[ Upstream commit da37dddcf4caf015c400a930301d2ee27a7a15fb ]
When IOMMU hardware operates in legacy mode, the TT field of the context
entry determines the translation type, with three supported types (Section
9.3 Context Entry):
- DMA translation without device TLB support
- DMA translation with device TLB support
- Passthrough mode with translated and translation requests blocked
Device TLB support is absent when hardware is configured in passthrough
mode.
Disable the PCI ATS feature when IOMMU is configured for passthrough
translation type in legacy (non-scalable) mode.
Fixes: 0faa19a151 ("iommu/vt-d: Decouple PASID & PRI enabling from SVA")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20231114011036.70142-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7be17c2903d4acbf9aa372bfb6e2a418387fce0 ]
If domain attaching to device fails, the IOMMU driver should bring the
device to blocking DMA state. The upper layer is expected to recover it
by attaching a new domain. Use device_block_translation() in the error
path of dev_attach to make the behavior specific.
The difference between device_block_translation() and the previous
dmar_remove_one_dev_info() is that, in the scalable mode, it is the
RID2PASID entry instead of context entry being cleared. As a result,
enabling PCI capabilities is moved up.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20221118132451.114406-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: da37dddcf4ca ("iommu/vt-d: Disable PCI ATS in legacy passthrough mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec62b4424174f41bdcedd08d12d7bed80088453d ]
Whether or not a domain is attached to the device, the pasid table should
always be valid as long as it has been probed. This moves the pasid table
allocation from the domain attaching device path to device probe path and
frees it in the device release path.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20221118132451.114406-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: da37dddcf4ca ("iommu/vt-d: Disable PCI ATS in legacy passthrough mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f5432a9b839847dcfe9fa369d72e3d646102ddf ]
The latest VT-d spec indicates that when remapping hardware is disabled
(TES=0 in Global Status Register), upstream ATS Invalidation Completion
requests are treated as UR (Unsupported Request).
Consequently, the spec recommends in section 4.3 Handling of Device-TLB
Invalidations that software refrain from submitting any Device-TLB
invalidation requests when address remapping hardware is disabled.
Verify address remapping hardware is enabled prior to submitting Device-
TLB invalidation requests.
Fixes: 792fb43ce2 ("iommu/vt-d: Enable Intel IOMMU scalable mode by default")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20231114011036.70142-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e4e0984c7d696cc74cf2fd7e7f62997f0e9ebe6 ]
For a 900MHz i.MX6ULL CPU the 792MHz OPP is disabled. There is no
convincing reason to disable this OPP. If a CPU can run at 900MHz,
it should also be able to cope with 792MHz. Looking at the voltage
level of 792MHz in [1] (page 24, table 10. "Operating Ranges") the
current defined OPP is above the minimum. So the voltage level
shouldn't be a problem. However in [2] (page 24, table 10.
"Operating Ranges"), it is not mentioned that 792MHz OPP isn't
allowed. Change it to only disable 792MHz OPP for i.MX6ULL types
below 792 MHz.
[1] https://www.nxp.com/docs/en/data-sheet/IMX6ULLIEC.pdf
[2] https://www.nxp.com/docs/en/data-sheet/IMX6ULLCEC.pdf
Fixes: 0aa9abd4c2 ("cpufreq: imx6q: check speed grades for i.MX6ULL")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
[ Viresh: Edited subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11a3b0ac33d95aa84be426e801f800997262a225 ]
It is confusing if a warning is given for disabling a non-existent
frequency of the operating performance points (OPP). In this case
the function dev_pm_opp_disable() returns -ENODEV. Check the return
value and avoid the output of a warning in this case. Avoid code
duplication by using a separate function.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
[ Viresh : Updated commit subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Stable-dep-of: 2e4e0984c7d6 ("cpufreq: imx6q: Don't disable 792 Mhz OPP unnecessarily")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ffa8602e39b89469dc703ebab7a7e44c33da0f7 ]
[WHY]
HW can return invalid values on register read, guard against these being
set and causing us to access memory out of range and page fault.
[HOW]
Guard at sync_inbox1 and guard at pushing commands.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f3589bb6fcea397775398cba4fbcc46829a60ed ]
[Why]
States may be desync after resume.
