls back to copying the IB device's
name in those cases, because an all-zero MAC address breaks the RDMA
core address resolution mechanism.
However, at the point when siw_device_create() constructs a GID, the
ib_device::name field is uninitialized, leaving the MAC address to
remain in an all-zero state.
Fabricate a random artificial GID for such devices, and ensure this
artificial GID is returned for all device query operations.
Link: https://lore.kernel.org/r/168960673260.3007.12378736853793339110.stgit@manet.1015granger.net
Reported-by: Tom Talpey <tom@talpey.com>
Fixes: a2d36b02c1 ("RDMA/siw: Enable siw on tunnel devices")
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96002c0ac824e1773d3f706b1f92e2a9f2988047 ]
If cx24120_message_send() returns error, we should keep local struct
unchanged.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 5afc9a25be ("[media] Add support for TechniSat Skystar S2")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea9ef6c2e001c5dc94bee35ebd1c8a98621cf7b8 ]
'read' is freed when it is known to be NULL, but not when a read error
occurs.
Revert the logic to avoid a small leak, should a m920x_read() call fail.
Fixes: a2ab06d7c4 ("media: m920x: don't use stack on USB reads")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1db7b2c5533fc67e2681eb5efc921a67bc7d5b8 ]
Variable loopdiv can be assigned 0, then it is used as a denominator,
without checking it for 0.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 713d54a8bd ("[media] DiB7090: add support for the dib7090 based")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: (bw != NULL) -> bw]
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9c7141f384097fa4fa67d2f72e5731d628aef7c ]
The previous commit 4b208f8b56 ("[media] siano: register media controller
earlier")moves siano_media_device_register before smscore_register_device,
and adds corresponding error handling code if smscore_register_device
fails. However, it misses the following error handling code of
smsusb_init_device.
Fix this by moving error handling code at the end of smsusb_init_device
and adding a goto statement in the following error handling parts.
Fixes: 4b208f8b56 ("[media] siano: register media controller earlier")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6df63b7ebdaf5fcd75dceedf6967d0761e56eca1 ]
The physical address to the directory table is currently encoded using
the following bit layout for IOMMU v2.
31:12 - Address bit 31:0
11: 4 - Address bit 39:32
This is also the bit layout used by the vendor kernel.
However, testing has shown that addresses to the directory/page tables
and memory pages are all encoded using the same bit layout.
IOMMU v1:
31:12 - Address bit 31:0
IOMMU v2:
31:12 - Address bit 31:0
11: 8 - Address bit 35:32
7: 4 - Address bit 39:36
Change to use the mk_dtentries ops to encode the directory table address
correctly. The value written to DTE_ADDR may include the valid bit set,
a bit that is ignored and DTE_ADDR reg read it back as 0.
This also update the bit layout comment for the page address and the
number of nybbles that are read back for DTE_ADDR comment.
These changes render the dte_addr_phys and dma_addr_dte ops unused and
is removed.
Fixes: 227014b33f ("iommu: rockchip: Add internal ops to handle variants")
Fixes: c55356c534 ("iommu: rockchip: Add support for iommu v2")
Fixes: c987b65a57 ("iommu/rockchip: Fix physical address decoding")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20230617182540.3091374-2-jonas@kwiboo.se
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 534103bcd52ca9c1fecbc70e717b4a538dc4ded8 ]
When unbinding pasid - a race condition exists vs outstanding page faults.
To prevent this, the pasid_state object contains a refcount.
* set to 1 on pasid bind
* incremented on each ppr notification start
* decremented on each ppr notification done
* decremented on pasid unbind
Since refcount_dec assumes that refcount will never reach 0:
the current implementation causes the following to be invoked on
pasid unbind:
REFCOUNT_WARN("decrement hit 0; leaking memory")
Fix this issue by changing refcount_dec to refcount_dec_and_test
to explicitly handle refcount=1.
Fixes: 8bc54824da ("iommu/amd: Convert from atomic_t to refcount_t on pasid_state->count")
Signed-off-by: Daniel Marcovitch <dmarcovitch@nvidia.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230609105146.7773-2-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7b13edd4cb4bfa335b6008ab867ac28582d3e5c ]
If fwnode_graph_get_remote_endpoint() fails, 'fwnode' is known to be NULL,
so fwnode_handle_put() is a no-op.
Release the reference taken from a previous fwnode_graph_get_port_parent()
call instead.
Also handle fwnode_graph_get_port_parent() failures.
In order to fix these issues, add an error handling path to the function
and the needed gotos.
Fixes: ca50c197bd ("[media] v4l: fwnode: Support generic fwnode for parsing standardised properties")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f126ff7e4024f6704e6ec0d4137037568708a3c7 ]
The supported ad5820 and ad5821 VCMs both use a single 16 bit register
which is written by sending 2 bytes with the data directly after sending
the i2c-client address.
The ad5823 OTOH has a more typical i2c / smbus device setup with multiple
8 bit registers where the first byte send after the i2c-client address is
the register address and the actual data only starts from the second byte
after the i2c-client address.
The ad5823 i2c_ and of_device_id-s was added at the same time as
the ad5821 ids with as rationale:
"""
Some camera modules also refer that AD5823 is a replacement of AD5820:
https://download.kamami.com/p564094-OV8865_DS.pdf
"""
The AD5823 may be an electrical and functional replacement of the AD5820,
but from a software pov it is not compatible at all and it is going to
need its own driver, drop its id from the ad5820 driver.
Fixes: b8bf73136b ("media: ad5820: Add support for ad5821 and ad5823")
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ricardo Ribalda Delgado <ribalda@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a828002f38c5ee49d3f0c0e64c0f0caa1aec8dc2 ]
OV5640 will output abnormal image data when work at low resolution
(320x240, 176x144 and 160x120) after switching from high resolution,
such as 1080P, the time interval between high and low switching must
be less than 1000ms in order to OV5640 don't enter suspend state during
the time.
The reason is by 0x3824 value don't restore to initialize value when
do resolution switching. In high resolution setting array, 0x3824 is
set to 0x04, but low resolution setting array remove 0x3824 in commit
db15c1957a ("media: ov5640: Remove duplicated mode settings"). So
when do resolution switching from high to low, such as 1080P to 320x240,
and the time interval is less than auto suspend delay time which means
global initialize setting array will not be loaded, the output image
data are abnormal. Hence move 0x3824 from ov5640_init_setting[] table
to ov5640_setting_low_res[] table and also move 0x4407 0x460b, 0x460c
to avoid same issue.
Fixes: db15c1957a ("media: ov5640: Remove duplicated mode settings")
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