[How]
Sync sw state with hw state.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 1ffa8602e39b ("drm/amd/display: Guard against invalid RPTR/WPTR being set")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bef4a48f4ef798c4feddf045d49e53c8a97d5e37 ]
A race condition exists where a synchronous (noqueue) transfer can be
active during a system suspend. This can cause a null pointer
dereference exception to occur when the system resumes.
Example order of events leading to the exception:
1. spi_sync() calls __spi_transfer_message_noqueue() which sets
ctlr->cur_msg
2. Spi transfer begins via spi_transfer_one_message()
3. System is suspended interrupting the transfer context
4. System is resumed
6. spi_controller_resume() calls spi_start_queue() which resets cur_msg
to NULL
7. Spi transfer context resumes and spi_finalize_current_message() is
called which dereferences cur_msg (which is now NULL)
Wait for synchronous transfers to complete before suspending by
acquiring the bus mutex and setting/checking a suspend flag.
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Link: https://lore.kernel.org/r/20231107144743.v1.1.I7987f05f61901f567f7661763646cb7d7919b528@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a32aa17c1cd48df1ddaa78e45abcb8c7a2220d6 ]
The pointer to the next STI font is actually a signed 32-bit
offset. With this change the 64-bit kernel will correctly subract
the (signed 32-bit) offset instead of adding a (unsigned 32-bit)
offset. It has no effect on 32-bit kernels.
This fixes the stifb driver with a 64-bit kernel on qemu.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a07d2497ed657eb2efeb967af47e22f573dcd1d6 ]
The DWC core driver exposes the write_dbi2() callback for writing to the
DBI2 registers in a vendor-specific way.
On the Qcom EP platforms, the DBI_CS2 bit in the ELBI region needs to be
asserted before writing to any DBI2 registers and deasserted once done.
So, let's implement the callback for the Qcom PCIe EP driver so that the
DBI2 writes are correctly handled in the hardware.
Without this callback, the DBI2 register writes like BAR size won't go
through and as a result, the default BAR size is set for all BARs.
[kwilczynski: commit log, renamed function to match the DWC convention]
Fixes: f55fee56a6 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver")
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/linux-pci/20231025130029.74693-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Cc: stable@vger.kernel.org # 5.16+
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9260693aa0c1e029ed23693cfd4d7814eee6624 ]
Commit ac91e6980563 ("PCI: Unify delay handling for reset and resume")
shortened an unconditional 1 sec delay after a Secondary Bus Reset to 100
msec for PCIe (per PCIe r6.1 sec 6.6.1). The 1 sec delay is only required
for Conventional PCI.
But it turns out that there are PCIe devices which require a longer delay
than prescribed before first config space access after reset recovery or
resume from D3cold:
Chad reports that a "VideoPropulsion Torrent QN16e" MPEG QAM Modulator
"raises a PCI system error (PERR), as reported by the IPMI event log, and
the hardware itself would suffer a catastrophic event, cycling the server"
unless the longer delay is observed.
The card is specified to conform to PCIe r1.0 and indeed only supports Gen1
speed (2.5 GT/s) according to lspci. PCIe r1.0 sec 7.6 prescribes the same
100 msec delay as PCIe r6.1 sec 6.6.1:
To allow components to perform internal initialization, system software
must wait for at least 100 ms from the end of a reset (cold/warm/hot)
before it is permitted to issue Configuration Requests
The behavior of the Torrent QN16e card thus appears to be a quirk. Treat
it as such and lengthen the reset delay for this specific device.
Fixes: ac91e6980563 ("PCI: Unify delay handling for reset and resume")
Link: https://lore.kernel.org/r/47727e792c7f0282dc144e3ec8ce8eb6e713394e.1695304512.git.lukas@wunner.de
Reported-by: Chad Schroeder <CSchroeder@sonifi.com>
Closes: https://lore.kernel.org/linux-pci/DM6PR16MB2844903E34CAB910082DF019B1FAA@DM6PR16MB2844.namprd16.prod.outlook.com/
Tested-by: Chad Schroeder <CSchroeder@sonifi.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cfec6d097c607e36199cf0cfbb8cf5acbd8e9b2 ]
When running android emulator (which is based on QEMU 2.12) on
certain Intel hosts with kernel version 6.3-rc1 or above, guest
will freeze after loading a snapshot. This is almost 100%
reproducible. By default, the android emulator will use snapshot
to speed up the next launching of the same android guest. So
this breaks the android emulator badly.
I tested QEMU 8.0.4 from Debian 12 with an Ubuntu 22.04 guest by
running command "loadvm" after "savevm". The same issue is
observed. At the same time, none of our AMD platforms is impacted.
More experiments show that loading the KVM module with
"enable_apicv=false" can workaround it.
The issue started to show up after commit 8e6ed96cdd50 ("KVM: x86:
fire timer when it is migrated and expired, and in oneshot mode").
However, as is pointed out by Sean Christopherson, it is introduced
by commit 967235d320 ("KVM: vmx: clear pending interrupts on
KVM_SET_LAPIC"). commit 8e6ed96cdd50 ("KVM: x86: fire timer when
it is migrated and expired, and in oneshot mode") just makes it
easier to hit the issue.
Having both commits, the oneshot lapic timer gets fired immediately
inside the KVM_SET_LAPIC call when loading the snapshot. On Intel
platforms with APIC virtualization and posted interrupt processing,
this eventually leads to setting the corresponding PIR bit. However,
the whole PIR bits get cleared later in the same KVM_SET_LAPIC call
by apicv_post_state_restore. This leads to timer interrupt lost.
The fix is to move vmx_apicv_post_state_restore to the beginning of
the KVM_SET_LAPIC call and rename to vmx_apicv_pre_state_restore.
What vmx_apicv_post_state_restore does is actually clearing any
former apicv state and this behavior is more suitable to carry out
in the beginning.
Fixes: 967235d320 ("KVM: vmx: clear pending interrupts on KVM_SET_LAPIC")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Haitao Shan <hshan@google.com>
Link: https://lore.kernel.org/r/20230913000215.478387-1-hshan@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edf9bc396e05081ca281ffb0cd41e44db478ff26 ]
On RZ/G3S SMARC Carrier II board having RGMII connections b/w Ethernet
MACs and PHYs it has been discovered that doing unbind/bind for ravb
driver in a loop leads to wrong speed and duplex for Ethernet links and
broken connectivity (the connectivity cannot be restored even with
bringing interface down/up). Before doing unbind/bind the Ethernet
interfaces were configured though systemd. The sh instructions used to
do unbind/bind were:
$ cd /sys/bus/platform/drivers/ravb/
$ while :; do echo 11c30000.ethernet > unbind ; \
echo 11c30000.ethernet > bind; done
It has been discovered that there is a race b/w IOCTLs initialized by
systemd at the response of success binding and the
"ravb_write(ndev, CCC_OPC_RESET, CCC)" call in ravb_remove() as
follows:
1/ as a result of bind success the user space open/configures the
interfaces tough an IOCTL; the following stack trace has been
identified on RZ/G3S:
Call trace:
dump_backtrace+0x9c/0x100
show_stack+0x20/0x38
dump_stack_lvl+0x48/0x60
dump_stack+0x18/0x28
ravb_open+0x70/0xa58
__dev_open+0xf4/0x1e8
__dev_change_flags+0x198/0x218
dev_change_flags+0x2c/0x80
devinet_ioctl+0x640/0x708
inet_ioctl+0x1e4/0x200
sock_do_ioctl+0x50/0x108
sock_ioctl+0x240/0x358
__arm64_sys_ioctl+0xb0/0x100
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x34/0xb8
el0t_64_sync_handler+0xc0/0xc8
el0t_64_sync+0x190/0x198
2/ this call may execute concurrently with ravb_remove() as the
unbind/bind operation was executed in a loop
3/ if the operation mode is changed to RESET (through
ravb_write(ndev, CCC_OPC_RESET, CCC) call in ravb_remove())
while the above ravb_open() is in progress it may lead to MAC
(or PHY, or MAC-PHY connection, the right point hasn't been identified
at the moment) to be broken, thus the Ethernet connectivity fails to
restore.
The simple fix for this is to move ravb_write(ndev, CCC_OPC_RESET, CCC))
after unregister_netdev() to avoid resetting the controller while the
netdev interface is still registered.
To avoid future issues in ravb_remove(), the patch follows the proper order
of operations in ravb_remove(): reverse order compared with ravb_probe().
This avoids described races as the IOCTLs as well as unregister_netdev()
(called now at the beginning of ravb_remove()) calls rtnl_lock() before
continuing and IOCTLs check (though devinet_ioctl()) if device is still
registered just after taking the lock:
int devinet_ioctl(struct net *net, unsigned int cmd, struct ifreq *ifr)
{
// ...
rtnl_lock();
ret = -ENODEV;
dev = __dev_get_by_name(net, ifr->ifr_name);
if (!dev)
goto done;
// ...
done:
rtnl_unlock();
out:
return ret;
}
Fixes: c156633f13 ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eac16a733427ba0de2449ffc7bd3da32ddb65cb7 ]
In case ravb_phy_start() returns with error the settings applied in
ravb_dmac_init() are not reverted (e.g. config mode). For this call
ravb_stop_dma() on failure path of ravb_open().
Fixes: a0d2f20650 ("Renesas Ethernet AVB PTP clock driver")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d78c0ced60d5e2f8b5a4a0468a5c400b24aeadf2 ]
Hardware manual of RZ/G3S (and RZ/G2L) specifies the following on the
description of CXR35 register (chapter "PHY interface select register
(CXR35)"): "After release reset, make write-access to this register before
making write-access to other registers (except MDIOMOD). Even if not need
to change the value of this register, make write-access to this register
at least one time. Because RGMII/MII MODE is recognized by accessing this
register".
The setup procedure for EMAC module (chapter "Setup procedure" of RZ/G3S,
RZ/G2L manuals) specifies the E-MAC.CXR35 register is the first EMAC
register that is to be configured.
Note [A] from chapter "PHY interface select register (CXR35)" specifies
the following:
[A] The case which CXR35 SEL_XMII is used for the selection of RGMII/MII
in APB Clock 100 MHz.
(1) To use RGMII interface, Set ‘H’03E8_0000’ to this register.
(2) To use MII interface, Set ‘H’03E8_0002’ to this register.
Take into account these indication.
Fixes: 1089877ada ("ravb: Add RZ/G2L MII interface support")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88b74831faaee455c2af380382d979fc38e79270 ]
pm_runtime_get_sync() may return an error. In case it returns with an error
dev->power.usage_count needs to be decremented. pm_runtime_resume_and_get()
takes care of this. Thus use it.
Fixes: c156633f13 ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8eb6ea4b302e7ff78535c205510e359ac10a0bd ]
reset_control_deassert() could return an error. Some devices cannot work
if reset signal de-assert operation fails. To avoid this check the return
code of reset_control_deassert() in ravb_probe() and take proper action.
Along with it, the free_netdev() call from the error path was moved after
reset_control_assert() on its own label (out_free_netdev) to free
netdev in case reset_control_deassert() fails.
Fixes: 0d13a1a464 ("ravb: Add reset support")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9870257a0a338cd8d6c1cddab74e703f490f6779 ]
Fix races between ravb_tx_timeout_work() and functions of net_device_ops
and ethtool_ops by using rtnl_trylock() and rtnl_unlock(). Note that
since ravb_close() is under the rtnl lock and calls cancel_work_sync(),
ravb_tx_timeout_work() should calls rtnl_trylock(). Otherwise, a deadlock
may happen in ravb_tx_timeout_work() like below:
CPU0 CPU1
ravb_tx_timeout()
schedule_work()
...
__dev_close_many()
// Under rtnl lock
ravb_close()
cancel_work_sync()
// Waiting
ravb_tx_timeout_work()
rtnl_lock()
// This is possible to cause a deadlock
If rtnl_trylock() fails, rescheduling the work with sleep for 1 msec.
Fixes: c156633f13 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20231127122420.3706751-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91d3d149978ba7b238198dd80e4b823756aa7cfa ]
ndo_stop() is RTNL-protected by net core, and the worker function takes
RTNL as well. Therefore we will deadlock when trying to execute a
pending work synchronously. To fix this execute any pending work
asynchronously. This will do no harm because netif_running() is false
in ndo_stop(), and therefore the work function is effectively a no-op.
However we have to ensure that no task is running or pending after
rtl_remove_one(), therefore add a call to cancel_work_sync().
Fixes: abe5fc42f9 ("r8169: use RTNL to protect critical sections")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/12395867-1d17-4cac-aa7d-c691938fcddf@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd7f98b2e12a3d96a92bde6640657ec7116f4372 ]
TC ingress policer rules depends on interface receive queue
contexts since the bandwidth profiles are attached to RQ
contexts. When an interface is brought down all the queue
contexts are freed. This in turn frees bandwidth profiles in
hardware causing ingress police rules non-functional after
the interface is brought up. Fix this by applying all the ingress
police rules config to hardware in otx2_open. Also allow
adding ingress rules only when interface is running
since no contexts exist for the interface when it is down.
Fixes: 68fbff68db ("octeontx2-pf: Add police action for TC flower")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/1700930217-5707-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec87f05402f592d27507e1aa6b2fd21c486f2cc0 ]
As of today, hardware does not support installing tc filter
rules based on priority. This patch adds support to install
the hardware rules based on priority. The final hardware rules
will not be dependent on rule installation order, it will be strictly
priority based, same as software.
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721043925.2627806-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: fd7f98b2e12a ("octeontx2-pf: Restore TC ingress police rules when interface is up")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51597219e0cd5157401d4d0ccb5daa4d9961676f ]
When more than 64 VFs are enabled for a PF then mbox communication
between VF and PF is not working as mbox work queueing for few VFs
are skipped due to wrong calculation of VF numbers.
Fixes: d424b6c024 ("octeontx2-pf: Enable SRIOV and added VF mbox handling")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/1700930042-5400-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e54d628a2721bfbb002c19f6e8ca6746cec7640f ]
Commit aeb18dd076 ("net: stmmac: xgmac: Disable MMC interrupts
by default") tries to disable MMC interrupts to avoid a storm of
unhandled interrupts, but leaves the FPE(Frame Preemption) MMC
interrupts enabled, FPE MMC interrupts can cause the same problem.
Now we mask FPE TX and RX interrupts to disable all MMC interrupts.
Fixes: aeb18dd076 ("net: stmmac: xgmac: Disable MMC interrupts by default")
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://lore.kernel.org/r/20231125060126.2328690-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad31c629ca3c87f6d557488c1f9faaebfbcd203c ]
A loop in rvu_mbox_handler_nix_bandprof_free() contains
a break if (idx == MAX_BANDPROF_PER_PFFUNC),
but if idx may reach MAX_BANDPROF_PER_PFFUNC
buffer '(*req->prof_idx)[layer]' overflow happens before that check.
The patch moves the break to the
beginning of the loop.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e8e095b3b3 ("octeontx2-af: cn10k: Bandwidth profiles config support").
Signed-off-by: Elena Salomatkina <elena.salomatkina.cmc@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20231124210802.109763-1-elena.salomatkina.cmc@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00a4f8fd9c750f20d8fd4535c71c9caa7ef5ff2f ]
Same init_rng() in both tests. The function reads /dev/urandom to
initialize srand(). In case of failure, it falls back onto the
entropy in the uninitialized variable. Not sure if this is on purpose.
But failure reading urandom should be rare, so just fail hard. While
at it, convert to getrandom(). Which man 4 random suggests is simpler
and more robust.
mptcp_inq.c:525:6:
mptcp_connect.c:1131:6:
error: variable 'foo' is used uninitialized
whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
Fixes: 048d19d444 ("mptcp: add basic kselftest for mptcp")
Fixes: b51880568f ("selftests: mptcp: add inq test case")
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Willem de Bruijn <willemb@google.com>
----
When input is randomized because this is expected to meaningfully
explore edge cases, should we also add
1. logging the random seed to stdout and
2. adding a command line argument to replay from a specific seed
I can do this in net-next, if authors find it useful in this case.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231124171645.1011043-5-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b29828c5af6841bdeb9fafa32fdfeff7ab9c407 ]
Signedness of char is signed on x86_64, but unsigned on arm64.
Fix the warning building cmsg_sender.c on signed platforms or
forced with -fsigned-char:
msg_sender.c:455:12:
error: implicit conversion from 'int' to 'char'
changes value from 128 to -128
[-Werror,-Wconstant-conversion]
buf[0] = ICMPV6_ECHO_REQUEST;
constant ICMPV6_ECHO_REQUEST is 128.
Link: https://lwn.net/Articles/911914
Fixes: de17e305a8 ("selftests: net: cmsg_sender: support icmp and raw sockets")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231124171645.1011043-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 088559815477c6f623a5db5993491ddd7facbec7 ]
Fix a small compiler warning.
nr_process must be a signed long: it is assigned a signed long by
strtol() and is compared against LONG_MIN and LONG_MAX.
ipsec.c:2280:65:
error: result of comparison of constant -9223372036854775808
with expression of type 'unsigned int' is always false
[-Werror,-Wtautological-constant-out-of-range-compare]
if ((errno == ERANGE && (nr_process == LONG_MAX || nr_process == LONG_MIN))
Fixes: bc2652b7ae ("selftest/net/xfrm: Add test for ipsec tunnel")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/20231124171645.1011043-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e86f32a13af1970d21be94f659cae56bbe487ee ]
Recently the kernel test robot has reported an ARM-specific BUILD_BUG_ON()
in an old and unmaintained wil6210 wireless driver. The problem comes from
the structure packing rules of old ARM ABI ('-mabi=apcs-gnu'). For example,
the following structure is packed to 18 bytes instead of 16:
struct poorly_packed {
unsigned int a;
unsigned int b;
unsigned short c;
union {
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed));
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed)) inner;
};
} __attribute__((packed));
To fit it into 16 bytes, it's required to add packed attribute to the
container union as well:
struct poorly_packed {
unsigned int a;
unsigned int b;
unsigned short c;
union {
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed));
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed)) inner;
} __attribute__((packed));
} __attribute__((packed));
Thanks to Andrew Pinski of GCC team for sorting the things out at
https://gcc.gnu.org/pipermail/gcc/2023-November/242888.html.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311150821.cI4yciFE-lkp@intel.com
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20231120110607.98956-1-dmantipov@yandex.ru
Fixes: 50d7bd38c3 ("stddef: Introduce struct_group() helper macro")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f422abe3f23d483cf01f386819f26fb3fe0dbb2b ]
Increase the needed headroom to account for a 64 byte alignment
restriction which, with this patch, we make mandatory on the Tx path.
The case in which the amount of headroom needed is not available is
already handled by the driver which instead sends a S/G frame with the
first buffer only holding the SW and HW annotation areas.
Without this patch, we can empirically see data corruption happening
between Tx and Tx confirmation which sometimes leads to the SW
annotation area being overwritten.
Since this is an old IP where the hardware team cannot help to
understand the underlying behavior, we make the Tx alignment mandatory
for all frames to avoid the crash on Tx conf. Also, remove the comment
that suggested that this is just an optimization.
This patch also sets the needed_headroom net device field to the usual
value that the driver would need on the Tx path:
- 64 bytes for the software annotation area
- 64 bytes to account for a 64 byte aligned buffer address
Fixes: 6e2387e8f1 ("staging: fsl-dpaa2/eth: Add Freescale DPAA2 Ethernet driver")
Closes: https://lore.kernel.org/netdev/aa784d0c-85eb-4e5d-968b-c8f74fa86be6@gin.de/
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 974bba5c118f4c2baf00de0356e3e4f7928b4cbc ]
The BOS descriptor defines a root descriptor and is the base descriptor for
accessing a family of related descriptors.
Function 'usb_get_bos_descriptor()' encounters an iteration issue when
skipping the 'USB_DT_DEVICE_CAPABILITY' descriptor type. This results in
the same descriptor being read repeatedly.
To address this issue, a 'goto' statement is introduced to ensure that the
pointer and the amount read is updated correctly. This ensures that the
function iterates to the next descriptor instead of reading the same
descriptor repeatedly.
Cc: stable@vger.kernel.org
Fixes: 3dd550a2d3 ("USB: usbcore: Fix slab-out-of-bounds bug during device reset")
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231115121325.471454-1-niklas.neronin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a09c1269702db8eccb6f718da2b00173e1e0034 ]
It has been pointed out that the kernel log messages warning about
problems in USB configuration and related descriptors are vexing for
users. The warning log level has a fairly high priority, but the user
can do nothing to fix the underlying errors in the device's firmware.
To reduce the amount of useless information produced by tools that
filter high-priority log messages, we can change these warnings to
notices, i.e., change dev_warn() to dev_notice(). The same holds for
a few messages that currently use dev_err(): Unless they indicate a
failure that might make a device unusable (such as inability to
transfer a config descriptor), change them to dev_notice() also.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216630
Suggested-by: Artem S. Tashkinov <aros@gmx.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/Y2KzPx0h6z1jXCuN@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 974bba5c118f ("usb: config: fix iteration issue in 'usb_get_bos_descriptor()'")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16b7e0cccb243033de4406ffb4d892365041a1e7 ]
Commits 7b8ef22ea5 ("usb: xhci: plat: Add USB phy support") and
9134c1fd0503 ("usb: xhci: plat: Add USB 3.0 phy support") added support
for looking up legacy PHYs from the sysdev devicetree node and
initialising them.
This broke drivers such as dwc3 which manages PHYs themself as the PHYs
would now be initialised twice, something which specifically can lead to
resources being left enabled during suspend (e.g. with the
usb_phy_generic PHY driver).
As the dwc3 driver uses driver-name matching for the xhci platform
device, fix this by only looking up and initialising PHYs for devices
that have been matched using OF.
Note that checking that the platform device has a devicetree node would
currently be sufficient, but that could lead to subtle breakages in case
anyone ever tries to reuse an ancestor's node.
Fixes: 7b8ef22ea5 ("usb: xhci: plat: Add USB phy support")
Fixes: 9134c1fd0503 ("usb: xhci: plat: Add USB 3.0 phy support")
Cc: stable@vger.kernel.org # 4.1
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Stanley Chang <stanley_chang@realtek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Tested-by: Stanley Chang <stanley_chang@realtek.com>
Link: https://lore.kernel.org/r/20231103164323.14294-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7e7efdda6adb385fbdfd6f819d76bc68c923c394 upstream.
My prior race fix here broke CQM when ranges aren't used, as
the reporting worker now requires the cqm_config to be set in
the wdev, but isn't set when there's no range configured.
Rather than continuing to special-case the range version, set
the cqm_config always and configure accordingly, also tracking
if range was used or not to be able to clear the configuration
appropriately with the same API, which was actually not right
if both were implemented by a driver for some reason, as is
the case with mac80211 (though there the implementations are
equivalent so it doesn't matter.)
Also, the original multiple-RSSI commit lost checking for the
callback, so might have potentially crashed if a driver had
neither implementation, and userspace tried to use it despite
not being advertised as supported.
Cc: stable@vger.kernel.org
Fixes: 4a4b816950 ("cfg80211: Accept multiple RSSI thresholds for CQM")
Fixes: 37c20b2effe9 ("wifi: cfg80211: fix cqm_config access race")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4a778303ea0fcabcaff974721477a5743e1f8ec upstream.
Retrieve rs485 devicetree properties on registration of sc16is7xx ports in
case they are attached to an rs485 transceiver.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
Link: https://lore.kernel.org/r/20230807214556.540627-7-hugo@hugovil.com
Cc: Hugo Villeneuve <hugo@hugovil.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77a82cebf0eb023203b4cb2235cab75afc77cccf upstream.
According to the IOControl register bits description in the page 31 of
the product datasheet, we know the bit 3 of IOControl register is
softreset, this bit will self-clearing once the reset finish.
In the probe, the softreset bit is set, and when we read this register
from debugfs/regmap interface, we found the softreset bit is still
setting, this confused us for a while. Finally we found this register
is cached, to read the real value from register, we could put it
into the regmap_volatile().
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20230724034727.17335-1-hui.wang@canonical.com
Cc: Hugo Villeneuve <hugo@hugovil.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35b464e32c8bccef435e415db955787ead4ab44c upstream.
The DISPLAY_CLEAR command on the NewHaven NHD-0220DZW-AG5 display
does NOT change the DDRAM address to 00h (home position) like the
standard Hitachi HD44780 controller. As a consequence, the starting
position of the initial string LCD_INIT_TEXT is not guaranteed to be
at 0,0 depending on where the cursor was before the DISPLAY_CLEAR
command.
Extract of DISPLAY_CLEAR command from datasheets of:
Hitachi HD44780:
... It then sets DDRAM address 0 into the address counter...
NewHaven NHD-0220DZW-AG5 datasheet:
... This instruction does not change the DDRAM Address
Move the cursor home after sending DISPLAY_CLEAR command to support
non-standard LCDs.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: David Reaver <me@davidreaver.com>
Link: https://lore.kernel.org/r/20230722180925.1408885-1-hugo@hugovil.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5de0434bc064606d6b7467ec3e5ad22963a18c04 upstream.
When the send protocol versioning was added in 5.16 e77fbf9903
("btrfs: send: prepare for v2 protocol"), the 32/64bit compat code was
not updated (added by 2351f431f7 ("btrfs: fix send ioctl on 32bit with
64bit kernel")), missing the version struct member. The compat code is
probably rarely used, nobody reported any bugs.
Found by tool https://github.com/jirislaby/clang-struct .
Fixes: e77fbf9903 ("btrfs: send: prepare for v2 protocol")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d410d5efe04e42a6cd959bfe6d59d559fdf8b25 upstream.
When getting a chunk map, at btrfs_get_chunk_map(), we do some sanity
checks to verify we found a chunk map and that map found covers the
logical address the caller passed in. However the messages aren't very
clear in the sense that don't mention the issue is with a chunk map and
one of them prints the 'length' argument as if it were the end offset of
the requested range (while the in the string format we use %llu-%llu
which suggests a range, and the second %llu-%llu is actually a range for
the chunk map). So improve these two details in the error messages.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ac1d13a55eb37d398b63e6ff6db4a09a2c9128c upstream.
kernel_write() requires the caller to ensure that the file is writable.
Let's do that directly after looking up the ->send_fd.
We don't need a separate bailout path because the "out" path already
does fput() if ->send_filp is non-NULL.
This has no security impact for two reasons:
- the ioctl requires CAP_SYS_ADMIN
- __kernel_write() bails out on read-only files - but only since 5.8,
see commit a01ac27be4 ("fs: check FMODE_WRITE in __kernel_write")
Reported-and-tested-by: syzbot+12e098239d20385264d3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=12e098239d20385264d3
Fixes: 31db9f7c23 ("Btrfs: introduce BTRFS_IOC_SEND for btrfs send/receive")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fba5a571858ce2d787fdaf55814e42725bfa895 upstream.
At btrfs_get_chunk_map() we get the extent map for the chunk that contains
the given logical address stored in the 'logical' argument. Then we do
sanity checks to verify the extent map contains the logical address. One
of these checks verifies if the extent map covers a range with an end
offset behind the target logical address - however this check has an
off-by-one error since it will consider an extent map whose start offset
plus its length matches the target logical address as inclusive, while
the fact is that the last byte it covers is behind the target logical
address (by 1).
So fix this condition by using '<=' rather than '<' when comparing the
extent map's "start + length" against the target logical address.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f91192cd68591c6b037da345bc9fcd5e50540358 upstream.
In btrfs_ref_tree_mod(), when !parent 're' was allocated through
kmalloc(). In the following code, if an error occurs, the execution will
be redirected to 'out' or 'out_unlock' and the function will be exited.
However, on some of the paths, 're' are not deallocated and may lead to
memory leaks.
For example: lookup_block_entry() for 'be' returns NULL, the out label
will be invoked. During that flow ref and 'ra' are freed but not 're',
which can potentially lead to a memory leak.
CC: stable@vger.kernel.org # 5.10+
Reported-and-tested-by: syzbot+d66de4cbf532749df35f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d66de4cbf532749df35f
Signed-off-by: Bragatheswaran Manickavel <bragathemanick0908@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2db313205f8b96eea467691917138d646bb50aef upstream.
There is a feature request to add dmesg output when unmounting a btrfs.
There are several alternative methods to do the same thing, but with
their own problems:
- Use eBPF to watch btrfs_put_super()/open_ctree()
Not end user friendly, they have to dip their head into the source
code.
- Watch for directory /sys/fs/<uuid>/
This is way more simple, but still requires some simple device -> uuid
lookups. And a script needs to use inotify to watch /sys/fs/.
Compared to all these, directly outputting the information into dmesg
would be the most simple one, with both device and UUID included.
And since we're here, also add the output when mounting a filesystem for
the first time for parity. A more fine grained monitoring of subvolume
mounts should be done by another layer, like audit.
Now mounting a btrfs with all default mkfs options would look like this:
[81.906566] BTRFS info (device dm-8): first mount of filesystem 633b5c16-afe3-4b79-b195-138fe145e4f2
[81.907494] BTRFS info (device dm-8): using crc32c (crc32c-intel) checksum algorithm
[81.908258] BTRFS info (device dm-8): using free space tree
[81.912644] BTRFS info (device dm-8): auto enabling async discard
[81.913277] BTRFS info (device dm-8): checking UUID tree
[91.668256] BTRFS info (device dm-8): last unmount of filesystem 633b5c16-afe3-4b79-b195-138fe145e4f2
CC: stable@vger.kernel.org # 5.4+
Link: https://github.com/kdave/btrfs-progs/issues/689
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
